Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 52745-1297 FFC/FPC connector with 0.020" pitch, GOLD finish, and 39u plating thickness. Ideal for board mounting in commercial applications due to its 12 contacts, WHITE insulator color, and GLASS FILLED POLYAMIDE material. Operating temperature range from -20 to 85 °C with UL flammability rating of 94V-0.
Median Price
$0.946
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Arrow
1+ parts
$0.694
100+ parts
$0.639
1k+ parts
$0.627
10k+ parts
-
Distrelec
$1.470
$1.416
$1.383
Mouser Electronics
$1.520
$1.100
$0.943
$0.879
DigiKey
$1.530
$1.075
Element14
$2.300
$1.560
$1.310
Adafruit Industries
$12.332
$11.222
$10.112
Avnet
$0.802
PEI Genesis
Chip1Stop
$0.706
$0.621
Master Electronics
$0.911
Newark
$0.998
$0.961
Verical
$0.980
$0.870
Powell Electronics
TTI
$0.714
$0.679
Farnell
$0.638
$0.625
Digiode
$0.659
Nova Conductors
$0.790
TME
$1.420
$0.960
$0.830
NAC Semi
$0.676
Vyrian
IBS Electronics
$1.119
$1.005
VNN
Bristol Electronics
ComSIT Distribution GmbH
Semtec, LLC
Prism Electronics
Semi Source
J2 Sourcing AB
CoreStaff
$0.302
$0.283
$0.282
Semicontronic
$0.590
$0.575
$0.572
Corphita
Argo Parts USA
Netroflash
$0.751
$0.735
Continental Prestige Electronics
$0.928
$0.783
$0.617
Andel Nordic
$1.844
$1.770
Aztec Data Supply Inc.
$4.530
Advanced Electronics
Abacus Technologies
Kepictronics
GreenTree Electronics
Authorized Procurement Solutions
Assy Fe
Infinite Electronics LLP (Excess)
Perfect Parts
Cyclops Electronics Ltd (Excess)
Eastek
The close proximity of contacts allows for efficient signal transmission and space-saving design.
A compact body length ensures compatibility with various equipment and systems.
High insulation resistance helps prevent signal interference and ensures reliable performance.
A slim body width contributes to space-saving and compatibility with different layouts.
Offers sufficient voltage protection to prevent electrical breakdown and ensure safety.
Gold finish provides excellent conductivity, corrosion resistance, and longevity.
A moderate body depth allows for secure contact and connection stability.
The use of glass-filled polyamide ensures durability, heat resistance, and reliable insulation.
Can operate efficiently within a wide temperature range, suitable for various environments.
Capable of functioning in low-temperature conditions without compromising performance.
A sufficient plating thickness ensures good conductivity and protection against corrosion.
Designed specifically for FFC and FPC applications, ensuring compatibility and optimal performance.
Phosphor bronze offers excellent electrical conductivity and resilience to repeated use.
Compliant with UL 94V-0 standard for flame resistance, ensuring safety in case of fire.
Capable of handling high signal currents, ensuring reliable signal transmission.
White color for easy identification and aesthetic appeal.
Compliant with UL standards for quality and safety assurance.
Provides ample connection points for versatile applications and configurations.
Designed for repeated use with high durability, suitable for long-term applications.
Suitable for mounting on circuit boards, offering secure attachment and stability.
Standard terminal pitch for compatibility with various devices and systems.
Rectangular contact pattern for efficient signal transmission and secure connection.
Surface mount termination for easy installation and secure connection to the PCB.
Zero insertion force design for easy insertion and removal of connectors without excessive force.
Female contacts for compatibility with male connectors, ensuring proper mating.
Low contact resistance for efficient signal transmission and minimal energy loss.
Right-angle mounting style for space-saving and ergonomic connection setup.
Bellowed contact style for flexibility and durability in demanding applications.
Zero insertion force design for easy and secure insertion of connectors.
Locking mounting option for secure attachment and stability during operation.
Commercial-grade reliability for consistent performance in various applications and environments.
Headers & Edge Type Connectors 52745-1297 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
52745-1297 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Multiple Devices 21/Jun/2013
PCN Assembly/Origin - Mult Devs Location 11/Aug/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
M39029/56351
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Comchip Technology
61306421021
Wuerth Elektronik & Kg
Wurth Elektronik 61306421021 is a 64-contact board connector with 0.1" pitch, suitable for commercial applications. It features gold over nickel termination, polybutylene terephthalate insulator, and operates b/w -40 to 125°C. Ideal for PCBs requiring reliable signal transmission at up to 3A current rating.
SM02B-BHSS-1-TB(LF)(SN)
J S T Mfg
SM02B-BHSS-1-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.138" pitch, 0.295" length, and 0.126" width. Ideal for SURFACE MOUNT applications, it features FEMALE contact gender, BRASS material, and POLYAMIDE insulator.
7-188275-8
TE Connectivity
TE Connectivity 7-188275-8 is a 2-row, 8-contact board connector with 0.05" pitch. With insulation resistance of 1Gohm and rated voltage of 100V, it's ideal for PCB applications. Featuring POLYAMIDE46 insulator material, this header has a temperature range from -40 to +105 °C.
1-640456-6
TE Connectivity 1-640456-6 is a board connector with 16 contacts, 0.1" pitch, and 5A signal rating. It features tin finish, glass-filled polyester insulator, and operates b/w -55 to 105°C. Ideal for commercial applications requiring reliable male connectors on PCBs.
MTCB2X-XXX-205CS061
BOARD CONNECTOR;
0906.148.6901
Harting Electronics & Kg
0906.148.6901 by Harting Electronics & Kg is a 3-row, 48-contact board Euro connector with a mating contact pitch of 0.2". It features polarization key for polarized housing and rated current of 6A, suitable for commercial applications requiring reliable connections on PCBs with a spacing of 2.54mm b/w rows A, B, and C.
2-1761603-5
TE Connectivity 2-1761603-5 is a dual-row board connector with 14 contacts, rated at 1A. It features a contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable male connectors with solder termination in blue color.
746-060-520-601
Edac
Edac 746-060-520-601 is a CARD EDGE CONNECTOR with 60 contacts, rated at 3A signal current. It has a mating pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage rating of 1500VAC. Ideal for board mounting applications requiring high reliability in temperatures ranging from -40 to 105°C.
90120-0762
Molex 90120-0762 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring bright tin finish, it offers 3A signal current rating and withstands up to 1000VAC. With a durable design lasting 30 cycles, this male connector is ideal for PCB mounting with solder termination.
502774-0891
Molex 502774-0891 is a PCB connector with 8 contacts, 0.043" pitch, and surface mount termination. Its compact dimensions of 0.563" x 0.071" x 0.63" make it ideal for right-angle mounting applications in electronics.
DF40C-100DS-0.4V(58)
Hirose Electric
DF40C-100DS-0.4V(58) by Hirose Electric is a 2-row, 100-contact board stacking connector with gold termination finish. Featuring liquid crystal polymer insulator, it offers 50000000 ohm insulation resistance and 100VAC dielectric voltage. Ideal for commercial applications requiring signal current of 0.3A, operating b/w -35 to 85°C temperature range.
PHDR-10VS
PHDR-10VS by J S T Mfg is a 2-row BOARD CONNECTOR with 10 contacts, rated at 3A signal current. Featuring POLYAMIDE66 insulation material, it offers an insulation resistance of 1Gohm and withstands up to 800VAC. Ideal for applications requiring a mating contact pitch of 0.079 inches, such as cable mounting with crimp termination in electronics assemblies.
DF40C-100DS-0.4V(51)
DF40C-100DS-0.4V(51) by Hirose Electric is a 100-contact board stacking connector with 0.016" mating pitch, 50000000 ohm insulation resistance, and 100VAC dielectric voltage. Ideal for applications requiring high durability and reliability in commercial settings with -35 to 85 °C operating temperature range.
307-074-422-208
Edac 307-074-422-208 is a 74-contact card edge connector with 0.156" pitch, suitable for PCBs with 2 rows. It features a dielectric voltage of 2545VAC and insulation resistance of 5000000000 ohm. With UL94V-0 flammability rating, it's ideal for applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
2-1761603-3
TE Connectivity 2-1761603-3 is a dual-row board connector with 10 contacts, rated at 1A. It features a contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
M22-2521005
Harwin Plc
The Harwin PLC M22-2521005 is a 20-contact male board connector with gold finish, suitable for commercial applications. Featuring a mating contact pitch of 0.079", insulation resistance of 100M ohm, and operating temperature range from -55 to 105°C, it offers reliable connectivity in various electronic devices. Ideal for PCB mounting with a terminal pitch of 2mm, this durable connector has a UL flammability rating of 94V-0.
1-1761606-3
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; UL Flammability Code: 94V-0; Total No. of Contacts: 40;
15-91-0100
Molex 15-91-0100 is a 2-row, 10-contact board connector with 0.1" pitch. It features matte tin over nickel finish, glass-filled liquid crystal polymer insulator, and brass contacts. Suitable for PCB applications with operating temperatures from -40°C to 120°C, UL94V-0 rated for reliability in commercial settings.
22-03-5045
The Molex 22-03-5045 is a board connector with 4 contacts, featuring a mating contact pitch of 0.098", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
FTSH-105-01-F-DV-K-A-P
Samtec
Samtec's FTSH-105-01-F-DV-K-A-P is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash finish and operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, male straight pin-skt connector for surface mount termination on PCBs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
52746-1071
Molex 52746-1071 FFC/FPC connector with 10 contacts, gold finish, and white insulator. Suitable for board mounting with a mating pitch of 0.020", operating from -40 to 85°C. Ideal for commercial applications requiring a durable, surface-mountable connector with UL certification.
52746-1471
Molex 52746-1471 FFC/FPC connector with 14 contacts, gold termination finish, and white insulator. Ideal for board mounting with a mating contact pitch of 0.020 inch. Operating temperature range from -40 to 85 °C, suitable for commercial applications requiring durability and reliability.
52746-0471
The Molex 52746-0471 FFC/FPC connector has a mating contact pitch of 0.020", insulation resistance of 50M ohm, and dielectric voltage rating of 350VAC. Ideal for board mounting applications, this connector features gold over nickel termination finish and polyamide insulator material. With a durability of 20 cycles, it is suitable for commercial use in electronics requiring reliable signal connections.
52746-0671
The Molex 52746-0671 is a FFC/FPC connector with a mating contact pitch of 0.020", insulation resistance of 50MΩ, and dielectric withstand voltage of 350VAC. It is commonly used in board mounting applications and has a durability of 20 cycles.
52746-2071
Molex 52746-2071 is a FFC/FPC connector with 20 contacts, 0.020" pitch, and 50000000 ohm insulation resistance. Ideal for board mounting applications, it has a temperature range of -40 to 85 °C and UL94V-0 flammability rating.
52746-1671
Molex 52746-1671 FFC/FPC connector has 16 contacts with 0.020" pitch, GOLD OVER NICKEL finish. Ideal for board mounting with POLYAMIDE insulator, it operates b/w -40 to 85°C. Suitable for commercial applications requiring a durable, right-angle mounting solution.
52746-1271
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 350VAC; Terminal Pitch (mm): .5;
52745-1097
The Molex 52745-1097 is a FFC/FPC connector with a mating contact pitch of 0.020 inches and a body length of 0.437 inches. It has an insulation resistance of 50M ohm and can withstand a dielectric voltage of 250VAC. This connector is commonly used in board mounting applications and has a durability of 20 cycles.
52746-0771
The Molex 52746-0771 FFC/FPC connector has a mating contact pitch of 0.020", insulation resistance of 50M ohm, and dielectric voltage rating of 350VAC. Ideal for board mounting applications, it features a white insulator, gold over nickel termination finish, and is designed for commercial reliability in electronics assemblies.
52745-2097
Molex 52745-2097 FFC/FPC connector has 20 contacts with 0.020" pitch, gold termination finish, and 50000000 ohm insulation resistance. Ideal for board mounting applications in commercial settings due to its durability, UL certification, and -20 to 85°C operating temperature range.
52746-0871
The Molex 52746-0871 FFC/FPC connector has a mating contact pitch of 0.020", insulation resistance of 50M ohm, and dielectric voltage rating of 350VAC. Ideal for board mounting applications, this connector features a white insulator, gold over nickel termination finish, and is UL recognized with a flammability rating of 94V-0.
52745-0897
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; PCB Contact Pattern: RECTANGULAR;
52745-0497
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Insulator Material: GLASS FILLED POLYAMIDE;
52746-1033
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 500VAC; Maximum Insertion Force (N): ZIF; Insulator Material: GLASS FILLED POLYAMIDE; PCB Contact Pattern: RECTANGULAR;
52745-1096
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 350VAC; Maximum Insertion Force (N): ZIF;
52746-1871
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 350VAC; Mixed Contacts: NO;
52746-0971
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 350VAC; No. of Rows Loaded: 1;
52746-1084
FFC/FPC CONNECTOR;
52745-0896
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 350VAC; PCB Contact Pattern: RECTANGULAR;
52745-1259
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; No. of PCB Rows: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved