Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 52207-2060 FFC/FPC connector with 20 contacts, 1A signal current rating, and 30 durability cycles. Ideal for board mounting in commercial applications with -30 to 85°C operating range. Features ZIF termination, POLYAMIDE insulator, and UL94V-0 flammability rating.
Median Price
$2.000
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Element14
1+ parts
$2.381
100+ parts
$1.814
1k+ parts
-
10k+ parts
Mouser Electronics
$2.480
$1.830
$1.640
$1.440
Newark
$2.040
$1.760
Arrow
$2.565
$1.755
$1.366
DigiKey
$2.600
$1.821
Adafruit Industries
$6.259
$5.696
$5.132
Master Electronics
$1.550
$1.400
Verical
$1.620
$1.470
TTI
$1.330
$1.260
Chip1Stop
$1.530
Heilind Electronics
$1.381
Interstate Connecting
TestEquity
$0.840
Nova Conductors
Digiode
$2.138
Rapid Electronics
$893.958
IBS Electronics
$1.225
$1.087
Vyrian
Cyclops Electronics Ltd
VNN
Netroflash
Continental Prestige Electronics
$1.900
$1.480
Corphita
$2.025
Andel Nordic
$2.659
$2.552
Advanced Electronics
Perfect Parts
Glotronic Ltd.
Authorized Procurement Solutions
Kepictronics
Close contact pitch allows for compact design and efficient signal transmission.
Adequate length for proper connectivity and stability.
High insulation resistance ensures reliable performance and prevents signal interference.
Narrow body width saves space on the board and allows for more connectors in a limited area.
Withstands high voltage levels, ensuring safety and durability.
Polyamide offers good mechanical strength and resistance to heat, making it suitable for various applications.
Can operate at relatively high temperatures, suitable for diverse environments.
Can function in low temperature settings, ensuring reliability in various conditions.
Thin plating ensures good conductivity while reducing the overall weight of the connector.
Designed for specific applications requiring flexibility and space-saving solutions.
UL 94V-0 rating indicates high fire resistance, promoting safety in electronics.
Able to handle decent current for signal transmission without overheating.
Neutral color blends well with various PCB designs and aesthetics.
Complies with industry standards for quality and safety assurance.
Sufficient contacts for multiple connections in one connector, reducing the need for additional components.
Able to withstand repetitive insertions and removals, ensuring longevity.
Suitable for mounting directly on the board for secure attachment and stability.
Rectangular contact pattern offers a stable connection and easy alignment during assembly.
Ideal for surface mounting on PCBs, saving space and simplifying the assembly process.
Low withdrawal force makes it easy to disconnect without damage, ideal for delicate components.
Female contacts ensure proper mating and secure connections with male counterparts.
Low contact resistance ensures efficient signal transmission and minimal power loss.
Receptacle style provides a secure housing for the contacts, protecting them from external elements.
Right-angle mounting allows for efficient routing of cables and saves space on the board.
Bellowed contacts provide flexibility and tolerance for variations in mating alignment.
Low insertion force prevents damage during connection and ensures a secure fit.
Locking feature ensures the connector remains securely attached, even in harsh conditions.
Rectangular contact pattern offers stability and efficient signal transmission.
Designed for commercial use with reliable performance and durability in various applications.
Headers & Edge Type Connectors 52207-2060 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
52207-2060 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - 52207 Series Location 02/Jun/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Formosa Microsemi
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
Sangdest Microelectronics (Nanjing)
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
684-4151-0-51
Hirose Electric
The Hirose Electric 684-4151-0-51 is a board stacking connector with 100 contacts, 0.016" mating contact pitch, and 50000000 ohm insulation resistance. It is used in applications requiring a durable, polarized housing with liquid crystal polymer insulator material for PCB mounting at temperatures ranging from -35 to 85 °C.
51952-270LF
AMPHENOL ICC
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
BM03B-GHS-TBT(LF)(SN)(N)
J S T Mfg
BM03B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a 3-contact BOARD CONNECTOR with Tin (Sn) finish. Made of Phosphor Bronze, it has 1.25mm terminal pitch for SURFACE MOUNT application on boards. UL Flammability Code: 94V-0, ideal for various electronic devices.
B2B-XH-A(LF)(SN)
B2B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. Ideal for applications requiring a male contact gender, solder termination, and operating temperatures from -25 to 85 °C.
GHR-05V-S
GHR-05V-S by J S T Mfg is a 5-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure electrical connections in compact spaces.
50-57-9005
Molex
The Molex 50-57-9005 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It features glass filled polyester insulator material and UL 94V-0 flammability code. Ideal for commercial applications requiring a reliable 5-contact female connector with crimp termination on cable mounting.
ADM6-60-01.5-L-4-2-A
Samtec
BOARD STACKING CONNECTOR; Termination Contact Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3;
746-062-520-601
Edac
Edac 746-062-520-601 is a 62-contact card edge connector with 0.125" pitch, suitable for PCBs. Featuring 3A signal current rating, it has a dielectric strength of 1500VAC and operates b/w -40 to 105°C. Ideal for applications requiring high insulation resistance and UL94V-0 flammability compliance.
831-43-030-30-002000
Mill-max Mfg
831-43-030-30-002000 by Mill-max Mfg is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 2mm and is for SURFACE MOUNT applications. This FEMALE SOCKET connector mounts STRAIGHT on the board.
S3B-XH-A-GU
S3B-XH-A-GU by J S T Mfg is a 3-contact board connector with brass contacts and tin finish. It features a terminal pitch of 2.5mm, suitable for right angle mounting applications. This UL 94V-0 rated connector is ideal for various electronic devices requiring secure soldered connections.
851-47-053-10-002000
BOARD CONNECTOR; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: GOLD;
22-04-1021
Molex 22-04-1021 header connector features 0.098" mating contact pitch, 1000000000 ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board connections in applications requiring a durable, polarized housing with male SQ pin-skt contacts.
87437-0373
The Molex 87437-0373 is a board connector with 0.059" mating contact pitch, 1000000000 ohm insulation resistance, and 700VAC dielectric voltage. Ideal for commercial applications, it features a polarized housing, surface mount termination, and can handle temperatures from -55 to 105 °C.
GHR-08V-S
GHR-08V-S by J S T Mfg is an 8-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable connections in electronic devices.
22-55-2201
The Molex 22-55-2201 is a board connector with 20 contacts, 0.1" pitch, and 0.999" body length. It is used in commercial applications with -40 to 120°C operating temperature range for cable mounting via crimp termination.
TSW-104-07-T-S
Samtec TSW-104-07-T-S is a 4-contact board connector with 0.1" pitch, suitable for commercial applications. It features phosphor bronze contacts with matte tin finish and operates b/w -55°C to 105°C. The connector has a black insulator made of polybutylene terephthalate, UL94V-0 rated, and uses solder termination.
SF56S006V4BR2000
Japan Aviation Electronics Industry
PCB CONNECTOR; Option: GENERAL PURPOSE; JESD-609 Code: e4; MIL Conformity: NO; Mating Contact Finish: GOLD OVER NICKEL; DIN Conformance: NO;
09-50-3031
Molex 09-50-3031 is a board connector with 0.156" mating contact pitch, 0.464"x.25"x.625" body dimensions, and polyamide insulator material. It has 3 contacts, female gender, and bellowed type contact style for cable mounting applications. The UL-approved connector features a natural insulator color and locking mounting option for commercial reliability.
S5B-PH-SM4-TB(LF)(SN)
S5B-PH-SM4-TB(LF)(SN) by J S T Mfg is a 5-contact board connector with tin finish over copper. It has a terminal pitch of 2mm and is surface mountable, suitable for right angle mounting applications. Ideal for use in electronics requiring male contact gender and UL94V-0 flammability rating.
746-012-520-606
Edac 746-012-520-606 is a 2-row card edge connector with 12 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage rating of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
52207-1160
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Termination Type: SURFACE MOUNT; JESD-609 Code: e3;
52207-1833
The Molex 52207-1833 FFC/FPC connector has a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. It is used in board mounting applications for signal currents up to 1A, with a durability of 30 cycles.
52207-0860
Molex 52207-0860 FFC/FPC Connector has 8 contacts with 0.039" pitch, rated for 1A signal current. Ideal for board mounting in applications requiring right-angle receptacle with surface mount termination. Operating temperature range -30 to 85°C, UL94V-0 flammability rating ensures safety and reliability.
52207-1033
The Molex 52207-1033 is a FFC/FPC connector with 10 contacts, 0.039" pitch, and 39u plating thickness. Ideal for board mounting applications, it has a durability of 30 cycles and operates b/w -30°C to 85°C. With UL94V-0 flammability rating, it offers reliable performance in commercial settings.
52207-0460
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; UL Flammability Code: 94V-0; Body or Shell Style: RECEPTACLE; Mating Contact Finish: NOT SPECIFIED;
52207-0433
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Durability: 30 Cycles;
52207-1085
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; Contact Pattern: RECTANGULAR;
52207-0660
The Molex 52207-0660 FFC/FPC connector features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 700VAC. Ideal for board mounting applications, this right-angle receptacle connector offers a durable design with a surface mount termination type and is suitable for commercial use in various electronic devices.
52207-1060
The Molex 52207-1060 is a FFC/FPC connector with 10 contacts, 0.039" pitch, and 100M ohm insulation resistance. Ideal for board mounting applications, it features a polarization key, tin finish, and operates b/w -30°C to 85°C.
52207-1260
Molex 52207-1260 is a FFC/FPC connector with 12 contacts, 0.039" pitch, and 0.693" body length. Ideal for surface mount applications in commercial settings due to its tin finish and UL94V-0 flammability rating.
52207-1133
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; DIN Conformance: NO;
52207-0633
The Molex 52207-0633 is a FFC/FPC connector with a mating contact pitch of 0.039", body length of 0.421", and insulation resistance of 100MΩ. It is commonly used in board mounting applications and has a durability of 30 cycles.
52207-1660
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; MIL Conformity: NO; Mating Contact Pitch (inch): 0.039;
52207-2085
The Molex 52207-2085 FFC/FPC connector features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage withstand of 500VAC. Ideal for board mounting applications, this connector has a body length of 1.035", operates b/w -30 to 85°C, and offers a rated current of 1A for signal transmission.
52207-1233
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Contact Pattern: RECTANGULAR;
52207-2033
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Body Width: .106 inch;
52207-0833
The Molex 52207-0833 is a FFC/FPC connector with 8 contacts, rated at 1A signal current. It features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and dielectric voltage rating of 250VAC. Ideal for board mounting applications requiring durability and reliability in commercial settings.
52207-0885
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; PCB Contact Pattern: RECTANGULAR;
52207-0485
FFC/FPC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; IEC Conformity: NO;
52207-0960
Molex 52207-0960 is a FFC/FPC connector with 9 contacts, 0.039" pitch, and TIN finish. Ideal for board mounting in applications requiring a right-angle receptacle with POLYAMIDE46 insulator material and UL94V-0 flammability rating.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved