Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD STACKING CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Median Price
$0.576
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.980
100+ parts
$0.708
1k+ parts
$0.602
10k+ parts
$0.463
Mouser Electronics
$0.599
$0.530
$0.462
Newark
-
$0.631
Verical
$0.500
Master Electronics
$0.520
Chip1Stop
$0.515
Powell Electronics
$0.510
Farnell
$1.249
Vyrian
$0.490
TestEquity
Digiode
$0.931
IBS Electronics
TME
$1.300
Corphita
$0.882
Andel Nordic
$6.300
$6.048
Headers & Edge Type Connectors 5046187012 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
5046187012 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Intersil
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
Zetex Plc
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Semiconductor Technology
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
71918-120LF
Amphenol Communications Solutions
71918-120LF by Amphenol is a 20-contact board connector with 0.1" mating contact pitch, suitable for commercial applications. Featuring a 2-row PCB layout and UL-rated insulation material, it offers a rated current of 3A and operates b/w -65°C to 125°C temperature range.
B2B-XH-A(LF)(SN)
J S T Mfg
B2B-XH-A(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. Ideal for applications requiring a male contact gender, solder termination, and operating temperatures from -25 to 85 °C.
51021-0600
Molex
The Molex 51021-0600 is a board connector with 6 contacts, 0.049" pitch, and 353VAC voltage withstand. Ideal for commercial applications, it has a temperature range of -40 to 105°C and features crimp termination for durability in cable mounting setups.
DF19-20S-1C
Hirose Electric
DF19-20S-1C by Hirose Electric is a 20-contact FFC/FPC connector with 0.039" pitch, 300VAC dielectric voltage, and -35 to 85°C operating range. Ideal for commercial applications, it features a polarized housing, bellowed contact design, and crimp termination for reliable signal transmission in cable assemblies.
XHP-4-M
XHP-4-M by J S T Mfg is a 4-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It features FEMALE contact gender, CABLE mounting type, and CRIMP termination. Ideal for applications requiring secure cable connections in electronic devices.
DTM06-3S-E007
TE Connectivity
TE Connectivity's DTM06-3S-E007 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized housing and UL flammability rating of 94V-0.
22-01-3067
The Molex 22-01-3067 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.622 inch. It has an insulation resistance of 1000000000 ohm and can withstand a dielectric voltage of 700VAC. This connector is commonly used in commercial applications due to its durability, removable contact block design, and polarization key feature.
DT06-6S-EP06
TE Connectivity's DT06-6S-EP06 is a 2-row board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this polarized connector has a total of 6 contacts and UL certification.
B2B-PH-SM4-TB(LF)(SN)(P)
B2B-PH-SM4-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with COPPER ALLOY contacts and TIN finish. Featuring 2 contacts, it has a terminal pitch of 2mm and UL 94V-0 flammability rating. Ideal for surface mount applications in headers & edge type connectors.
B2B-XH-A-GU
B2B-XH-A-GU by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and TIN finish. It has a terminal pitch of 2.5mm and is used for BOARD mounting applications requiring male connectors with solder termination.
SM02B-BHSS-1-TB(LF)(SN)
SM02B-BHSS-1-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.138" pitch, 0.295" length, and 0.126" width. Ideal for SURFACE MOUNT applications, it features FEMALE contact gender, BRASS material, and POLYAMIDE insulator.
10124017-1022121LF
Amphenol's 10124017-1022121LF is a board stacking connector with 21 contacts, gold flash termination finish, and liquid crystal polymer insulator. It has a mating contact pitch of 0.039", dielectric voltage withstand of 707VAC, and rated signal current of 1A. Ideal for applications requiring durable male connectors with staggered PCB mounting pattern.
26-60-4030
Molex 26-60-4030 is a board connector with 3 contacts, featuring matte tin finish and glass-filled polyester insulator. With 1000000000 ohm insulation resistance, it offers durability of 25 cycles. Ideal for commercial applications requiring reliable connections in straight mounting style.
BM04B-GHS-TBT(LF)(SN)
BM04B-GHS-TBT(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.049" pitch, POLYAMIDE9T insulator, and 500VAC dielectric voltage. Ideal for applications requiring a male connector with surface mount termination, operating b/w -25 to 85 °C, UL-rated for flammability.
B6BZR(LF)(SN)
B6BZR(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" mating contact pitch, 500VAC dielectric voltage, and 1A signal current rating. It is used in commercial applications, featuring GLASS FILLED POLYAMIDE insulation material and BRASS contact material for reliability.
22-05-2041
Molex 22-05-2041 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulator material, BRASS contact material, and Tin (Sn) - Nickel (Ni) termination finish, it offers high durability with 25 cycles. Ideal for commercial applications requiring a reliable connection in a compact form factor.
MM60-52B1-E1-R650
Japan Aviation Electronics Industry
MM60-52B1-E1-R650 by Japan Aviation Electronics is a 52-contact card edge connector with gold over nickel finish. It has a mating contact pitch of 0.031", operates b/w -40 to 80°C, and offers a dielectric voltage of 424VAC. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
DF19G-20S-1C(06)
DF19G-20S-1C(06) by Hirose Electric is a FFC/FPC connector with 0.039" pitch, 500M ohm insulation resistance, and 300VAC dielectric voltage. Ideal for applications requiring a durable, female socket connector with 20 contacts, UL-rated at 94V-0 flammability for temperatures ranging from -35 to 85°C.
1410189-3
TE Connectivity 1410189-3: Headers & Edge Type Connector with 0.07" pitch, LCP insulator, and 1A signal current rating. Ideal for board connections in commercial applications due to its durability, UL certification, and polarization key feature.
15-91-0100
Molex 15-91-0100 is a 2-row, 10-contact board connector with 0.1" pitch. It features matte tin over nickel finish, glass-filled liquid crystal polymer insulator, and brass contacts. Suitable for PCB applications with operating temperatures from -40°C to 120°C, UL94V-0 rated for reliability in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved