Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 50397-8000 contact features crimp terminal type, square pin-socket design, and phosphor bronze material. Ideal for 51111 SERIES applications with wire sizes ranging from 28 AWG to 22 AWG. Mounting style is straight with a finish thickness of 35 for female contacts.
Median Price
$0.044
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$0.057
100+ parts
$0.023
1k+ parts
10k+ parts
-
DigiKey
$0.100
$0.042
$0.035
Distrelec
$0.249
$0.119
$0.054
$0.043
Mouser Electronics
$0.030
Master Electronics
Verical
$0.026
TTI
Newark
$0.063
Farnell
$0.021
Element14
$0.059
Chip1Stop
$0.019
Nova Conductors
$0.038
Digiode
IBS Electronics
TME
$0.050
Vyrian
VNN
Argo Parts USA
$0.037
Corphita
$0.051
Andel Nordic
$9.184
$8.817
Perfect Parts
EMSNET (Excess)
Assy Fe
Authorized Procurement Solutions
Futuretech Components
Kepictronics
Continental Prestige Electronics
$0.032
Netroflash
$0.036
This product is designed for the specific use of the 51111 series, ensuring compatibility and optimal performance.
The 35 finish thickness provides durability and long-lasting quality to ensure reliable connections.
The crimp terminal type allows for secure and efficient wire connections, saving time during assembly.
The chain contact design offers a stable and reliable connection for consistent performance.
The clearly labeled assembly item name makes it easy to identify and select the correct component for your project.
With a minimum wire size of 28 AWG, this product is suitable for a wide range of wire gauges for versatility.
The maximum wire size of 22 AWG accommodates larger wires while still maintaining a secure connection.
The female contact gender allows for easy mating with compatible male connectors for seamless assembly.
The straight mounting style offers a simple and straightforward installation process for convenience.
The square pin-socket contact style provides a stable and secure connection for reliable performance.
Constructed from phosphor bronze, this product offers excellent conductivity and durability for long-lasting use.
With a terminal length of 0.157 inch, this product provides a secure and reliable connection for your assembly needs.
Assembly Products 50397-8000 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603FR-0710KL
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
M39029/58-360
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
1-104480-6
TE Connectivity
TE Connectivity 1-104480-6 is a CRIMP terminal with 300V rated voltage, suitable for DISCRETE WIRE cables. Featuring a contact resistance of 12 mohm, it has a max operating temperature of 105°C and is approved by CSA and UL for various applications in POWER AND SIGNAL designs.
213823-2
TE Connectivity 213823-2 is a RECEPTACLE with Shell Size of 14. It has Max Operating Temp of 105°C and Min Operating Temp of -55°C. Made of ZINC ALLOY, it supports wire size up to 0 AWG, ideal for assembly applications.
2CTC-R
Adam Tech
The Adam Tech 2CTC-R is a CRIMP terminal with a rated current of 2A and contact resistance of 20 mohm. It supports wire sizes from 28 to 22 AWG, ideal for applications requiring FEMALE contacts in straight mounting style with SQ PIN-SKT design. Operating temperatures range from -25°C to 85°C.
142-1000-002
Cinch Connectivity Solutions
142-1000-002 by Cinch Connectivity Solutions is an SMA RF connector with MIL-C-39012 approvals. Featuring a finish thickness of 50µm, it is made of KOVAR material and operates b/w -55°C to 165°C. Ideal for feed-through applications in military-grade assemblies.
500588001
Molex
Molex 500588001 is a UL approved assembly product with crimp terminal type. It has a rated current of 1.5A, contact resistance of 20 mohm, and operating temperature range from -40 to 105 °C. Primarily used for 51021 HOUSING applications due to its FEMALE contact gender and BLADE PIN-SKT design.
0-0281934-2
TE Connectivity 0-0281934-2 SEALING ITEM has a temp range of -40 to 130°C, fits up to 0 AWG wire, and allows for cable entry of 2.4". Ideal for sealing applications in various industries.
W3S-P012
TE Connectivity's W3S-P012 is a POWER AND SIGNAL assembly item for DT SERIES. With a temp range of -55 to 125 °C, it accommodates wires up to 0 AWG. Made of POLYBUTYLENE TEREPHTHALATE, it serves as a WEDGE ITEM in various applications.
09330006102
Harting Electronics & Kg
09330006102 by Harting Electronics & Kg is a HAN E CONNECTOR with CRIMP terminals for 14 AWG wire. It has approvals for IEC 60664-1 and IEC 61984, rated at 16 A current with male contact gender. The CONTACT features copper alloy material, 1 mohm resistance, RND PIN-SKT style, and STRAIGHT mounting suitable for various assembly applications.
PCS-E36LKPB
Honda Tsushin Kogyo
CONNECTOR ACCESSORY; Mounting Option-1: M2.5; Material: ZINC ALLOY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: PROTECTIVE COVER;
WP-2S
WP-2S by TE Connectivity is an Assembly Product designed for DTP SERIES applications. It features a Max Operating Temperature of 125°C and Min Operating Temperature of -55°C. With a max wire size of 0 AWG, it is ideal for POWER AND SIGNAL assemblies using POLYBUTYLENE TEREPHTHALATE material.
9004440000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Assembly Item Name: FERRULE; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 20 AWG;
221-515/000-004
Wago
TERMINAL BLOCK ACCESSORY;
33000-1003
Molex 33000-1003 is a male contact assembly product for MX150 connectors. It features crimp terminals, copper alloy material, and can handle up to 10A current at 500V DC. With operating temperatures from -40°C to 105°C, it accommodates wire sizes up to 22 AWG in straight mounting applications.
13697408
Delphi Connection Systems
CONNECTOR ACCESSORY; Cable Types: FLRY-B; IEC Conformity: NO; Assembly Item Name: CONTACT; Maximum Cable Entry: .0748 inch; Minimum Cable Entry: .0551 inch;
6648400-1
TE Connectivity 6648400-1 is a POWER female contact with SOLDER terminal type. It has a rated current of 75A, suitable for wire sizes up to 0 AWG. With operating temperatures from -55°C to 105°C, it is ideal for high-power applications requiring reliable connections.
M80-0130005
Harwin Plc
The Harwin PLC M80-0130005 is a CRIMP terminal with operating temperatures ranging from -55°C to 125°C. It features a rated current of 3A, suitable for wire sizes b/w 28-24 AWG. This FEMALE contact with ROUND PIN-SOCKET design in BRASS material is ideal for SIGNAL applications requiring a STRAIGHT mounting style and 0.043" cable entry.
1727040098
Molex 1727040098 BACKSHELL is a zinc alloy assembly product for FCT D-SUB usage. It supports cable entry from 0.118" to 0.335", with operating temperatures ranging from -35°C to 100°C. Mounting options include 4-40 UNC screws, making it versatile for various applications.
1546641-1
CONNECTOR ACCESSORY; Rated Current: 1.5 A; Shielding: NO; Minimum Operating Temperature: -20 Cel; Design: SIGNAL; Maximum Wire Size: 0 AWG;
SZE-002T-P0.3
J S T Mfg
SZE-002T-P0.3 by J S T Mfg is a CRIMP terminal CONTACT for 28-24 AWG wires with 0.0299-0.0472 inch cable entry. It features FEMALE contact gender, STRAIGHT mounting style, and is made of COPPER ALLOY. Ideal for assembly products requiring precise wire connections in various applications.
39-00-0429
Molex 39-00-0429 is a power contact with square pin-socket style, suitable for 5557, 30067, 44516 or 42474 housing. Features crimp terminal type, 0.051" min cable entry and 0.122" max cable entry. Ideal for applications requiring female contacts in straight mounting style with brass material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
50394-8051
50394-8051 by Molex features crimp terminal type, bellowed contact design, and phosphor bronze material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 24 AWG. Suitable for straight mounting with a max cable entry of 0.055 inch.
50394-8100
Molex 50394-8100 is a crimp terminal with a contact design of loose and bellowed contact style. It has a finish thickness of 15 and is commonly used in assembly products for applications requiring female contacts, straight mounting style, and 0.093 inch terminal length.
50394-8052
Molex 50394-8052 is a crimp terminal with chain contact design, suitable for assembly products. It supports wire sizes from 30 AWG to 24 AWG and has a max cable entry of 0.055". The bellowed contact is made of phosphor bronze, ideal for applications requiring female contacts in straight mounting style.
50394-8200
CONNECTOR ACCESSORY; Contact Style: BELLOWED CONTACT; MIL Conformity: NO; DIN Conformity: NO; Mounting Style: STRAIGHT; Contact Gender: FEMALE;
50397-8100
50397-8100 by Molex is a female contact with crimp terminal type. It has a finish thickness of 35, suitable for 51111 SERIES applications. The contact design is loose, made of phosphor bronze material, and supports wire sizes ranging from 28 AWG to 22 AWG.
50394-8054
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Design: CHAIN; DIN Conformity: NO; Maximum Cable Entry: .055 inch; Finish Thickness: 5;
50394-8400
CONNECTOR ACCESSORY; Contact Style: BELLOWED CONTACT; IEC Conformity: NO; MIL Conformity: NO; Terminal Type: CRIMP; Additional Features: CONTACT FINISH: GOLD FLASH OVER NICKEL (79);
50394-8055
CONNECTOR ACCESSORY; Maximum Cable Entry: 1.4 inch; Contact Design: STAMPED; MIL Conformity: NO; IEC Conformity: NO; Maximum Wire Size: 24 AWG;
50398-8000
CONNECTOR ACCESSORY; MIL Conformity: NO; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO; Terminal Type: CRIMP; Contact Design: CHAIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved