Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD STACKING CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 350VAC; No. of Connectors: ONE; Body Length: .417 inch; Rated Current - Signal: .3 A;
Median Price
$0.254
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Newark
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.314
PEI Genesis
Master Electronics
$0.250
DigiKey
Chip1Stop
$0.253
Verical
$0.239
Farnell
$1.040
Vyrian
TestEquity
$0.270
IBS Electronics
TME
$0.267
Digiode
Assy Fe
Kepictronics
Corphita
Headers & Edge Type Connectors 5033044240 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
Contact Pattern:
Contact Resistance:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
5033044240 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
Gec Plessey Semiconductors
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DTM06-6S
TE Connectivity
DTM06-6S by TE Connectivity is a 2-row loaded board connector with a body length of 1.185", width of 0.6", and depth of 0.817". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used in applications requiring a polarized housing, such as cable mounting with strain relief.
2-640456-5
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Total No. of Contacts: 25; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
BM05B-SRSS-TBT(LF)(SN)
J S T Mfg
BM05B-SRSS-TBT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 5 contacts, COPPER ALLOY material, and TIN finish. It is a STRAIGHT mounting style connector for surface mount applications in headers & edge type connectors category.
26-60-6100
Molex
The Molex 26-60-6100 is a board connector with 10 contacts, featuring a dielectric voltage of 1000VAC and insulation resistance of 1Gohm. With a temperature range from -40 to 80°C, it is ideal for commercial applications requiring reliable connections in headers & edge type connectors.
1-1123723-2
TE Connectivity 1-1123723-2 is a board connector with 2 contacts, rated at 8A and 250V. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material, suitable for applications requiring durability and reliability in temperatures ranging from -25 to 105 °C.
PHR-3
PHR-3 by J S T Mfg is a 3-contact BOARD CONNECTOR with POLYAMIDE66 insulator. It has 0.079" contact pitch, 800VAC dielectric voltage, and -25 to 85 °C operating temp range. Ideal for CABLE mounting, it features FEMALE contacts with 20 mohm resistance and 0.019" min insulation diameter.
2-640456-2
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: COPPER ALLOY; IEC Conformity: NO; Mixed Contacts: NO;
53261-0471
Molex 53261-0471 is a 4-contact board connector with a mating contact pitch of 0.049 inches. It has a surface mount termination type and is suitable for commercial applications. The connector has a durability of 30 cycles and can operate in temperatures ranging from -40 to 105°C.
0906.148.6901
Harting Electronics & Kg
0906.148.6901 by Harting Electronics & Kg is a 3-row, 48-contact board Euro connector with a mating contact pitch of 0.2". It features polarization key for polarized housing and rated current of 6A, suitable for commercial applications requiring reliable connections on PCBs with a spacing of 2.54mm b/w rows A, B, and C.
SM06B-SRSS-TB(LF)(SN)
SM06B-SRSS-TB(LF)(SN) by J S T Mfg is a 6-contact board connector with 0.039" pitch, suitable for PCB mounting. Featuring tin/copper finish, it has an insulation resistance of 100M ohm and operates b/w -25 to 85°C. Ideal for applications requiring a male contact style in a right-angle mounting configuration.
52271-1669
Molex 52271-1669 is a FFC/FPC connector with 16 contacts, mating pitch of 0.039", and body width of 0.118". It features TIN over nickel termination finish, polyamide insulator, and UL94V-0 flammability rating. Ideal for board mounting applications requiring surface mount termination in commercial settings.
7-188275-8
TE Connectivity 7-188275-8 is a 2-row, 8-contact board connector with 0.05" pitch. With insulation resistance of 1Gohm and rated voltage of 100V, it's ideal for PCB applications. Featuring POLYAMIDE46 insulator material, this header has a temperature range from -40 to +105 °C.
853-87-054-30-001101
Preci-dip Sa
853-87-054-30-001101 by Preci-dip Sa is a BOARD CONNECTOR with 54 contacts, BERYLLIUM COPPER material, and TIN finish. It is ideal for surface mount applications in headers & edge type connectors, offering a terminal pitch of 1.27mm and UL Flammability Code of 94V-0.
1-640456-5
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; No. of Rows Loaded: 1;
61300611121
Wuerth Elektronik & Kg
61300611121 by Wurth Elektronik is a board connector with 6 contacts, rated for 3A signal current. Featuring gold over nickel termination finish, it has a mating contact pitch of 0.1" and insulation resistance of 1Gohm. Ideal for commercial applications, this connector operates b/w -40 to 125°C on PCBs with rectangular contact patterns.
SM04B-GHS-TB(LF)(SN)
SM04B-GHS-TB(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.049" pitch, POLYAMIDE insulator, and 500VAC dielectric voltage. Ideal for PCB applications requiring male contacts, right-angle mounting, and surface mount termination.
PAP-04V-S
PAP-04V-S by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.079" pitch, 800VAC dielectric voltage, and 3A signal current rating. Ideal for applications requiring POLARIZED HOUSING and CRIMP termination, this UL-rated connector operates b/w -25 to 85 °C temperatures.
ASP-134488-01
Samtec
Samtec ASP-134488-01 is a 10-row, 400-contact board connector with 0.05" pitch and liquid crystal polymer insulator. It features gold over nickel mating contacts, straight mounting style, and surface mount termination. Ideal for commercial applications requiring high-density connections on PCBs.
FTSH-107-01-L-DV-K-A
The Samtec FTSH-107-01-L-DV-K-A is a 2-row, 14-contact board connector with Tin-Nickel finish. Operating from -55°C to 125°C, it has a pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in electronics requiring male connectors with straight mounting style.
04T-JWPF-VSLE-S
BOARD CONNECTOR; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO; IEC Conformity: NO; Contact Material: NOT SPECIFIED; MIL Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved