Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD STACKING CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Corphita
Headers & Edge Type Connectors 503304-4242 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
503304-4242 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
Micro Commercial Components
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
1552200168
Molex
WIRE AND CABLE;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Frontier Electronics
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
VHR-2N-Y
J S T Mfg
BOARD CONNECTOR;
3220-10-0300-00-TR
Cnc Tech
3220-10-0300-00-TR by Cnc Tech is a BOARD CONNECTOR with 2 rows, 10 contacts, and BRASS material. It features Gold (Au) termination with Nickel (Ni) barrier for durability. Ideal for surface mount applications in electronics requiring high-quality male connectors.
22-01-3077
The Molex 22-01-3077 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a 700VAC dielectric voltage and -40 to 105°C operating temperature range, it offers reliable signal current of 4A. With POLYAMIDE insulation material and UL94V-0 flammability rating, this connector is ideal for commercial applications requiring durable and polarized female contacts.
1-2199230-5
TE Connectivity
TE Connectivity 1-2199230-5 is a POLYETHYLENE card edge connector with 67 contacts in a 2-row configuration. It has a mating contact pitch of 0.5", operates b/w -40 to 80°C, and features a right-angle mounting style for board applications. Ideal for PCBs requiring 0.5A signal current rating.
22-01-3037
The Molex 22-01-3037 is a board connector with 3 contacts, rated at 4A signal current. Featuring a mating contact pitch of 0.1", it has a durable design with removable contact blocks and polarization key for easy assembly. With an insulation resistance of 1Gohm and operating temperature range from -40 to 105°C, it is ideal for commercial applications requiring reliable connections.
5-146280-2
TE Connectivity 5-146280-2 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring matte tin over nickel finish, it has an insulation resistance of 5000000000 ohm and operates b/w -65 to 105°C. Ideal for use in electronics requiring a reliable male receptacle connection with solder termination.
M80-8262042
Harwin Plc
M80-8262042 by Harwin PLC is a 20-contact male plug board connector with 0.079" mating contact pitch and POLYAMIDE insulator material. It has a rated current of 3A, operates b/w -55 to 125°C, and offers high durability with 500 cycles. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
ZHR-2
ZHR-2 by J S T Mfg is a 2-contact BOARD CONNECTOR with a mating contact pitch of 0.059". Its compact body measures 0.134" in width and 0.189" in depth, meeting UL Flammability Code 94V-0 standards. Ideal for CABLE mounting, this CRIMP termination FEMALE connector is commonly used in electronic applications requiring reliable connections.
VHR-8N
VHR-8N by J S T Mfg is a 0.156" pitch BOARD CONNECTOR with 8 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. Ideal for cable mounting applications, it has a temperature range of -25 to 85°C and UL94V-0 flammability rating.
102694-3
TE Connectivity 102694-3 is a 2-row board connector with 10 contacts, rated at 3A for signal current. Featuring tin/lead termination, it has a mating contact pitch of 0.1" and operates b/w -65 to +105°C. Ideal for cable mounting applications requiring reliable female connectors with bellowed contact style.
2-640456-6
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POLARIZED; Termination Type: SOLDER; Mating Contact Finish: TIN;
54122-112-04-2000LF
AMPHENOL ICC
Amphenol Icc's 54122-112-04-2000LF is a board connector with 8 contacts, rated at 3A signal current. It features a mating contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 125 °C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
2-640456-5
TE Connectivity 2-640456-5 is a 25-contact board connector with 0.1" pitch, suitable for commercial applications. Featuring tin finish, it operates b/w -55 to 105°C and has UL94V-0 flammability rating. Ideal for PCBs, this male plug connector has a 5A signal current rating and rectangular contact pattern.
7-188275-8
TE Connectivity 7-188275-8 is a 2-row, 8-contact board connector with 0.05" pitch. With insulation resistance of 1Gohm and rated voltage of 100V, it's ideal for PCB applications. Featuring POLYAMIDE46 insulator material, this header has a temperature range from -40 to +105 °C.
70543-0001
Molex 70543-0001 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and phosphor bronze contacts. With UL certification and 3A signal rating, it offers durability of 50 cycles at temperatures ranging from -40 to 105°C.
473882001
Molex 473882001 is a PCB connector with 0.1" pitch, GOLD NICKEL finish, and GLASS FILLED LCP insulator. It has 6 contacts, rated for 0.5A signal current, and operates b/w -40 to 85°C. Ideal for commercial applications requiring durable surface mount connectors on boards with 16.764mm row spacing.
2103
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; MIL Conformity: NO; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
FTSH-105-01-F-DV-K-A-P-TR
Samtec
Samtec's FTSH-105-01-F-DV-K-A-P-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts plated with gold flash over nickel for signal currents up to 3.4A. Ideal for commercial applications requiring reliable surface mount connections at temperatures ranging from -55°C to 125°C.
5055960801
BOARD CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
90148-1204
Molex 90148-1204 is a board connector with 0.1" pitch, suitable for commercial applications. It features glass-filled polyester insulation, UL94V-0 flammability rating, and can handle up to 3A signal current. Ideal for PCBs with rectangular contact pattern and right-angle mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved