Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 5025700893 is a PCB connector with 0.043" pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for board mounting applications, featuring liquid crystal polymer insulator material and right angle mounting style. Suitable for commercial use with 8 contacts, rated at 0.5A signal current and durability of 10000 cycles.
Median Price
$2.370
Lifecycle Status
Suppliers In-Stock
62
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$1.090
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$1.550
Verical
$3.815
$2.805
$2.493
$2.266
DigiKey
$4.060
$2.934
$2.679
$2.539
Mouser Electronics
$2.940
$2.680
$2.380
Arrow
$4.154
$3.002
$2.741
$2.598
RS Americas
$4.440
$3.420
$3.020
Distrelec
$4.942
$4.644
$4.347
Element14
$5.690
$4.320
$3.760
TTI
$2.220
TTI Europe
$1.964
Future Electronics
$0.750
Sager
$2.140
Master Electronics
Newark
$2.510
Farnell
$1.720
Interstate Connecting
$1.851
Heilind Electronics
$2.103
Powell Electronics
$2.430
$2.240
IBS Electronics
$1.065
$2.094
$1.898
$2.399
TestEquity
$1.590
Digiode
$2.784
Component Electronics Inc.
$3.080
$2.310
$2.000
Nova Conductors
$3.160
TME
$3.200
$2.320
$2.080
Maritex
$3.395
$2.461
$2.200
Rutronik
$1.640
NAC Semi
$2.120
Chip Stock
Vyrian
Component Sense
Bristol Electronics
ComSIT Distribution GmbH
ComSIT USA
Contempo Components LLC
VNN
Atlantic Semiconductor
Cyclops Electronics Ltd
Goldney Electronics S.L.
Sensible Micro Corp
Netsource Technology, Inc.
Flip Electronics
Semtec, LLC
LIBRA Elektronik GmbH
SPM Sales
Classic Components Corporation
Inventory MP
Prism Electronics
Connector Distribution Corp
Right Parts Inc.
North Shore Components
PC Components Company LLC
Semi Source
Demsay Elektronik
Speed Components Ltd
ACDS - Activité Composants Distribution Service
LWI Electronics Inc
Zilex Electronics Inc.
EMSNET
Electronics Depot
Elcom Components
J2 Sourcing AB
Semicontronic
$1.460
$1.424
$1.416
Advanced Electronics
$1.645
$1.563
Corphita
$2.637
Continental Prestige Electronics
$2.890
$2.832
Argo Parts USA
Aranea Global
$3.097
$2.973
Aztec Data Supply Inc.
$10.117
Andel Nordic
$11.021
$10.580
Perfect Parts
Infinite Electronics LLP (Excess)
Kepictronics
Authorized Procurement Solutions
Abacus Technologies
GreenTree Electronics
Futuretech Components
Lucentia Tech
$0.081
Robosynatics
$2.769
$2.712
EMSNET (Excess)
Formix International (Excess)
XScomponents
Speed Components Ltd (Excess)
Modulus Dynamics
Ashlea Components Ltd (Excess)
Assy Fe
Eastek
The small contact pitch allows for more contacts to be packed into a compact space, enabling high density connections.
The appropriate body length ensures a secure and stable connection between the components.
High insulation resistance prevents leakage of current and ensures reliable performance.
The slim body width enables space-saving installation on the PCB.
The high dielectric voltage withstand capability ensures safety and reliability in high voltage applications.
Liquid crystal polymer is a high-performance material known for its excellent mechanical and electrical properties.
Solder holding posts provide a secure mounting option on the PCB, ensuring a stable connection.
The high maximum operating temperature makes this product suitable for a wide range of applications.
The low minimum operating temperature ensures the product can withstand harsh environmental conditions.
The thick plating thickness enhances durability and corrosion resistance of the connector.
Specifically designed for PCB applications, ensuring easy and reliable connections.
Suitable for signal transmission with a rated current of 0.5 A, meeting the requirements of typical electronic devices.
The black color of the insulator provides a sleek and professional appearance to the connector.
Compliance with UL standards ensures high quality and safety of the product.
With 8 contacts available, this connector allows for multiple connections within a single component.
Single connector design simplifies installation and maintenance of the product.
The high durability rating of 10000 cycles ensures long-lasting performance and reliability.
Designed for easy and secure mounting on a PCB, ensuring stability and reliability.
The specific terminal pitch allows for precise and accurate connections between components.
Rectangular contact pattern ensures compatibility with standard PCB layouts for seamless integration.
Surface mount termination simplifies the assembly process and provides a reliable connection to the PCB.
Female contacts are commonly used in electronic connectors, providing compatibility with multiple devices.
Low contact resistance ensures efficient signal transmission and minimal power loss.
Socket body style provides a secure and stable connection between components.
Right angle mounting style allows for versatile installation options and efficient use of space on the PCB.
Bellowed contact style provides flexibility and reliability in maintaining contact pressure over repeated mating cycles.
Commercial grade reliability ensures consistent performance and durability in various applications.
Headers & Edge Type Connectors 5025700893 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
5025700893 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - 5025700893 Location 04/Aug/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Eic Semiconductor
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
MBRS130LT3G
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
472192001
Molex
Molex 472192001 is a PCB connector with 0.043" mating contact pitch, 0.535" body length, and 100000000 ohm insulation resistance. It is used in applications requiring a durable, right angle mounting receptacle for commercial reliability.
51281-0594
Molex 51281-0594 FFC/FPC connector with 0.020" pitch, 5 contacts, and glass-filled LCP insulator. Ideal for board mounting in commercial applications. Operating temp -20 to 85°C, UL94V-0 rated, female contact type with surface mount termination.
2-640456-2
TE Connectivity
The TE Connectivity 2-640456-2 is a board connector with a mating contact pitch of 0.1", suitable for commercial applications. Featuring a max operating temperature of 105°C, it has 22 contacts and a rated current of 5A. With solder termination and UL94V-0 flammability rating, it offers reliable performance in various electronic systems.
B3B-XH-AM(LF)(SN)
J S T Mfg
B3B-XH-AM(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2.5mm and UL94V-0 flammability rating. Ideal for board mounting applications in electronics requiring reliable male connectors.
22-14-2064
The Molex 22-14-2064 board connector features a mating contact pitch of 0.1", insulation resistance of 500000000000 ohm, and dielectric voltage rating of 250VAC. Ideal for PCB edge locking hook mounting, this female plug connector has a total of 6 contacts and is rated for signal currents up to 2.5A in commercial applications.
350777-1
AMPHENOL ICC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Wire Size: 30 AWG; Insulator Material: POLYAMIDE; Body or Shell Style: PLUG;
5011892010
Molex 5011892010 is a 20-contact board connector with 0.039" pitch, POLYAMIDE insulator, and -40 to 105°C operating range. Ideal for cable mounting applications requiring female contacts in a straight receptacle design.
SM06B-SRSS-TB(LF)(SN)
SM06B-SRSS-TB(LF)(SN) by J S T Mfg is a 6-contact board connector with 0.039" pitch, suitable for PCB mounting. Featuring tin/copper finish, it has an insulation resistance of 100M ohm and operates b/w -25 to 85°C. Ideal for applications requiring a male contact style in a right-angle mounting configuration.
FTSH-105-01-F-DV-K-P-FR
Samtec
The Samtec FTSH-105-01-F-DV-K-P-FR is a 2-row, 10-contact male board connector with tin finish and nickel barrier. It has a terminal pitch of 1.27mm and UL flammability rating of 94V-0. Ideal for surface mount applications in electronics requiring high-density connections.
50-57-9008
The Molex 50-57-9008 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It features glass-filled polyester insulator material and UL 94V-0 flammability code. Ideal for commercial applications requiring an 8-contact female connector with crimp termination on cables.
5023520400
The Molex 5023520400 is a board connector with a mating contact pitch of 0.079 inches and a body length of 0.472 inches. It has an insulation resistance of 1,000,000,000 ohms and is commonly used in commercial applications for its durability and right angle mounting style.
S2B-XH-A-1(LF)(SN)
S2B-XH-A-1(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with BRASS contacts and TIN finish. Featuring 2 contacts with 2.5mm pitch, it is ideal for RIGHT ANGLE mounting applications in electronics requiring UL 94V-0 flammability rating.
90120-0762
Molex 90120-0762 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring bright tin finish, it offers 3A signal current rating and withstands up to 1000VAC. With a durable design lasting 30 cycles, this male connector is ideal for PCB mounting with solder termination.
22-11-2022
Molex 22-11-2022 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring polyamide insulation material, it offers 1000000000 ohm insulation resistance and operates b/w 0-75°C. With a matte tin over nickel termination finish, this male connector has a durability of 50 cycles and is ideal for commercial applications requiring a rated current of 4A.
FTSH-105-01-L-DV-K-P-FR
The Samtec FTSH-105-01-L-DV-K-P-FR is a 2-row, 10-contact male board connector with tin finish. It has a terminal pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications requiring straight mounting style.
B6B-EH-A(LF)(SN)
B6B-EH-A(LF)(SN) by J S T Mfg is a 6-contact male board connector with 0.098" mating contact pitch, 0.689" body length, and 0.15" body width. It features gold mating contact finish, solder termination type, and polyamide66 insulator material. Ideal for applications requiring a straight mounting style and rectangular contact pattern.
B2PS-VH-GU
B2PS-VH-GU by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 3.96mm and is ideal for right angle mounting on boards. This connector is suitable for applications requiring male contact gender and UL 94V-0 flammability rating.
22-23-2031
The Molex 22-23-2031 is a board connector with 3 male contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1G ohm, and body length of 0.294". It is used in commercial applications, with UL flammability rating of 94V-0 and termination via solder for reliability.
FTSH-105-01-L-DV
The Samtec FTSH-105-01-L-DV is a 2-row, 10-contact board connector with a contact pitch of 0.05". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, surface-mountable connector with a UL94V-0 flammability rating.
66506-354
Berg Electronics
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 40; Mounting Type: BOARD; Mixed Contacts: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5025780200
The Molex 5025780200 is a board connector with a mating contact pitch of 0.059 inches. It has a body length of 0.287 inch and a body width of 0.24 inch. This plug-style connector is commonly used in commercial applications for surface mount termination on boards.
502578-1200
BOARD CONNECTOR; Reliability: COMMERCIAL; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Body Depth: .339 inch; Reference Standard: UL; Insulator Color: BEIGE;
5025840670
Molex 5025840670 is a board connector with 6 contacts, 0.059" pitch, and 500VAC dielectric voltage. Ideal for commercial applications, it features a 0.524" body length, -25 to 85°C operating range, and surface mount termination for durability in various environments.
5025985193
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Mating Contact Finish: NOT SPECIFIED; No. of Rows Loaded: 1; Mounting Style: RIGHT ANGLE; JESD-609 Code: e3;
502598-4593
Molex 502598-4593 FFC/FPC connector with 45 contacts, 0.012" pitch, and 0.614" body length. Ideal for board mounting applications in commercial settings with -40 to 105°C operating temperature range. Features glass-filled liquid crystal polymer insulator material and surface mount termination for reliable performance.
502598-2593
Molex 502598-2593 FFC/FPC connector with 25 contacts, 0.012" pitch, and 0.2A signal current is ideal for board mounting applications. Features include TIN finish, GLASS FILLED LCP insulator, and -40 to 105°C operating range. Suitable for commercial use per UL standards.
5025983993
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Mating Contact Finish: NOT SPECIFIED; Mating Contact Pitch (inch): 0.012; Body Width: .045 inch; Rated Current - Signal: .2 A;
5025780800
Molex 5025780800 is a board connector with 8 contacts, mating pitch of 0.059", and insulator made of PBT. It has a plug body style, beige color, and UL reference standard. Ideal for commercial applications requiring reliable locking mounting options.
502584-0260
Molex 502584-0260 is a board connector with 2A signal current rating, 30 cycles durability, and 500VAC dielectric voltage. It features a 0.059" mating pitch and is ideal for commercial applications requiring surface mount termination on PCBs.
5025850270
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Termination Type: SURFACE MOUNT;
5025850670
Molex 5025850670 is a BOARD CONNECTOR with 6 contacts, 1.5mm pitch, and UL 94V-0 flammability rating. Ideal for surface mount applications in headers & edge type connectors, featuring female contact gender and right angle mounting style.
5025840560
Molex 5025840560 is a board connector with 5 contacts, 0.059" pitch, and 500VAC dielectric voltage. Ideal for commercial applications, it features female contacts, surface mount termination, and operates b/w -25 to 85°C temperatures.
5025840570
The Molex 5025840570 is a board connector with a mating contact pitch of 0.059 inches and a body length of 0.465 inches. It has an insulation resistance of 500MΩ and is commonly used in commercial applications for surface mount termination.
502584-0470
The Molex 502584-0470 is a board connector with a mating contact pitch of 0.059", insulation resistance of 500MΩ, and rated current of 2A. It is commonly used in commercial applications for surface mount termination on PCBs.
5025851270
The Molex 5025851270 is a board connector with a total of 12 contacts and a terminal pitch of 1.5mm. It is a right angle receptacle that can be surface mounted, making it suitable for various applications in the electronics industry.
502598-2393
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Rated Current - Signal: .2 A; Body Depth: .15 inch; Contact Pattern: RECTANGULAR; Mounting Style: RIGHT ANGLE;
5025780500
The Molex 5025780500 is a board connector with a mating contact pitch of 0.059 inches. It has a compact body size, measuring 0.465" x 0.24" x 0.339", and is made of POLYBUTYLENE TEREPHTHALATE. With 5 contacts, it is suitable for commercial applications requiring reliable locking connections.
502598-3393
FFC/FPC CONNECTOR; Reliability: COMMERCIAL; Contact Resistance: 60 mohm; Maximum Operating Temperature (Cel): 105; Mounting Style: RIGHT ANGLE; Plating Thickness (inch): 3.93u;
502584-0460
Molex 502584-0460 is a board connector with 4 contacts, 0.059" pitch, and 500VAC dielectric voltage. Ideal for commercial applications, it features surface mount termination, female contact gender, and straight receptacle body style.
502570-0831
PCB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 500VAC; No. of Connectors: ONE; Contact Style: COMPRESSION;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved