Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 1000VAC; Minimum Wire Size: 28 AWG; Polarization Key: POLARIZED HOUSING; Maximum Operating Temperature (Cel): 85;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$11.528
$11.067
Corphita
Headers & Edge Type Connectors 501646-1003 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Minimum Insulation Diameter:
Insulation Resistance:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mounting Option-1:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Total No. of Contacts:
Maximum Wire Size:
Minimum Wire Size:
501646-1003 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bharat Electronics
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Itt Semiconductor
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
53047-0510
Molex
Molex 53047-0510 is a board connector with 5 contacts, 1.25mm terminal pitch, and 0.09" terminal length. It features polarized housing, solder termination, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable rectangular PCB contact patterns.
5650473-5
TE Connectivity
TE Connectivity 5650473-5 is a 3-row BOARD EURO CONNECTOR with 96 contacts. Featuring GLASS FILLED POLYMER insulator, it has a mating contact pitch of 0.1 inch and operates b/w -55 to 105 °C. Ideal for commercial applications requiring high insulation resistance and rated current of 1.5A.
43645-0200
The Molex 43645-0200 is a board connector with a mating contact pitch of 0.312". It features an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications, this female connector has a durability of 30 cycles and uses crimp termination on cables.
DTM04-3P-E003
TE Connectivity's DTM04-3P-E003 is a 1.68"x.816"x.638" board connector with GLASS FILLED POLYAMIDE insulator, UL 94V-0 rated for 250V/7.5A signal current at -55 to 125°C. Ideal for cable mounting applications requiring polarized male contacts and strain relief option.
DF40C-60DP-0.4V(51)
Hirose Electric
DF40C-60DP-0.4V(51) by Hirose Electric is a 2-row, 60-contact board stacking connector with gold over nickel finish. It features liquid crystal polymer insulator, 100VAC dielectric voltage, and 0.3A signal current rating. Ideal for PCB applications requiring durability, reliability, and polarization key for secure connections.
17211101102
Harting Electronics & Kg
17211101102 by Harting Electronics & Kg is a board connector with 110 female contacts in a right-angle mounting style. It features a mating contact pitch of 0.079", body length of 1.965", and termination contact finish of gold over nickel. Ideal for applications requiring high-density PCB connections with precise rectangular patterns and press-fit terminations.
5-103669-1
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mixed Contacts: NO; Contact Material: BRASS;
68612214122
Wuerth Elektronik & Kg
68612214122 by Wurth Elektronik is a FFC/FPC connector with 22 contacts, 0.039" pitch, and 1A signal current rating. Ideal for board mounting applications, it features polyphenylene sulfide insulation material and tin over nickel contact finish. Operating b/w -25°C to 85°C, it offers high durability with 25 cycles and meets UL standards for reliability.
43650-0212
The Molex 43650-0212 is a board connector with 0.118" mating contact pitch, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 100u plating thickness. Ideal for applications requiring a durable male connector with 5A signal current rating, operating b/w -40 to 105°C in commercial settings.
17211102101
17211102101 by Harting Electronics & Kg is a BOARD CONNECTOR with 110 contacts, GOLD OVER NICKEL finish, and GLASS FILLED POLYETHYLENE insulator. It has a Mating Contact Pitch of 0.079", operates b/w -55 to 125 °C, and offers durability up to 250 cycles. Ideal for applications requiring high insulation resistance and reliable signal current of 1A in commercial settings.
851-43-025-10-021000
Mill-max Mfg
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
43025-1000
The Molex 43025-1000 is a board connector with 10 contacts arranged in S0P10 pattern. It has a mating contact pitch of 0.118", insulation resistance of 1Gohm, and rated current of 2.5A. Ideal for commercial applications, it features a polyamide insulator, operates b/w -40 to 105°C, and has UL94V-0 flammability rating.
7-215079-6
TE Connectivity 7-215079-6: Headers & Edge Type Connectors with 0.05" pitch, 1A signal current rating, and GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. Ideal for board mounting applications in commercial settings due to its durability and UL Flammability Code of 94V-0.
B2P-VH-FB-B(LF)(SN)
J S T Mfg
B2P-VH-FB-B(LF)(SN) by J S T Mfg is a 1-row, straight board connector with a contact pitch of 0.156 inches. It has a body length of 0.386 inch and width of 0.382 inch. This connector is commonly used in applications requiring male contacts and solder termination.
1-1473005-1
TE Connectivity 1-1473005-1 is a PCMCIA connector with 200 contacts, rated at 0.5A. It features POLYETHYLENE insulator, UL94V-0 flammability code, and operates b/w -55 to 85°C. Ideal for board mounting applications requiring a right angle socket with surface mount termination.
43645-0300
The Molex 43645-0300 is a board connector with a mating contact pitch of 0.118". It has a body length of 0.388" and insulation resistance of 1,000,000,000 ohm. This connector is commonly used in commercial applications and has a max operating temperature of 105°C.
5055960601
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
SQT-120-01-F-D
Samtec
SQT-120-01-F-D by Samtec is a 40-contact board connector with a contact pitch of 0.079". It features a matte tin finish, liquid crystal polymer insulator, and gold flash over nickel mating contacts. Ideal for applications requiring high durability and reliability in commercial settings.
1410186-1
TE Connectivity 1410186-1 is a BOARD CONNECTOR with 72 contacts, 9 rows, and 0.071" contact pitch. It has LIQUID CRYSTAL POLYMER insulator for -55 to 105 °C operation. Ideal for applications requiring FEMALE connectors with SOLDER termination in a STRAIGHT mounting style.
22-03-2021
Molex 22-03-2021 is a board connector with mating contact pitch of 0.1", insulation resistance of 50000000000 ohm, and dielectric voltage of 1500VAC. It has a male contact gender, rated current of 4A for signal transmission, and is suitable for commercial applications requiring durable connections on PCBs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved