Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Vyrian
Nova Conductors
Aztec Data Supply Inc.
$5.900
Andel Nordic
$7.495
$7.195
AZTECH Wire
$18.980
Authorized Procurement Solutions
Corphita
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
Perfect Parts
Assembly Products 5011935000 attributes and parameters. Explore more Assembly Products devices from Molex
Connector Accessory Type:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Gulf Semiconductor
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Multicomp Pro
EU2B-YS303C
Idec
ROTARY SWITCH;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
0-0281934-2
TE Connectivity 0-0281934-2 SEALING ITEM has a temp range of -40 to 130°C, fits up to 0 AWG wire, and allows for cable entry of 2.4". Ideal for sealing applications in various industries.
SPHD-002T-P0.5
J S T Mfg
SPHD-002T-P0.5 by J S T Mfg is a CRIMP connector with bellowed contact style, suitable for 28-24 AWG wires. It has a rated current of 3A and can handle up to 100V AC/DC. Ideal for applications requiring reliable female connectors with low contact resistance in temperatures ranging from -25 to 85°C.
M23053/16-004-0
3m Electronic Products Division
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
WM-2SA
CONNECTOR ACCESSORY; Design: POWER AND SIGNAL; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Material: POLYBUTYLENE TEREPHTHALATE; Wire Gauge (AWG): 0;
WM-3S
The TE Connectivity WM-3S is an assembly product designed for DTM SERIES applications. It features a temperature range of -55 to 125°C, suitable for power and signal designs. With a max wire size of 0 AWG and made from polybutylene terephthalate, it is ideal for various electrical connections.
39-00-0060
Molex
Molex 39-00-0060 CONTACT features CRIMP terminal type, 0.051" min cable entry, and PHOSPHOR BRONZE material. Ideal for 5557, 30067, 42474, 44516 SERIES HOUSING applications with FEMALE contact gender and SQUARE PIN-SOCKET design.
13663717
Aptiv
FGG.1B.555.ZZC
Lemo Usa
CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: CONTACT; Contact Gender: MALE; IEC Conformity: NO; Contact Style: ROUND PIN-SOCKET;
3036916
Phoenix Contact
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Approvals (V): UL; DIN Conformity: NO; Material: COPPER; IEC Conformity: NO;
770854-3
TE Connectivity's 770854-3 contact features crimp terminal type, stamped contact design, and copper alloy material. With a wire gauge of 16 AWG and rated current of 17 A, it is ideal for applications requiring female gender contacts with round pin-socket style in straight mounting.
3-2198617-7
TE Connectivity 3-2198617-7 backshell has 4 shell sizes with shielding. It supports up to 0 AWG wire size, made of ABS material. Mounting options include #4-40 screw for various applications in Assembly Products category.
2-2154857-1
TE Connectivity's 2-2154857-1 is a POWER assembly product with a rated voltage of 250V and max operating temperature of 105°C. It can handle wire sizes up to 0 AWG and has a rated current of 4A. This versatile copper alloy component is commonly used in applications requiring high power transmission.
1731110082
Molex 1731110082 is a zinc alloy BACKSHELL for D-SUB CONNECTOR with 0.118" to 0.335" cable entry. It can operate b/w -35°C to 100°C, mounted using 4-40 UNC screws. Ideal for applications requiring secure cable connections in various environments.
HDR-E26LPHP+
Honda Tsushin Kogyo
CONNECTOR ACCESSORY; Mounting Option-1: M2; MIL Conformity: NO; IEC Conformity: NO; Material: PBT RESIN; DIN Conformity: NO;
194200010
Molex 194200010 is a female contact with crimp terminal type, suitable for 19418 Series receptacle housing. Features include copper alloy material, 0.295" terminal length, and wire sizes ranging from 22 AWG to 18 AWG. Ideal for straight mounting applications in assembly products.
13697415
Aptiv 13697415 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has FEMALE contact gender with 0.0748" to 0.0945" cable entry. Ideal for automotive wiring harness assembly due to its precise crimping and compatibility with specified cable types.
1SET111009R0000
TE Connectivity's 1SET111009R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 16 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C and STRAIGHT mounting style, it ensures reliable connections in various setups.
W3P
W3P by TE Connectivity is an Assembly Product for DT SERIES. It features a Max Operating Temperature of 125°C and Min Operating Temperature of -55°C. With a Max Wire Size of 0 AWG, it is designed for POWER AND SIGNAL applications using POLYBUTYLENE TEREPHTHALATE material.
AT06-4S-CAP
Amphenol
DF3-2428SCFC
Hirose Electric
DF3-2428SCFC by Hirose Electric is a female contact with bellowed design, made of phosphor bronze. It has a finish thickness of 7.9 and terminal length of 0.108". Ideal for straight mounting applications in assembly products.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5011937000
Molex 5011937000 is a PICO-CLASP CONNECTOR with CRIMP terminals. It has a rated current of 1.5A and can handle up to 50V AC/DC voltage. The contact material is PHOSPHOR BRONZE, suitable for wire sizes ranging from 32-28 AWG in straight mounting applications.
5011933000
Molex 5011933000 is a crimp terminal contact designed for signal applications. It supports wire sizes from 32 AWG to 28 AWG and is made of phosphor bronze. Its female gender makes it suitable for various assembly products in the electronics industry.
5011938000
CONNECTOR ACCESSORY; Rated Current: 1.5 A; Rated AC Voltage: 50 V; Minimum Wire Size: 32 AWG; Finish Thickness: 15; Maximum Wire Size: 28 AWG;
501193-2000
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Terminal Length: .06 inch; Terminal Type: CRIMP; Contact Resistance: 20 mohm; DIN Conformity: NO;
501193-0000
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Contact Style: BELLOWED CONTACT; Minimum Wire Size: 32 AWG; Maximum Wire Size: 28 AWG;
501193-0100
CONNECTOR ACCESSORY; Maximum Cable Entry: .0314 inch; Maximum Wire Size: 28 AWG; Assembly Item Name: CONTACT; IEC Conformity: NO; Usage: 501189;
501197-1
CONNECTOR ACCESSORY; Manufacturer Series: 501197;
501197-3
501193-3100
CONNECTOR ACCESSORY; Minimum Cable Entry: .0157 inch; Terminal Length: .067 inch; Additional Features: UNDERPLATING THICKNESS (39), TERMINATION: TIN (35) OVER NICKEL (39); DIN Conformity: NO; MIL Conformity: NO;
5011935100
5011936000
5011939000
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved