Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 350VAC; No. of Connectors: ONE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Corphita
Headers & Edge Type Connectors 501190-4019 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
501190-4019 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
EU2B-YS303C
Idec
ROTARY SWITCH;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
CRG0805F10K
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Multicomp Pro
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
89110-0101
3m Electronic Products Division
89110-0101 by 3M Electronic Products Division is a board connector with a mating contact pitch of 0.1", insulation resistance of 1G ohm, and dielectric voltage of 1400VAC. It has a body length of 0.68", suitable for applications requiring a reliable socket connector with IDC termination and gold-nickel finish for signal currents up to 1.25A in commercial settings.
502352-0200
Molex
The Molex 502352-0200 is a board connector with 2 contacts, featuring a mating contact pitch of 0.079" and insulation resistance of 1 Gohm. Ideal for commercial applications, it has a max operating temperature of 105°C and termination type of surface mount.
M50-3600542
Harwin Plc
The Harwin PLC M50-3600542 is a 10-contact board connector with 0.05" mating contact pitch, suitable for PCB applications. Featuring a 1A signal current rating, it has a durable design with 300 cycles lifespan and operates b/w -40°C to 105°C temperature range. The connector has tin finish contacts and polyethylene insulation material, meeting UL standards for reliability.
VHR-2N-R
J S T Mfg
BOARD CONNECTOR;
2201778-1
TE Connectivity 2201778-1 is a PCB connector with 0.04" mating contact pitch, 0.549" body length, and 100000000 ohm insulation resistance. It is used in applications requiring a female compression contact style, right angle mounting, and surface mount termination for commercial reliability.
DF40C-100DS-0.4V
Hirose Electric
DF40C-100DS-0.4V by Hirose Electric is a 2-row stacking connector with 100 contacts, gold termination, and liquid crystal polymer insulator. It has a mating contact pitch of 0.016", dielectric voltage of 100VAC, and operates b/w -35 to 85°C. Ideal for board applications requiring durability, reliability, and signal current rating of 0.3A.
746-012-520-606
Edac
Edac 746-012-520-606 is a 2-row card edge connector with 12 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage rating of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
SHR-08V-S-B
SHR-08V-S-B by J S T Mfg is a BOARD CONNECTOR with 8 contacts, POLARIZED HOUSING, and 1A signal rating. It features a mating contact pitch of 0.039", insulation resistance of 100M ohm, and operates b/w -25 to 85°C. Ideal for cable mounting applications requiring a reliable FEMALE connector with CRIMP termination.
B2B-PH-SM4-TB(LF)(SN)
B2B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, POLYAMIDE6T insulator, and -25 to 85°C operating range. It has 2 contacts for surface mount applications on PCBs.
22-01-3087
The Molex 22-01-3087 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a dielectric voltage of 700VAC and insulation resistance of 1Gohm, it operates b/w -40 to 105°C. With a removable contact block design, it has 8 contacts and is UL94V-0 rated for applications requiring durability and reliability in commercial settings.
M20-9990206
M20-9990206 by Harwin PLC is a board connector with 0.1" mating contact pitch, 1000000000000 ohm insulation resistance, and 750VAC dielectric voltage. It is ideal for applications requiring a durable, high-temperature resistant male receptacle connector with solder termination and 3A signal current rating.
53398-0571
Molex 53398-0571 is a board connector with 0.049" pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for commercial applications, it features a male blade pin-skt contact style and surface mount termination on a straight receptacle body for durability in PCB mounting.
B2B-PH-K-S
B2B-PH-K-S by J S T Mfg is a BOARD CONNECTOR with BRASS contacts, 94V-0 UL rating, and TIN OVER COPPER finish. With 2 contacts on 2mm pitch, it's ideal for solder termination in straight mounting applications.
SHF-105-01-L-D-SM-TR
Samtec
SHF-105-01-L-D-SM-TR by Samtec is a 10-contact, dual-row board connector with TIN over nickel finish. It features a terminal pitch of 1.27mm and surface mount termination for male contacts. Ideal for applications requiring straight mounting on boards in headers & edge type connectors category.
1888247-1
TE Connectivity 1888247-1 is a 2-row board connector with liquid crystal polymer insulator. Featuring 0.031" mating contact pitch, it has a body size of 0.433"x.213"x.354". Ideal for applications requiring right angle mounting and surface mount termination, rated at 0.5A signal current.
1-2129458-1
TE Connectivity 1-2129458-1 is a PCB connector with 5 contacts, rated at 25V and 12.5A signal current. Made of polyethylene, it operates b/w -40 to 85°C. Ideal for board mounting applications requiring a right angle jack with solder termination.
746-010-520-606
Edac 746-010-520-606 is a 2-row card edge connector with 10 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
TMM-106-01-L-S
The Samtec TMM-106-01-L-S is a board connector with 6 contacts, featuring a mating contact pitch of 0.079", matte tin termination finish, and phosphor bronze contact material. It has a max operating temperature of 125°C and min of -55°C, making it suitable for commercial applications requiring reliable signal transmission on PCBs with rectangular contact patterns.
PHR-2
PHR-2 by J S T Mfg is a 2-contact BOARD CONNECTOR with 0.079" pitch, 800VAC voltage withstand, and 1000000000 ohm insulation resistance. It features POLYAMIDE66 insulator for -25 to 85 °C operation. Ideal for CABLE mounting in applications requiring FEMALE contact gender and CRIMP termination.
BM03B-SRSS-TB(LF)(SN)
BM03B-SRSS-TB(LF)(SN) by J S T Mfg is a 3-contact BOARD CONNECTOR with 0.039" pitch, suitable for -25 to 85°C temp range. Featuring POLYAMIDE insulator, COPPER ALLOY contacts, and 100000000 ohm insulation resistance, it's ideal for PCB applications requiring 1A signal current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved