Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE;
Median Price
$12.463
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Master Electronics
1+ parts
100+ parts
-
1k+ parts
$9.910
10k+ parts
$9.720
Newark
$12.540
$11.850
Chip1Stop
$10.200
Nova Conductors
$9.885
Digiode
$9.956
TestEquity
$10.600
Vyrian
VNN
IBS Electronics
$8.916
$6.900
Aztec Data Supply Inc.
$6.039
Andel Nordic
$6.200
$5.952
AZTECH Wire
$6.552
Semicontronic
$8.670
$8.453
$8.410
Corphita
$9.432
Aranea Global
$9.687
$9.299
Continental Prestige Electronics
Argo Parts USA
Headers & Edge Type Connectors 46556-7145 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
46556-7145 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Design/Specification - Mult Devs Drawing Correction 21/Jul/2022
PCN Assembly/Origin - Multiple Devices Location Change 05/Jun/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Formosa Microsemi
Itt Semiconductor
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
1-2199119-5
TE Connectivity
TE Connectivity 1-2199119-5 is a card edge connector with 67 contacts, rated at 0.5A. It has a mating contact pitch of 0.019", operates b/w -40 to 80°C, and features a polarized design for secure connections. Ideal for board mounting applications requiring high reliability and signal integrity.
10151114-001TLF
Amphenol Communications Solutions
Amphenol's 10151114-001TLF card edge connector features a mating contact pitch of 0.02", UL flammability code of 94V-0, and total of 314 contacts. Ideal for board mounting with solder holding posts, this female connector has a durability of 50 cycles and is suitable for applications requiring a rated current signal of 1.1A.
803-43-038-10-003000
Mill-max Mfg
803-43-038-10-003000 by Mill-max Mfg is a 2-row, 38-contact board connector with gold finish. Featuring a terminal pitch of 2.54mm, it is solder termination and female gendered for socket applications on boards.
61300211121
Wuerth Elektronik & Kg
61300211121 by Wuerth Elektronik & Kg is a board connector with a mating contact pitch of 0.1", insulation resistance of 1Gohm, and dielectric voltage of 500VAC. It is used in applications requiring a rated current of 3A, operating temperatures from -40 to 125°C, and UL94V-0 flammability compliance.
DM3AT-SF-PEJM5(11)
Hirose Electric
DM3AT-SF-PEJM5(11) by Hirose Electric is a PCB connector with 0.043" mating contact pitch, 1000000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for commercial applications, it features a liquid crystal polymer insulator, copper alloy contacts with gold finish, and can withstand temperatures from -25 to 85 °C.
78800-0001
Molex
Molex 78800-0001 is a card edge connector with 0.1" pitch, liquid crystal polymer insulator, and matte tin over nickel finish. It has 6 contacts, rated for 0.5A signal current, and operates b/w -30 to 85°C. Ideal for board mounting applications requiring high insulation resistance and reliable signal transmission.
BM06B-GHS-TBT(LF)(SN)(N)
J S T Mfg
BM06B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.049" pitch, POLYAMIDE9T insulator, and 500VAC dielectric voltage. It operates b/w -25 to 85 °C and has a UL94V-0 flammability rating. Ideal for surface mount applications requiring male connectors with 1A signal current capacity.
GHR-05V-S
GHR-05V-S by J S T Mfg is a 5-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure electrical connections in compact spaces.
02021602201
Harting Electronics & Kg
02021602201 by Harting Electronics & Kg is a 5-row, 160-contact board Euro connector with gold over nickel termination. It features a mating contact pitch of 0.1", insulation resistance of 1TΩ, and withstands up to 1000VAC. Ideal for commercial applications requiring durable connectors with high reliability in temperatures ranging from -65°C to 125°C.
M20-9990345
Harwin Plc
The Harwin PLC M20-9990345 is a board connector with 3A signal current rating, gold-plated contacts, and 0.1" pitch. Ideal for commercial applications, it offers high durability with 300 cycles and operates b/w -40°C to 105°C temperature range.
BM02B-GHS-TBT(LF)(SN)(N)
BM02B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a 1-row, surface mount board connector with tin termination contact finish. It has 2 contacts and a terminal pitch of 1.25mm. This connector is commonly used in headers & edge type connectors for various applications.
851-43-025-10-002000
851-43-025-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, TIN finish. It has a terminal pitch of 1.27mm and uses SOLDER termination. Ideal for applications requiring FEMALE SOCKET connectors in STRAIGHT mounting style.
TSW-104-07-G-S
Samtec
Samtec TSW-104-07-G-S is a 4-contact board connector with gold over nickel finish. Featuring a mating contact pitch of 0.1", it has a body length of 0.4" and width of 0.098". Ideal for commercial applications, this male connector operates b/w -55°C to 125°C, meeting UL standards.
640250-5
TE Connectivity 640250-5 is a board connector with 0.156" mating contact pitch, 100000000 ohm insulation resistance, and -55 to 105 °C operating temperature range. It has 5 contacts for cable mounting applications, featuring female crimp terminals and glass-filled polyamide insulator material.
B4B-PH-K-S-GW
B4B-PH-K-S-GW by J S T Mfg is a BOARD CONNECTOR with 0.079" mating contact pitch, 2A signal current rating, and 800VAC dielectric voltage. Ideal for applications requiring a male SQ PIN-SKT contact style, such as PCB connections in electronics with operating temperatures ranging from -25 to 85 °C.
2-5767004-2
Tyco Electronics Amp
BOARD STACKING CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: 5767004; Mounting Style: STRAIGHT; Total No. of Contacts: 38;
DF40C-60DP-0.4V(51)
DF40C-60DP-0.4V(51) by Hirose Electric is a 2-row, 60-contact board stacking connector with gold over nickel finish. It features liquid crystal polymer insulator, 100VAC dielectric voltage, and 0.3A signal current rating. Ideal for PCB applications requiring durability, reliability, and polarization key for secure connections.
M50-3500542
The Harwin PLC M50-3500542 is a 10-contact male board connector with 0.05" mating contact pitch and 1A signal current rating. Featuring a durable design for 300 cycles, it is ideal for commercial applications requiring a reliable connection in temperatures ranging from -40 to 105°C.
(D)B3B-EH-A(LF)(SN)(P)
(D)B3B-EH-A(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 800VAC voltage withstand, and 3A signal current rating. Ideal for PCB applications requiring POLARIZED KEY, WHITE insulator color, and STRAIGHT mounting style.
2-1761603-3
TE Connectivity 2-1761603-3 is a dual-row board connector with 10 contacts, rated at 1A. It features a contact pitch of 0.1", insulation resistance of 5G ohm, and operates b/w -65 to 105°C. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
46557-3145
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE;
46556-1745
46556-1145
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE; Mounting Style: STRAIGHT;
46557-1145
46556-3145
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE; Contact Material: COPPER ALLOY;
46556-4145
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE; Insulator Color: BLACK;
46556-3745
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE; Board Mounting Option: PEG;
46556-1645
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE; Maximum Insertion Force (N): .5004;
46556-3345
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE; Plating Thickness (inch): 30u;
46556-6145
46556-6245
46556-7345
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE; Insulation Resistance: 25000000000 ohm;
46556-7445
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE; Mounting Type: BOARD;
46556-7545
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.05;
46556-7645
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE; Total No. of Contacts: 100;
46556-7745
46556-4245
46556-7245
46556-7347
46556-1545
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; No. of Connectors: ONE; Contact Style: BELLOWED TYPE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved