Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; No. of Connectors: ONE; Contact Material: NOT SPECIFIED; Total No. of Contacts: 4;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Corphita
Power Connectors 45714-3001 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
45714-3001 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
SS14
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
Tak Cheong Electronics Holdings
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
87427-0802
Molex
The Molex 87427-0802 is a rectangular power connector with a body width of 0.433 inch and a body depth of 0.764 inch. It has an insulation resistance of 1000000000 ohm and can withstand a dielectric voltage of 1500VAC. This connector is commonly used in board mounting applications for power connections.
1723104105
Molex 1723104105 power connector features liquid crystal polymer insulator, 5 contacts, and UL 94V-0 flammability rating. With dimensions of 0.818" x 0.352" x 0.614", it is ideal for board mounting applications in a temperature range from -40°C to 105°C.
1716920106
Molex 1716920106 is a rectangular power connector with 6 contacts, made of POLYBUTYLENE TEREPHTHALATE. It has a body size of 0.699" x 0.561" x 0.981", UL94V-0 rated, and operates b/w -40°C to 120°C. Ideal for cable mounting applications requiring female SQ PIN-SKT contacts.
1-480705-0
TE Connectivity
TE Connectivity's 1-480705-0 Power Connector features POLYAMIDE insulator, 6 contacts, and 105°C max operating temp. Ideal for commercial applications, this male connector with crimp termination is designed for panel mounting with a straight body style.
43650-0216
The Molex 43650-0216 Power Connector features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings with a rated current of 8.5A and operating temperatures ranging from -40 to +105°C.
10-84-5040
The Molex 10-84-5040 is a rectangular power connector with 4 contacts, tin finish, and 138u plating thickness. It has an insulation resistance of 1Gohm, withstands up to 500VAC, and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
643424-1
TE Connectivity's 643424-1 Power Connector features POLYAMIDE insulator, rated at 12A with 6 contacts. Suitable for board mounting with a temperature range of -40 to 105°C. Ideal for commercial applications requiring durable and reliable power connections.
93445-3102
The Molex 93445-3102 is a rectangular power connector with GLASS FILLED POLYAMIDE insulator. It has 4 contacts, rated for 13A signal current, and operates b/w -55 to 125°C. Ideal for cable mounting applications requiring reliable female crimp termination with round pin-socket contact style.
43650-0300
Molex 43650-0300 is a rectangular power connector with 3 contacts, featuring a mating contact pitch of 0.118" and body width of 0.172". Ideal for board mounting applications, it has a termination contact finish of TIN and insulator material of glass filled liquid crystal polymer.
43045-1200
The Molex 43045-1200 is a rectangular power connector with 12 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage rating of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability, polarization key, and bright tin finish contacts.
120953-2
TE Connectivity's 120953-2 is a RECTANGULAR POWER CONNECTOR with 5 contacts, rated at 16A and 250V. Featuring PRESS FIT termination, it has a body size of 0.61" x 0.392" x 0.478". Ideal for board mounting applications in power systems with operating temperatures from -55 to 125°C.
43045-0218
Molex 43045-0218 is a rectangular power connector with insulation resistance of 1Gohm, dielectric voltage of 1000VAC, and operating temp range from -40 to +105°C. Ideal for board mounting applications in commercial settings due to its durable design and bright tin finish contacts.
428192213
428192213 by Molex is a power connector with dimensions of 0.937" x 0.555" x 0.827". It has an insulation resistance of 1GΩ and can withstand a voltage of 2200VAC. This male connector, made of copper alloy, is suitable for board mounting and has a rated current of 50A.
992G1
Anderson Power Products
992G1 by Anderson Power Products is a RECTANGULAR POWER CONNECTOR with 2 contacts, HERMAPHRODITIC gender, and UL 94V-0 flammability rating. It features an empty shell for customization and cable mounting type. Ideal for power applications requiring reliable and secure connections.
19-09-2128
Molex 19-09-2128 is a rectangular power connector with 12 contacts arranged in 3 rows. Made of POLYAMIDE, it operates b/w -40 to 105°C. Suitable for commercial use, this plug-style connector is panel-mounted and features crimp termination, ideal for various power applications.
39-01-2025
The Molex 39-01-2025 is a rectangular power connector with insulation resistance of 1000000000 ohm and dielectric voltage of 1500VAC. It is used in commercial applications, featuring a body length of 0.213", operating temperature range from -40 to 105 °C, and termination type as crimp.
39-01-2101
Molex 39-01-2101 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It has a mating contact pitch of 0.165", operates b/w -40 to 105°C, and supports wire sizes from 28 to 16 AWG. Ideal for cable and panel mounting applications requiring durability over 30 cycles.
91999-1249
The Molex 91999-1249 is a rectangular power connector with insulator material POLYAMIDE. It has 3 contacts, male gender, and blade pin-skt contact style. Suitable for board mounting with solder termination, it operates b/w -20 to 120°C and offers high insulation resistance of 10^7 ohm.
B02P-VL
J S T Mfg
B02P-VL by J S T Mfg is a RECTANGULAR POWER CONNECTOR with 2 contacts, made of COPPER ALLOY. It features POLYAMIDE66 insulator material and Tin (Sn) termination contact finish. Ideal for board mounting applications requiring reliable male connectors with UL94V-0 flammability rating.
43020-0401
The Molex 43020-0401 is a rectangular power connector with 4 contacts, made of nylon insulator material. It has a temperature range from -40 to 105°C and UL flammability rating of 94V-0. Ideal for commercial applications, it features crimp termination and straight mounting with locking latch option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved