Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: PHOSPHOR BRONZE; Termination Contact Finish: Bright Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
Median Price
$10.598
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
Andel Nordic
$5.094
$4.890
Corphita
Power Connectors 43879-6038 attributes and parameters. Explore more Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
JESD-609 Code:
43879-6038 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Sangdest Microelectronics (Nanjing)
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
43650-0325
Molex
The Molex 43650-0325 is a rectangular power connector with 3 contacts, male gender, and surface mount termination. It features insulation resistance of 1Gohm, operating temperature range from -40 to 105°C, and durability of 30 cycles. Ideal for commercial applications requiring reliable power connections on boards.
IPD1-02-D-K-M
Samtec
Samtec's IPD1-02-D-K-M is a rectangular power connector with 4 contacts, 0.505" body depth, and POLYAMIDE66 insulator. Ideal for cable mounting applications, featuring crimp termination and female SQ PIN-SKT contact style.
770017-1
TE Connectivity
TE Connectivity's 770017-1 is a Power Connector with Mating Contact Pitch of 0.25", Insulation Resistance of 100M ohm, and Operating Temperature range from -55 to 120°C. Ideal for cable mounting applications, it features a durable glass-filled nylon shell and crimp termination for reliable performance in commercial settings.
IPBD-02-D-K
Samtec's IPBD-02-D-K is a rectangular power connector with 4 contacts, made of POLYAMIDE. Measuring 0.37" x 0.478" x 0.773", it has UL 94V-2 flammability rating and female SQ PIN-SKT contact style. Ideal for cable mounting applications requiring reliable wire termination.
42820-5223
Molex 42820-5223 is a rectangular power connector with 5 contacts, featuring insulation resistance of 1Gohm and dielectric voltage of 2200VAC. Ideal for board mounting applications, it has a durable design with matte tin finish and glass-filled nylon insulator material.
1716920206
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
44441-2004
The Molex 44441-2004 is a rectangular power connector with a mating contact pitch of 0.295 inches. It has a body length of 1.213 inches and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in commercial applications requiring a rated current of 18A and features a polarized housing for easy installation.
1648156-1
TE Connectivity's 1648156-1 is a RECTANGULAR POWER CONNECTOR with 40 contacts, rated at 750V and 125A. It operates in temperatures from -40 to 105°C, suitable for power applications requiring high current and voltage levels. The connector features UL94V-0 flammability rating, crimp termination, and panel mounting for secure installation.
39-30-1039
Molex 39-30-1039 is a rectangular power connector with 3 contacts, rated at 9A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.
2002411122
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1-640517-0
TE Connectivity 1-640517-0 is a RECTANGULAR POWER CONNECTOR with 2 contacts, rated at 250V and 9A. Made of POLYAMIDE66, it operates b/w -55 to 85 °C. Ideal for power applications requiring CRIMP termination in a PANEL mount setup.
643414-1
TE Connectivity 643414-1 is a Power Connector with 0.8"x.3"x.3" dimensions, POLYAMIDE insulator, and Tin termination finish. Rated for 12A current, it's used in board mounting applications for power connections at -40 to 105°C temperatures.
43640-0401
The Molex 43640-0401 is a rectangular power connector with 4 contacts, rated for 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for panel mounting applications requiring durable connections in commercial settings.
39-01-2105
The Molex 39-01-2105 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, has a dielectric strength of 1500VAC, and features crimp termination for female contacts. Ideal for commercial applications requiring reliable power connections in tight spaces.
43025-1208
The Molex 43025-1208 is a rectangular power connector with 12 contacts, POLYAMIDE insulator, and 1000VAC dielectric voltage. It is used in cable applications, featuring female contacts and hybrid contact style for durability up to 30 cycles. This commercial-grade connector operates b/w -40°C to 105°C, meeting CSA, TUV, and UL standards.
1729520601
Molex 1729520601 is a RECTANGULAR POWER CONNECTOR with 6 contacts, 0.4" width, and 0.551" depth. Made of POLYAMIDE, it operates b/w -40 to 105°C. Ideal for cable mounting applications due to its FEMALE crimp termination and RECEPTACLE body style.
15-06-0045
Molex 15-06-0045 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for cable and panel mounting in commercial applications requiring durable crimp termination.
350720-4
TE Connectivity's 350720-4 is a rectangular power connector with 9 contacts, POLYAMIDE insulator, and UL94V-0 flammability rating. It operates b/w -55 to 125°C, suitable for commercial applications requiring durable crimp terminations in cable mounting setups.
19-09-2158
Molex 19-09-2158 is a rectangular power connector with 15 contacts, rated at 12A signal current. It features a mating contact pitch of 0.264", dielectric voltage withstand of 5000VAC, and operating temperatures from -40 to 105°C. Ideal for commercial applications requiring reliable power connections in panel-mounted setups.
350786-1
TE Connectivity's 350786-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator, rated for 12A current. Featuring tin termination finish, it offers high insulation resistance of 100M ohm. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved