Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 43650-1013 header connector features a body length of 1.325", insulation resistance of 1000000000 ohm, and termination contact finish of TIN OVER NICKEL. Ideal for board mounting with solder holding posts, this connector is suitable for commercial applications requiring a durable and reliable connection solution.
Median Price
$3.240
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Arrow
1+ parts
$1.197
100+ parts
$1.141
1k+ parts
-
10k+ parts
DigiKey
$5.480
$3.839
Element14
$6.960
$5.040
Newark
$3.150
Master Electronics
$4.930
$4.170
Chip1Stop
$3.120
$1.930
Verical
$3.380
$2.690
Farnell
$2.430
Powell Electronics
$2.590
TTI
Digiode
$0.568
TestEquity
$3.440
Bristol Electronics
$4.141
$1.946
$1.780
TME
$2.900
$2.300
IBS Electronics
$3.263
$3.201
$2.556
Vyrian
Semi Source
VNN
Dan-Mar Components
Nova Conductors
Corphita
$0.538
Andel Nordic
$2.135
$2.049
Continental Prestige Electronics
$3.210
$2.500
Aztec Data Supply Inc.
$6.640
Argo Parts USA
Perfect Parts
Assy Fe
Kepictronics
Aranea Global
The longer body length provides enough space for accommodating multiple contacts, making it suitable for applications requiring a higher number of connections.
High insulation resistance ensures minimal signal loss and reduced risk of electrical shorts, making it ideal for reliable and stable connections.
The TIN over NICKEL finish offers excellent corrosion resistance, ensuring long-term durability and reliable performance.
With a high maximum operating temperature, this connector is suitable for use in a wide range of environments and applications without risk of overheating.
The UL 94V-0 flammability rating indicates that the connector is flame-retardant, adding an extra layer of safety to your application.
Having 10 contacts allows for multiple connections within a single connector, making it suitable for more complex circuit requirements.
The male contact gender ensures compatibility with female connectors, providing a secure and reliable connection in various applications.
The right angle mounting style offers flexibility in installation and can save space, making it ideal for applications with limited room for connectors.
Headers & Edge Type Connectors 43650-1013 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
43650-1013 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Cancel Supplier Change 28/Mar/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1552200168
Molex
WIRE AND CABLE;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
90151-2114
The Molex 90151-2114 is a board connector with 14 contacts, rated at 3A signal current. It features a mating contact pitch of 0.1", insulation resistance of 1Gohm, and operates in temperatures ranging from -55 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs.
22-01-3057
Molex 22-01-3057 is a board connector with 0.1" pitch, suitable for commercial applications. Features include 5 contacts, 4A signal current rating, and -40 to 105°C operating temperature range. Ideal for cable mounting with crimp termination, this female connector offers high durability and polarization key for secure connections.
SM04B-SRSS-TB(LF)(SN)(P)
J S T Mfg
SM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a 2-row BOARD CONNECTOR with 0.039" pitch, 1A signal current, and 100M ohm insulation resistance. Ideal for board mounting applications requiring a male contact gender, POLYAMIDE insulator material, and operating temperatures from -25 to 85°C.
10124017-1022121LF
Amphenol Communications Solutions
Amphenol's 10124017-1022121LF is a board stacking connector with 21 contacts, gold flash termination finish, and liquid crystal polymer insulator. It has a mating contact pitch of 0.039", dielectric voltage withstand of 707VAC, and rated signal current of 1A. Ideal for applications requiring durable male connectors with staggered PCB mounting pattern.
7-215083-6
TE Connectivity 7-215083-6 is a dual-row board connector with 0.1" pitch, rated for 100V and 1.5A signal current. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, suitable for commercial applications in cable mounting with 28 AWG wires.
51103-0400
The Molex 51103-0400 is a board connector with 4 contacts, 0.098" pitch, and POLYBUTYLENE TEREPHTHALATE insulator. It operates b/w -40 to 105 °C, has a dielectric voltage of 1400VAC, and is UL94V-0 rated. Ideal for commercial applications requiring durable crimp termination in cable mounting setups.
7-188275-4
TE Connectivity 7-188275-4 is a FFC/FPC connector with 0.05" contact pitch, rated for 1.5A signal current at 100V. With POLYAMIDE46 insulator and UL94V-0 flammability rating, it's ideal for board mounting applications requiring high reliability in commercial settings.
1939115-1
TE Connectivity 1939115-1 is a PCB connector with 9 contacts, rated at 0.5A. It features liquid crystal polymer insulator, right angle mounting style, and surface mount termination type. Ideal for commercial applications requiring a male contact gender and rectangular PCB contact pattern.
XHP-4-BK
XHP-4-BK by J S T Mfg is a 4-contact BOARD CONNECTOR with UL 94V-0 flammability rating. It features FEMALE contacts for CABLE mounting and CRIMP termination. Ideal for applications requiring secure and reliable electrical connections in various electronic devices.
FTSH-110-01-L-DV-K-A-P
Samtec
Samtec's FTSH-110-01-L-DV-K-A-P is a 2-row, 20-contact board connector with a contact pitch of 1.27mm. It features gold mating contacts over nickel, suitable for commercial applications with an operating temperature range from -55 to 125°C. The connector has a straight mounting style and uses liquid crystal polymer insulator material.
5103309-1
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 10; Mixed Contacts: NO; UL Flammability Code: 94V-0;
B2B-ZR-SM4-TFT(LF)(SN)
B2B-ZR-SM4-TFT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and TIN finish. It has a terminal pitch of 1.5mm and is used for surface mount applications in headers & edge type connectors.
640456-6
TE Connectivity 640456-6 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring TIN finish, it has 6 contacts and operates b/w -55 to 105°C. With a rectangular contact pattern, it offers a rated current of 5A and solder termination for male connectors.
B5B-XH-A(LF)(SN)
B5B-XH-A(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.098" pitch, suitable for -25 to 85°C temp range. Features include 1000000000 ohm insulation resistance, tin over copper finish, and UL94V-0 flammability rating. Ideal for applications requiring reliable signal transmission in electronic devices.
DF11-16DS-2C(20)
Hirose Electric
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
S2B-PH-SM4-TB
S2B-PH-SM4-TB by J S T Mfg is a BOARD CONNECTOR with 2 contacts, COPPER ALLOY material, and TIN finish. It has a terminal pitch of 2mm for SURFACE MOUNT applications in headers & edge type connectors. The connector is UL 94V-0 rated and suitable for RIGHT ANGLE mounting on boards.
DT06-3S-EP06
TE Connectivity's DT06-3S-EP06 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125°C. Ideal for cable mounting applications, it has a polarization key and UL 94V-0 flammability code.
22-03-5045
The Molex 22-03-5045 is a board connector with 4 contacts, featuring a mating contact pitch of 0.098", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
851-43-025-10-002000
Mill-max Mfg
851-43-025-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, TIN finish. It has a terminal pitch of 1.27mm and uses SOLDER termination. Ideal for applications requiring FEMALE SOCKET connectors in STRAIGHT mounting style.
22-27-2061
The Molex 22-27-2061 is a board connector with 6 contacts, rated at 2.5A signal current. It features a mating contact pitch of 0.1", insulation resistance of 5000000000 ohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications requiring reliable connections in temperatures ranging from -40 to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43650-0212
The Molex 43650-0212 is a board connector with 0.118" mating contact pitch, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 100u plating thickness. Ideal for applications requiring a durable male connector with 5A signal current rating, operating b/w -40 to 105°C in commercial settings.
43650-0213
Molex 43650-0213 is a board connector with 0.118" pitch, suitable for commercial applications. Featuring matte tin finish, it offers 1000000000 ohm insulation resistance and operates b/w -40 to 105 °C. Ideal for PCB mounting with GLASS FILLED LIQUID CRYSTAL POLYMER insulator material.
43650-0512
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
43650-0612
43650-0214
The Molex 43650-0214 is a board connector with a mating contact pitch of 0.118", insulation resistance of 1G ohm, and dielectric voltage of 1500VAC. It is used in applications requiring a durable, right-angle receptacle with surface mount termination for signal currents up to 5A.
43650-0312
The Molex 43650-0312 is a board connector with 0.118" mating contact pitch, 1000000000 ohm insulation resistance, and 1500VAC dielectric voltage. Ideal for applications requiring a durable, right-angle receptacle with female contacts and bright tin finish. Operating temperature range from -40 to 105 °C.
43650-0314
43650-0414
The Molex 43650-0414 is a board connector with 0.118" mating contact pitch, GLASS FILLED LIQUID CRYSTAL POLYMER insulator, and 1500VAC dielectric voltage. Ideal for applications requiring a durable, polarized housing with 4 contacts, rated at 5A signal current and operating temperatures from -40 to 105°C.
43650-0912
The Molex 43650-0912 is a board connector with a mating contact pitch of 0.118", insulation resistance of 1GΩ, and a dielectric withstand voltage of 1500VAC. It is commonly used in applications requiring a durable and reliable connection, such as commercial electronics.
43650-0219
43650-0712
43650-0506
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Terminal Pitch (mm): 3; Total No. of Contacts: 5; No. of Rows Loaded: 1;
43650-0413
The Molex 43650-0413 header connector features a body length of 0.616", insulation resistance of 1Gohm, and matte tin finish. Ideal for board mounting with GLASS FILLED LCP insulator, it operates b/w -40 to 105°C. With a total of 4 contacts in a right-angle plug style, it offers high reliability for commercial applications.
43650-1012
43650-1112
43650-1212
43650-1018
43650-1118
43650-1218
43650-1219
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved