Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Median Price
$0.377
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$0.282
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
Mouser Electronics
$0.540
$0.364
$0.266
$0.231
TTI Europe
Newark
$0.472
$0.371
Digiode
$0.532
Vyrian
$0.560
TME
$0.236
$0.223
IBS Electronics
$0.243
$0.226
Corphita
$0.504
Andel Nordic
$4.152
$3.986
Perfect Parts
Assy Fe
Power Connectors 43640-0211 attributes and parameters. Explore more Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
43640-0211 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Space Power Electronics
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
43045-2200
Molex
The Molex 43045-2200 is a rectangular power connector with 22 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durable connectors with high dielectric strength and polarization key for secure connections.
172166-1
TE Connectivity 172166-1 is a rectangular power connector with 0.165" contact pitch, rated at 600V and operating from -20 to 105°C. It has POLYAMIDE66 insulation, suitable for commercial applications requiring a durable, polarized housing with crimp termination on cables.
1-480711-0
TE Connectivity 1-480711-0 is a Power Connector with dimensions 1.3" x 1.02" x 1.08". It has an Insulation Resistance of 100MΩ, operating from -55°C to 105°C. With a total of 15 contacts, it is used in commercial applications requiring durable male connectors for power transmission at up to 115/230VAC.
39-29-9045
Molex 39-29-9045 is a rectangular power connector with 0.165" contact pitch, suitable for board mounting with 30u plating thickness. It has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications requiring durable connectors with high insulation resistance and UL certification.
105313-1202
1-480698-0
TE Connectivity 1-480698-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 0.58" x 0.55" x 1.08" dimensions, operates b/w -55 to 105 °C, and offers 1000000000 ohm insulation resistance. Ideal for commercial applications requiring durable, crimped cable termination at 115/230VAC mains connector rating.
43045-1600
The Molex 43045-1600 is a rectangular power connector with 16 contacts, featuring a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings, it offers durability of 30 cycles and operates b/w -40°C to 105°C temperature range.
43025-0410
Power Connectors;
350809-1
The TE Connectivity 350809-1 Power Connector features POLYAMIDE insulator, 105°C max operating temp, and UL 94V-0 flammability rating. With a body size of 1.3" x 0.58" x 1.08", it is ideal for commercial applications requiring a female crimp terminal plug with rectangular contact pattern at 115/230VAC mains connector rating.
39-28-1243
The Molex 39-28-1243 is a rectangular power connector with a body length of 2.07", body width of 0.38", and body depth of 0.5". It is commonly used in board mounting applications, has a max operating temperature of 105°C, and offers excellent insulation resistance of 1GΩ.
10-10-1033
The Molex 10-10-1033 is a rectangular power connector with 3 contacts, rated at 7A. It features a mating contact pitch of 0.2", insulation resistance of 500000000000 ohm, and dielectric voltage of 1500VDC. Ideal for board mounting applications in commercial settings due to its durability and reliability.
43650-0427
The Molex 43650-0427 is a rectangular power connector with 4 contacts, rated at 8.5A signal current. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for board mounting applications, it offers a dielectric voltage withstand of 1500VAC and uses liquid crystal polymer insulator material.
43045-0800
Molex 43045-0800 is a rectangular power connector with 8 contacts, rated at 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with bright tin finish and LCP insulator material.
350720-4
TE Connectivity's 350720-4 is a rectangular power connector with 9 contacts, POLYAMIDE insulator, and UL94V-0 flammability rating. It operates b/w -55 to 125°C, suitable for commercial applications requiring durable crimp terminations in cable mounting setups.
1954289-1
TE Connectivity 1954289-1 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates b/w -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.
39-28-8120
Molex 39-28-8120 is a rectangular power connector with 12 contacts, made of brass and tin copper finish. It has a body size of 1.04" x 0.38" x 0.5", withstands up to 2200VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring high durability and reliability meeting CSA, TUV, UL standards.
39-01-2021
The Molex 39-01-2021 is a rectangular power connector with 0.425" body length, 0.46" width, and 0.94" depth. It has an insulation resistance of 1000000000 ohm and dielectric voltage of 1500VAC. Ideal for commercial applications, this connector features a POLYAMIDE insulator and operates b/w -40 to 105°C temperatures.
15-06-0061
Molex 15-06-0061 is a RECTANGULAR POWER CONNECTOR with 6 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It has a body size of 1.748" x 0.681" x 0.772", operating from -40°C to 105°C. Ideal for commercial applications requiring reliable power connections in panel-mounted configurations.
39-01-2126
The Molex 39-01-2126 is a rectangular power connector with 12 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. It is used in commercial applications for cable and panel mounting, featuring a durability of 30 cycles and operating temperatures from -40 to 105°C.
1954289-3
TE Connectivity's 1954289-3 is a rectangular power connector with a dielectric voltage of 1500VAC and a rated current of 6A. It is commonly used in power applications, offering a surface mount termination type and a right angle mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved