Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 5000VAC; No. of Connectors: ONE;
Median Price
$1.660
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.300
1k+ parts
$1.080
10k+ parts
$0.811
Digiode
$1.634
-
Vyrian
$1.720
Corphita
$1.548
Andel Nordic
$2.070
$1.987
Power Connectors 43160-6302 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Plating Thickness (inch):
Reference Standard:
Reliability:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
43160-6302 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
National Semiconductor
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
SS14
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
93445-3501
Molex
Molex 93445-3501 is a rectangular power connector with GLASS FILLED POLYAMIDE insulator. It has 4 contacts, rated at 13A signal current. Ideal for cable mounting applications, operating b/w -55 to 125°C temperature range.
43045-1018
Molex 43045-1018 is a rectangular power connector with 10 contacts, made of brass and LCP insulator. It has an insulation resistance of 1Gohm, withstands up to 1000VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
1723163310
Molex 1723163310 power connector features liquid crystal polymer insulator, UL 94V-0 flammability rating, and male SQ pin-skt contact style. With a temperature range of -40 to 105°C, it is ideal for board mounting applications requiring a reliable 10-contact connection.
2002411114
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1645526-1
TE Connectivity 1645526-1 is a RECTANGULAR POWER CONNECTOR with 4 contacts, rated for 250V and 16A. Made of POLYESTER, it operates b/w -55 to 125 °C. Ideal for board mounting applications requiring a press fit termination in a right angle male contact pattern.
10-84-5020
The Molex 10-84-5020 is a rectangular power connector with 2 contacts, featuring bright tin termination finish and polyester insulator material. It has an insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
43650-0301
Molex 43650-0301 is a rectangular power connector with 3 contacts, 0.118" pitch, and 0.172" body width. It features matte tin over nickel finish, glass-filled liquid crystal polymer insulator, and UL 94V-0 flammability rating. Ideal for board mounting applications requiring reliable commercial-grade power connections.
1054311106
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
39-01-2140
Molex 39-01-2140 is a RECTANGULAR POWER CONNECTOR with 14 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It has a temperature range of -40 to 105 °C and is ideal for commercial applications requiring high insulation resistance and crimp termination on cables.
462070006
Molex 462070006 is a rectangular power connector with 6 contacts, rated at 12A signal current. It features liquid crystal polymer insulation, matte tin over nickel finish, and polarization key for secure mating. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -40 to 105°C.
556879-6
TE Connectivity's 556879-6 is a rectangular power connector with 6 contacts, rated at 600V and 35A. Made of polycarbonate, it offers high insulation resistance of 5G ohm. Ideal for commercial applications, this connector has a durability of 100 cycles and operates in temperatures ranging from 0 to 105°C.
VLR-02V
J S T Mfg
VLR-02V by J S T Mfg is a POWER CONNECTOR with POLYAMIDE66 insulator material. It features 2 contacts, CRIMP termination, and FEMALE contact gender. Ideal for CABLE AND PANEL mounting applications due to its UL 94V-0 flammability rating.
1954289-2
TE Connectivity's 1954289-2 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates in temperatures ranging from -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.
IPD1-05-D-K-R
Samtec
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Termination Contact Finish: NOT APPLICABLE; Mounting Type: CABLE;
15-24-7100
15-24-7100 by Molex is a rectangular power connector with 10 contacts, featuring a body length of 0.87", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for board mounting applications, it has a contact material of brass and insulator material of Polyamide66.
1969688-3
TE Connectivity 1969688-3 is a rectangular power connector with 600V rated voltage and 19A signal current. It uses GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material for applications requiring board mounting, solder termination, and operating temperatures from -55 to 105°C.
2-1103004-3
TE Connectivity's 2-1103004-3 is a rectangular power connector with 15 contacts, made of POLYETHYLENE. It features UL 94V-0 flammability rating and crimp termination. Ideal for cable mounting applications in various industries.
1-480698-0
TE Connectivity 1-480698-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 0.58" x 0.55" x 1.08" dimensions, operates b/w -55 to 105 °C, and offers 1000000000 ohm insulation resistance. Ideal for commercial applications requiring durable, crimped cable termination at 115/230VAC mains connector rating.
09062152811
Harting Electronics & Kg
Harting Electronics & Kg 09062152811 is a rectangular power connector with 15 contacts, silver termination finish, and DIN conformance. Ideal for panel mounting applications requiring female contact gender and UL94V-0 flammability rating.
428192223
428192223 by Molex is a power connector with dimensions of 0.937" x 0.555" x 0.827". It has an insulation resistance of 1GΩ and can withstand a voltage of 2200VAC. This male connector, made of glass-filled polyamide46, is suitable for board mounting and has a rated current of 50A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved