Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 39-01-2126 is a rectangular power connector with 12 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. It is used in commercial applications for cable and panel mounting, featuring a durability of 30 cycles and operating temperatures from -40 to 105°C.
Median Price
$0.640
Lifecycle Status
Suppliers In-Stock
40
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.280
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
$0.386
$0.374
$0.369
Avnet
$0.476
$0.409
Interstate Connecting
$0.494
$0.414
$0.391
Arrow
$0.689
$0.573
$0.504
Farnell
$0.823
$0.486
$0.461
Newark
$0.903
$0.613
$0.556
Mouser Electronics
$0.980
$0.589
$0.539
$0.520
Bürklin Elektronik
$1.000
$0.450
Distrelec
$1.039
$0.909
$0.541
DigiKey
$1.140
$0.788
$0.630
Element14
$1.180
$0.840
$0.802
$0.800
Misumi USA
$1.630
RS (Exports)
$0.932
$0.894
$0.722
Verical
$0.591
Powell Electronics
$0.507
$0.427
TTI Europe
$0.356
$0.340
TTI
$0.525
Chip1Stop
$0.278
Master Electronics
$0.518
PSC Electronics
Digiode
$0.266
DF Sales Co.
$0.480
TestEquity
$0.550
Nova Conductors
$0.584
TME
$0.950
$0.568
IBS Electronics
$0.561
$0.477
NAC Semi
$0.643
$0.595
Vyrian
VNN
Q Components
Resion
Bristol Electronics
$1.024
Connector Distribution Corp
Right Parts Inc.
QIE Inc.
Elcom Components
ECAB
PC Components Company LLC
Semicontronic
$0.236
$0.230
$0.229
Corphita
$0.252
Argo Parts USA
$0.566
Continental Prestige Electronics
$0.958
$0.577
Aztec Data Supply Inc.
$5.867
Perfect Parts
GreenTree Electronics
Assy Fe
Abacus Technologies
Eastek
EMSNET (Excess)
The compact size of the body allows for easy installation in tight spaces.
High insulation resistance ensures reliable and safe operation of the connector.
High voltage rating ensures the connector can withstand electrical stress.
Can operate in high-temperature environments without degrading performance.
Suitable for use in extreme cold conditions as well.
Provides multiple connection points for different power needs.
Crimping ensures secure connection and easy installation.
FRICTION RAMP mounting option provides secure attachment to prevent accidental disconnection.
The square pin/socket contact style ensures a reliable and stable electrical connection.
Meets commercial standards for reliability and performance.
Power Connectors 39-01-2126 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
39-01-2126 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Packaging - 5559,46993 Series Packaging 13/Dec/2017 5559,46993 Series Packaging 13/Dec/2017
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Diotec Semiconductor Ag
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Microsemi
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Multicomp Pro
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Bkc Semiconductors
Gec Plessey Semiconductors
350431-1
TE Connectivity's 350431-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It features 6 contacts, rated at 12A, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with tin finish contacts.
43640-0400
Molex
The Molex 43640-0400 is a rectangular power connector with 4 contacts, rated for 5A signal current. It features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for cable and panel mounting applications requiring durable, polarized connectors with UL certification.
10-10-1033
The Molex 10-10-1033 is a rectangular power connector with 3 contacts, rated at 7A. It features a mating contact pitch of 0.2", insulation resistance of 500000000000 ohm, and dielectric voltage of 1500VDC. Ideal for board mounting applications in commercial settings due to its durability and reliability.
15-06-0100
Molex 15-06-0100 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. It has 10 contacts, operates b/w -40 to 105 °C, and offers high insulation resistance of 1G ohm. Ideal for commercial applications requiring reliable power connections in panels with solder termination.
39-30-3046
Molex 39-30-3046 is a rectangular power connector with 4 contacts, featuring insulation resistance of 1Gohm and dielectric voltage of 500VDC. Ideal for board mounting applications, it has a temperature range from -40 to +105 °C and durability of 30 cycles.
39-30-1121
Molex 39-30-1121 is a rectangular power connector with 12 contacts, gold-plated termination, and polyamide66 insulator. It has a mating contact pitch of 0.165", withstands up to 1500VAC, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durability, reliability, and signal current rating of 6A.
10-84-5040
The Molex 10-84-5040 is a rectangular power connector with 4 contacts, tin finish, and 138u plating thickness. It has an insulation resistance of 1Gohm, withstands up to 500VAC, and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
IPL1-102-01-S-S-K
Samtec
Samtec IPL1-102-01-S-S-K is a rectangular power connector with 2 contacts, rated at 5A signal current. It features a mating contact pitch of 0.1", dielectric voltage of 675VAC, and operates b/w -55°C to 125°C. Ideal for board mounting applications in commercial settings, it uses phosphor bronze contacts with gold finish over nickel for reliability.
DF22R-2P-7.92DSA(53)
Hirose Electric
DF22R-2P-7.92DSA(53) by Hirose Electric is a POWER CONNECTOR with GLASS FILLED POLYAMIDE insulator, 2 contacts, and 0.678" x 0.49" x 0.713" dimensions. It operates b/w -55 to 85°C, UL94V-0 rated, suitable for BOARD mounting with SOLDER termination.
10-08-1081
Molex 10-08-1081 is a rectangular power connector with 8 contacts, featuring brass contact material and matte tin finish. With a mating pitch of 0.2", it offers high insulation resistance of 1000000000 ohm. Ideal for board mounting applications in commercial settings, operating b/w -40 to 80°C.
43879-0032
Molex 43879-0032 is a rectangular power connector with 24 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability under commercial standards.
1-480319-0
TE Connectivity 1-480319-0 is a Power Connector with 0.61"x.33"x.94" dimensions, POLYAMIDE insulator, and -55 to 105°C operating temperature range. It has 2 contacts for crimp termination in cable mounting applications at 115/230VAC mains connector rating.
1053081204
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
178289-6
TE Connectivity's 178289-6 is a rectangular power connector with glass-filled polyester insulator. It has 12 contacts, operates b/w -55 to 105°C, and meets UL standards. Suitable for cable mounting applications at 115/230VAC mains connector rating, featuring female crimp terminals in black color.
43045-0612
The Molex 43045-0612 is a rectangular power connector with 6 contacts, rated for 5A signal current. Featuring bright tin over nickel termination finish, it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for board mounting applications, this durable connector with LCP insulator is UL94V-0 compliant.
34576-0703
Molex 34576-0703 is a RECTANGULAR POWER CONNECTOR with 56 contacts, ideal for BOARD mounting. Made of GLASS FILLED SYNDIOTACTIC POLYSTYRENE, it features FEMALE contacts and SOLDER termination. Commonly used in applications requiring high-power connections.
36804-0001
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 36804; Contact Material: NOT SPECIFIED;
0-0350782-1
TE Connectivity's 0-0350782-1 is a panel mount rectangular power connector with insulation resistance of 1000000000 ohm. With UL Flammability Code 94V-0, it has a rated current of 19 A and operates b/w -55 to 105 °C. Ideal for commercial applications requiring durable male connectors with crimp termination.
39-30-1180
The Molex 39-30-1180 is a rectangular power connector with a mating contact pitch of 0.165 inches and a body length of 1.535 inches. It has an insulation resistance of 1000000000 ohms and is commonly used in power applications requiring a durable and reliable connection.
176301-1
TE Connectivity's 176301-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. It has 18 contacts, rated at 7A, and operates b/w -30 to 105°C. Ideal for PANEL mounting, it offers high durability with a min withdrawal force of 0.556N and max insertion force of 4.448N.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-01-2065
Molex 39-01-2065 is a rectangular power connector with 6 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It has a 0.543" body length, 0.46" width, and 0.77" depth. Ideal for commercial applications requiring reliable crimp termination in temperatures ranging from -40 to 105°C.
39-01-2040
Molex 39-01-2040 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable and panel mounting configurations.
39-01-2025
The Molex 39-01-2025 is a rectangular power connector with insulation resistance of 1000000000 ohm and dielectric voltage of 1500VAC. It is used in commercial applications, featuring a body length of 0.213", operating temperature range from -40 to 105 °C, and termination type as crimp.
39-01-2020
The Molex 39-01-2020 is a rectangular power connector with 0.213" body length, 0.42" width, and 0.77" depth. Featuring POLYAMIDE66 insulator material, it has an insulation resistance of 1Gohm and dielectric voltage of 1500VAC. Ideal for commercial applications, this connector operates b/w -40°C to 105°C and offers reliable performance in cable termination setups.
39-01-2045
Molex 39-01-2045 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It operates b/w -40 to 105°C, suitable for commercial applications requiring high insulation resistance and UL certification. Ideal for cable and panel mounting with crimp termination, offering reliable performance in various electrical setups.
39-01-2060
Molex 39-01-2060 Power Connector features 6 contacts, with 0.543" body length and 0.46" width. Insulation resistance of 1Gohm, dielectric voltage of 1500VAC, and operating temp range from -40 to +105°C. Ideal for commercial applications requiring reliable power connections in various industries.
39-01-2085
The Molex 39-01-2085 is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable mounting setups.
39-01-4030
Molex 39-01-4030 is a rectangular power connector with 3 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. It has a 0.54" body length, 0.29" width, and 0.81" depth. Ideal for commercial applications requiring reliable crimp termination in temperatures ranging from -40 to 105°C.
39-01-2080
The Molex 39-01-2080 is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It operates b/w -40 to 105 °C and has a contact resistance of 10 mohm. Ideal for commercial applications requiring reliable crimp termination in cable mounting setups.
39-01-2041
Molex 39-01-2041 is a rectangular power connector with 4 contacts, made of brass. It has a mating contact pitch of 0.165", insulation resistance of 1G ohm, and operates b/w -40 to 105°C. Ideal for cable and panel mounting applications requiring durability up to 30 cycles.
39-01-2021
The Molex 39-01-2021 is a rectangular power connector with 0.425" body length, 0.46" width, and 0.94" depth. It has an insulation resistance of 1000000000 ohm and dielectric voltage of 1500VAC. Ideal for commercial applications, this connector features a POLYAMIDE insulator and operates b/w -40 to 105°C temperatures.
39-01-3028
Molex 39-01-3028 is a rectangular power connector with POLYAMIDE66 insulator. It has 2 contacts, female gender, and crimp termination. With UL94V-0 flammability rating, it's ideal for commercial applications requiring reliable cable mounting with straight style and locking option.
39-01-2161
Molex 39-01-2161 is a rectangular power connector with 16 contacts, POLYAMIDE insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for commercial applications requiring durable crimp termination in panel mounting setups. With UL certification and polarization key, it offers reliable connectivity for power systems.
39-01-2061
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; DIN Conformance: NO;
39-01-4031
Molex 39-01-4031 is a rectangular power connector with 3 contacts, made of POLYAMIDE insulator material. It has a dielectric voltage rating of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications requiring high insulation resistance and UL94V-0 flammability compliance.
39-01-3023
Molex 39-01-3023 is a rectangular power connector with 2 rows, insulation resistance of 1Gohm, and operating temp range from -40 to 105°C. Ideal for cable and panel mounting applications due to its durability of 30 cycles, crimp termination type, and male contact gender.
39-01-2100
Molex 39-01-2100 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It is used in commercial applications for crimp termination on cables and panels, offering high insulation resistance of 1Gohm and operating temperature range from -40 to 105°C.
39-01-2125
Molex 39-01-2125 is a rectangular power connector with 12 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable power connections in cable and panel setups.
39-01-2120
Molex 39-01-2120 is a rectangular power connector with 12 contacts, TIN finish, and polyamide66 insulator. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable female crimp connectors in cable and panel mounting setups.
39-01-2105
The Molex 39-01-2105 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, has a dielectric strength of 1500VAC, and features crimp termination for female contacts. Ideal for commercial applications requiring reliable power connections in tight spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved