Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Rows: 2; No. of Decks: 1;
Median Price
$4.711
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$3.145
100+ parts
$2.757
1k+ parts
$2.489
10k+ parts
-
Heilind Electronics
$3.375
$2.839
$2.669
Sager
$3.420
Master Electronics
$3.487
$3.170
$2.580
Farnell
Mouser Electronics
$4.720
$3.440
$3.070
$2.940
Element14
$4.904
$3.428
$3.115
RS Americas
$5.160
$3.970
$3.510
RS (Exports)
$5.790
$4.170
$3.650
DigiKey
$6.070
$3.770
$2.786
TTI
$3.000
$2.890
PEI Genesis
Chip1Stop
$3.900
Verical
$5.656
Nova Conductors
$2.680
Digiode
$3.164
TME
$9.370
$4.040
VNN
Vyrian
North Shore Components
Jameco Electronics
Q Components
IBS Electronics
$3.588
Bristol Electronics
Resion
Continental Prestige Electronics
$2.170
$2.127
Argo Parts USA
Semicontronic
$2.550
$2.486
$2.474
Bastille Electronics
$2.546
$2.419
$2.385
Corphita
$2.997
Andel Nordic
$3.494
$3.355
Authorized Procurement Solutions
Aztec Data Supply Inc.
Perfect Parts
Infinite Electronics LLP (Excess)
Terminals & Terminal Blocks 38770-0104 attributes and parameters. Explore more Terminals & Terminal Blocks devices from Molex
Product Type:
Additional Features:
Total Ways:
Total Decks:
Total Rows:
Mounting Style:
Fastening Style:
38770-0104 Terminals & Terminal Blocks trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Assembly/Origin - Mult Devs Supplier 19/Sep/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
EU2B-YS3203F
Idec
ROTARY SWITCH;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
Synsemi
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
19002-0024
Molex
PUSH-ON TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2 mm2; Terminal Gender: FEMALE;
4-520448-2
TE Connectivity
TE Connectivity 4-520448-2 is a UL-approved PUSH-ON TERMINAL for 10 AWG wire, rated at 600V. With a wire cross section of 5.26 mm2, it's ideal for applications requiring FEMALE terminals in various industries.
MS25036-115
RING TERMINAL; Wire Gauge: 8 AWG; Wire Cross Section: 10.5 mm2; No. of Ways: 1; Safety Approval: UL;
619
Tyco Electronics Amp
MODULAR TERMINAL BLOCK; Mounting Type: CABLE; Fastening Method: SCREW; Additional Features: POLYAMIDE; Wire Gauge: 8 AWG; Voltage (Rated): 300 V;
MSTB2.5/2-ST-5.08
Phoenix Contact
Phoenix Contact's MSTB2.5/2-ST-5.08 is a 2-way barrier strip terminal block with a rated voltage of 250V and current of 12A, suitable for 12 AWG wires. It features screw fastening and safety approvals like CB, CSA, UL, making it ideal for industrial applications requiring secure wire connections.
1935161
Phoenix Contact 1935161 is a UL-approved barrier strip terminal block for BOARD mounting. With a rated voltage of 250V, it supports wire gauge up to 14 AWG and current up to 17.5A. Ideal for applications requiring secure connections in industrial control systems.
MCV1,5/4-G-3,5
The Phoenix Contact MCV1,5/4-G-3,5 is a 4-way barrier strip terminal block with a rated voltage of 160V and current of 8A. It supports wire gauge up to 15 AWG and wire cross-section of 1.5mm2, making it ideal for board mounting applications requiring secure connections. Safety approvals include CB, CSA, CUL, EAC, UL, and VDE.
320551
TE Connectivity 320551 is a UL-approved FEMALE RING TERMINAL for 16 AWG wire with 300V rating. Ideal for electrical connections in various applications requiring secure and reliable terminal blocks.
1714971
Phoenix Contact 1714971 is a BARRIER STRIP TERMINAL BLOCK with 2 ways, rated for 32A current and 1000V voltage. It supports wire gauge up to 10 AWG and wire cross section of 4 mm². Ideal for BOARD mounting, it has safety approvals from CCA, CSA, CUL, EAC, GL, and SEV.
1SNK506315R0000
TE Connectivity's 1SNK506315R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. It supports wire gauge up to 10 AWG, voltage rating of 300V, and current rating of 25A. Ideal for applications requiring secure electrical connections in industrial settings.
1952283
The Phoenix Contact 1952283 is a BARRIER STRIP TERMINAL BLOCK with 4 ways, rated for 8A current and 160V voltage. It has safety approvals from CB, CUL, EAC, UL, VDE. Ideal for connecting wires of 1.5mm2 cross section using push-in fastening method in various applications requiring reliable electrical connections.
D-436-38-COLD
BUTT TERMINAL; Mounting Type: CABLE; Wire Gauge: 12 AWG; Safety Approval: UL; Wire Cross Section: 2.94 mm2;
733-366
Wago
Wago 733-366 is a STRIP TERMINAL BLOCK with 6 ways, rated for 150V and 4A. It uses CONNECTOR fastening method and holds safety approvals from ABS, CCA, CSA, DNVGL, EN, IEC. Ideal for BOARD mounting applications in various industries.
5-796634-2
TE Connectivity 5-796634-2 is a STRIP TERMINAL BLOCK with 2 ways, UL approved for 12 AWG wire. Mount on CABLE using SCREW fastening. Ideal for industrial and electrical applications.
2-33457-2
RING TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 6 mm2; Safety Approval: UL; Terminal Gender: FEMALE; No. of Ways: 1;
2060-452/998-404
Wago 2060-452/998-404 is a UL-approved barrier strip terminal block with 2 ways, rated for 9A current and 250V voltage. It supports wire gauge up to 18 AWG (0.75 mm2) and mounts on board using push-on fastening method. Ideal for electrical connections in various applications.
1759398
Phoenix Contact 1759398 is a UL-approved BARRIER STRIP TERMINAL BLOCK with 6 ways, rated for 12A current and 320V voltage. It supports wire gauge up to 12 AWG and wire cross section of 2.5 mm², mounted using SCREW fastening method. Ideal for industrial applications requiring secure electrical connections.
PMNF1-3R-3K
Panduit
RING TERMINAL; Wire Gauge: 18 AWG; Wire Cross Section: 1.5 mm2;
282834-2
MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Wire Gauge: 16 AWG; Voltage (Rated): 150 V; Safety Approval: UL;
2-32589-1
FORK TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Wire Cross Section: 6 mm2; Terminal Gender: FEMALE; Safety Approval: UL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
38770-0112
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Ways: 24; No. of Rows: 2;
38770-0103
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Ways: 6; No. of Decks: 1;
38770-0105
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Rows: 2; No. of Ways: 10;
387700108
BARRIER STRIP TERMINAL BLOCK; Mounting Type: PANEL; Fastening Method: SCREW; Additional Features: POLYBUTYLENE TEREPHTHALATE; No. of Rows: 2; No. of Ways: 16;
38770-0528
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: POLYBUTYLENE TEREPHTHALATE; No. of Ways: 28; No. of Rows: 1;
38770-0106
Molex 38770-0106 is a 2-row barrier strip terminal block with screw fastening method. It has 12 ways and 1 deck, making it suitable for board mounting applications.
387702012
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: THERMOPLASTIC; No. of Ways: 24; No. of Rows: 2;
38770-0107
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Ways: 14; No. of Rows: 2;
38770-0114
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Ways: 28; No. of Decks: 1;
38770-0115
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Rows: 2; No. of Ways: 30;
38770-0116
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Ways: 32; No. of Decks: 1;
38770-0118
38770-0120
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Rows: 2; No. of Ways: 40;
38770-0122
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Ways: 44; No. of Rows: 2;
38770-0123
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Rows: 2; No. of Ways: 46;
38770-0125
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Decks: 1; No. of Rows: 2;
38770-0127
38770-0128
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Rows: 2; No. of Ways: 56;
38770-0129
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Rows: 2; No. of Ways: 58;
38770-0130
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PBT; No. of Decks: 1; No. of Ways: 60;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved