Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
Median Price
$3.150
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.550
100+ parts
$1.830
1k+ parts
-
10k+ parts
DigiKey
$4.550
TTI
$3.030
$2.210
Digiode
$2.802
Vyrian
$2.950
Andel Nordic
$1.110
$1.065
Corphita
$2.655
Headers & Edge Type Connectors 348300803 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
Filter Feature:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
348300803 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
Diodes Incorporated
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Space Power Electronics
RC0603FR-0710KL
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
LM317T/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
3-5353652-6
TE Connectivity
TE Connectivity 3-5353652-6 is a board stacking connector with 220+220 contacts, 0.019" mating pitch, and 200VAC dielectric voltage. Ideal for commercial applications, it features POLYETHYLENE insulation, 0.5A signal current rating, and -40 to 85°C operating temperature range.
DTM06-6S
DTM06-6S by TE Connectivity is a 2-row loaded board connector with a body length of 1.185", width of 0.6", and depth of 0.817". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used in applications requiring a polarized housing, such as cable mounting with strain relief.
22-11-2022
Molex
Molex 22-11-2022 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring polyamide insulation material, it offers 1000000000 ohm insulation resistance and operates b/w 0-75°C. With a matte tin over nickel termination finish, this male connector has a durability of 50 cycles and is ideal for commercial applications requiring a rated current of 4A.
50-57-9402
The Molex 50-57-9402 is a board connector with a mating contact pitch of 0.1 inch and a body length of 0.199 inch. It has an insulation resistance of 10^10 ohm and is commonly used in commercial applications requiring a reliable, polarized housing for signal currents up to 3 A.
22-23-2031
The Molex 22-23-2031 is a board connector with 3 male contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1G ohm, and body length of 0.294". It is used in commercial applications, with UL flammability rating of 94V-0 and termination via solder for reliability.
803-43-038-10-003000
Mill-max Mfg
803-43-038-10-003000 by Mill-max Mfg is a 2-row, 38-contact board connector with gold finish. Featuring a terminal pitch of 2.54mm, it is solder termination and female gendered for socket applications on boards.
TCMD-08-01
Samtec
Samtec's TCMD-08-01 is a 2-row board connector with 16 contacts made of phosphor bronze. It has a terminal pitch of 2mm and supports IDC/solder termination. Ideal for applications requiring male contact gender, straight mounting style, and compatibility with both board and cable mounting types.
50-57-9007
The Molex 50-57-9007 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It has 7 female contacts with SQ pin-skt style for cable mounting applications. The UL 94V-0 rated connector is made of glass filled polyester and meets commercial reliability standards.
43025-2400
The Molex 43025-2400 is a 24-contact board connector with 0.118" pitch, suitable for commercial applications. Featuring polyester insulation and UL94V-0 flammability rating, it operates b/w -40°C to 105°C. With a rated current of 2.5A, this female connector has a crimp termination type and requires min withdrawal force of 3.5584N.
B6B-XH-A(LF)(SN)
J S T Mfg
B6B-XH-A(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. It features POLYAMIDE66 insulator material, TIN OVER COPPER mating contact finish, and operates b/w -25 to 85 °C. Ideal for board-to-board connections in electronics applications.
1761606-3
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Manufacturer Series: 1761606; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
10-11-2023
Molex 10-11-2023 is a board connector with 0.1" mating contact pitch, POLYAMIDE insulator, and 1000VAC dielectric voltage. It's ideal for commercial applications requiring a durable, polarized housing with 2 contacts and crimp termination for 22-30 AWG wires.
350777-1
AMPHENOL ICC
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Minimum Wire Size: 30 AWG; Insulator Material: POLYAMIDE; Body or Shell Style: PLUG;
22-28-4020
Molex 22-28-4020 is a board connector with 0.1" pitch, ideal for commercial applications. Featuring bright tin finish, it offers 25 cycles durability and 10 mohm contact resistance. With a rectangular PCB contact pattern and solder termination, this male connector has a total of 2 contacts in a black insulator body.
51021-0400
The Molex 51021-0400 is a board connector with 4 contacts, 0.049" pitch, and 353VAC voltage rating. Ideal for commercial applications, it features a polarization key, POLYBUTYLENE TEREPHTHALATE insulator, and operates b/w -40 to 105°C.
XF2M-3015-1A-R100
Omron
Omron XF2M-3015-1A-R100 is a FFC/FPC connector with 30 contacts, rated at 0.5A signal current. It features gold (Au) - nickel (Ni) finish, 0.020" pitch, and liquid crystal polymer insulator. Suitable for board mounting applications with durability of 20 cycles and operating temperature range from -30 to 85°C.
78171-0004
Molex 78171-0004 is a board connector with 0.047" pitch, suitable for applications requiring 1.5A signal current. Featuring gold nickel finish and liquid crystal polymer insulator, it offers durability of 10 cycles. With a temperature range of -25 to 85°C, this male connector has a total of 4 contacts and is UL certified for reliability in commercial settings.
BM02B-GHS-TBT(LF)(SN)(N)
BM02B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a 1-row, surface mount board connector with tin termination contact finish. It has 2 contacts and a terminal pitch of 1.25mm. This connector is commonly used in headers & edge type connectors for various applications.
MM60-52B1-E1-R650
Japan Aviation Electronics Industry
MM60-52B1-E1-R650 by Japan Aviation Electronics is a 52-contact card edge connector with gold over nickel finish. It has a mating contact pitch of 0.031", operates b/w -40 to 80°C, and offers a dielectric voltage of 424VAC. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.
76155-5107
The Molex 76155-5107 is a board connector with 12 loaded rows and PCB contact row spacing of 1.3462mm. It features matte tin over nickel termination, glass-filled liquid crystal polymer insulator material, and copper alloy contacts. Ideal for commercial applications requiring reliable connections on PCBs with rectangular contact patterns.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved