Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 347630005 is a 6.26" x 1.63" board connector with GLASS FILLED POLYAMIDE66 insulator, featuring 154 contacts in a right angle mounting style. Ideal for applications requiring high-density connections on PCBs with split board lock mounting option and press fit termination.
Median Price
$36.480
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Farnell
1+ parts
100+ parts
$29.070
1k+ parts
-
10k+ parts
Chip Stock
VNN
Vyrian
Digiode
Nova Conductors
Andel Nordic
$3.565
$3.422
AZTECH Wire
$8.770
Corphita
Aranea Global
The long body length provides ample space for multiple rows of contacts, allowing for a high number of connections in a compact design.
The narrow body width makes this connector suitable for applications where space is limited on the PCB.
The use of glass filled polyamide66 as the insulator material ensures durability and reliability in various operating conditions.
With four rows loaded, this connector allows for a high number of connections to be made on the PCB, increasing the flexibility of the system.
The split board lock mounting option enables easy and secure installation on the PCB, reducing assembly time and improving reliability.
The tight contact row spacing of 2.5mm allows for high-density connections on the PCB, maximizing the use of available space.
With five PCB rows, this connector provides a sufficient number of connection points for complex electronic systems.
This connector type is specifically designed for connecting PCBs, ensuring a reliable and stable connection between boards.
The high total number of contacts allows for numerous connections to be made, making this connector ideal for applications requiring multiple signal paths.
Having three connectors provides redundancy and ensures continuity of connections in case one connector fails.
The board mounting type allows for easy installation on the PCB, securely holding the connector in place during operation.
The rectangular contact pattern ensures proper alignment and connection of the contacts on the PCB, reducing the risk of signal interference.
The press fit termination type provides a secure and reliable connection between the contacts and the PCB, reducing the risk of signal loss or disconnection.
The male contact gender is commonly used in electronic connectors, ensuring compatibility with a wide range of mating connectors.
The right-angle mounting style allows for easy connection of cables or other devices to the connector, enabling flexible installation options.
The square pin contact style provides a reliable and stable connection, minimizing signal loss and interference.
The mounting flange option adds stability and support to the connector when mounted on the PCB, reducing the risk of mechanical stress or damage.
The locking mounting option ensures that the connector stays securely attached to the PCB, even in high-vibration environments.
The rectangular contact pattern allows for easy alignment and connection of the contacts, ensuring a reliable and durable electrical connection.
Headers & Edge Type Connectors 347630005 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Board Mounting Option:
Body Width:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
Filter Feature:
Insulator Material:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Termination Type:
Total No. of Contacts:
347630005 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM358N
Intersil
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
Kec
EU2B-YS3203C
Idec
ROTARY SWITCH;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
2N2222A
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1-2199230-4
TE Connectivity
TE Connectivity 1-2199230-4, a card edge connector with 67 contacts, features 0.5A signal current rating. With POLYETHYLENE insulator and UL94V-0 flammability code, it operates b/w -40 to 80°C. Ideal for board mounting applications with right-angle mounting style.
SIM8066-6-1-14-01-A
Global Connector Technology
SIM8066-6-1-14-01-A by Global Connector Technology is a PCB connector with 2 rows, 6 contacts, and insulation resistance of 1000000000 ohm. It has a dielectric voltage of 500VAC, operates b/w -40 to 85 °C, and is ideal for applications requiring a durable female connector with right-angle mounting.
DM3AT-SF-PEJM5(42)
Hirose Electric
The Hirose Electric DM3AT-SF-PEJM5(42) PCB connector features a mating contact pitch of 0.043", insulation resistance of 1Gohm, and dielectric voltage rating of 500VAC. Ideal for commercial applications, this right-angle male connector has a total of 8 contacts and operates b/w -25°C to 85°C with durability up to 10k cycles.
50-57-9007
The Molex 50-57-9007 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It has 7 female contacts with SQ pin-skt style for cable mounting applications. The UL 94V-0 rated connector is made of glass filled polyester and meets commercial reliability standards.
20021321-00010C4LF
Amphenol Communications Solutions
The Amphenol Communications Solutions 20021321-00010C4LF is a board connector with 10 contacts, rated for 1A signal current. Featuring a mating contact pitch of 0.05", it has a durability of 100 cycles and operates b/w -55°C to 125°C. Ideal for applications requiring high insulation resistance and dielectric voltage withstand capabilities.
FTS-105-01-L-DV-P-TR
Samtec
Samtec FTS-105-01-L-DV-P-TR is a 10-contact board connector with 0.05" mating pitch, suitable for commercial applications. It features gold over nickel finish, liquid crystal polymer insulator, and matte tin termination. Ideal for PCBs with 1.27mm terminal pitch and operating temperatures from -55 to 125°C.
22-05-2081
Molex 22-05-2081 is a board connector with 8 contacts, featuring brass contact material and matte tin finish. With a mating pitch of 0.1", it offers high insulation resistance of 1000000000 ohm. Ideal for commercial applications, this connector has a durable design with UL flammability rating of 94V-0.
SHF-105-01-L-D-SM
SHF-105-01-L-D-SM by Samtec is a 2-row board connector with a mating contact pitch of 0.05". Featuring gold over nickel finish, it has a rated signal current of 1.75A and operates b/w -55 to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
912283001
Molex 912283001 is a PCB connector with 0.1" pitch, 0.984" body length, and bright tin finish. It has 2 rows, operates b/w -40 to 85°C, and offers durability of 5000 cycles. Ideal for board mounting applications in commercial settings due to its male contact gender and right-angle mounting style.
10124017-1022125LF
Amphenol Communications Solutions' 10124017-1022125LF is a 25-contact board stacking connector with 0.039" mating contact pitch and 707VAC dielectric voltage. Ideal for PCB applications, it features gold flash termination finish, liquid crystal polymer insulator, and male contact gender.
746-010-520-606
Edac
Edac 746-010-520-606 is a 2-row card edge connector with 10 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
TSW-103-07-G-S
Samtec's TSW-103-07-G-S is a 3-contact board connector with gold over nickel termination, ideal for commercial applications. Featuring a mating contact pitch of 0.1", body dimensions of 0.3" x 0.098" x 0.1", and operating temperatures from -55°C to 125°C, it offers reliable connectivity in various electronic devices. The connector's UL-certified insulator material and rectangular PCB contact pattern make it suitable for use in black-colored assemblies requiring high flammability resistance.
51700
AMPHENOL ICC
Amphenol Icc's 51700 board connector features mixed contacts, UL 94V-0 flammability rating, and 2.54mm terminal pitch. Ideal for applications requiring male contact gender, press fit or solder termination, and straight mounting style.
776286-1
TE Connectivity's 776286-1 is a 3-row board connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has a max operating temp of 125°C, -40°C min temp, and rated current of 17A. Ideal for cable mounting applications requiring a polarized, UL-rated female plug with strain relief option.
S4B-PH-K-S(LF)(SN)
J S T Mfg
S4B-PH-K-S(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C and insulation resistance of 1Gohm. It features brass contacts with tin finish, UL94V-0 flammability rating, and press-fit termination for signal currents up to 2A.
ISDF-10-S-M
ISDF-10-S-M by Samtec is a 10-contact board connector with gold over nickel finish. It features a mating contact pitch of 0.05", liquid crystal polymer insulator, and beryllium copper contacts. Ideal for commercial applications requiring a reliable female cable mount connector with rectangular contact pattern.
SHF-105-01-L-D-SM-TR
SHF-105-01-L-D-SM-TR by Samtec is a 10-contact, dual-row board connector with TIN over nickel finish. It features a terminal pitch of 1.27mm and surface mount termination for male contacts. Ideal for applications requiring straight mounting on boards in headers & edge type connectors category.
M50-3600542
Harwin Plc
The Harwin PLC M50-3600542 is a 10-contact board connector with 0.05" mating contact pitch, suitable for PCB applications. Featuring a 1A signal current rating, it has a durable design with 300 cycles lifespan and operates b/w -40°C to 105°C temperature range. The connector has tin finish contacts and polyethylene insulation material, meeting UL standards for reliability.
341-054-500-101
Edac 341-054-500-101 is a CARD EDGE CONNECTOR with 54 contacts at 0.1" pitch. It has an insulation resistance of 5Gohm, rated for 3A signal current, and operates b/w -40 to 105°C. Ideal for wire wrap termination in applications requiring high contact reliability and low withdrawal force.
1-102387-1
TE Connectivity 1-102387-1 is a 2-row board connector with 60 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.1", it has a body length of 3.1" and operates b/w -65°C to 105°C. Ideal for commercial applications requiring reliable female connectors with crimp termination in black polyethylene insulator material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
347630016
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: THREE; PCB Contact Row Spacing (mm): 2.5; Termination Type: PRESS FIT;
347630017
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: THREE; Insulator Material: GLASS FILLED POLYAMIDE66; Body Length: 6.26 inch;
347630009
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO; No. of PCB Rows: 5;
347630015
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: THREE; No. of Rows Loaded: 4; Total No. of Contacts: 154;
347630003
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 2.5; Body Length: 6.26 inch;
347630006
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: THREE; Contact Material: NOT APPLICABLE; Mounting Option-2: MOUNTING FLANGE;
347630010
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: THREE; Mounting Option-2: MOUNTING FLANGE; PCB Contact Pattern: RECTANGULAR;
347630012
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: THREE; Contact Material: NOT APPLICABLE; PCB Contact Pattern: RECTANGULAR;
347630002
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: TWO; Insulator Material: GLASS FILLED POLYAMIDE66; Filter Feature: NO;
347630004
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: TWO; Mixed Contacts: NO; Filter Feature: NO;
347630007
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 5; Board Mounting Option: SPLIT BOARD LOCK;
347630013
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: THREE; Termination Type: PRESS FIT; No. of Rows Loaded: 4;
347630011
347630014
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: THREE; PCB Contact Pattern: RECTANGULAR; PCB Contact Row Spacing (mm): 2.5;
347630008
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: THREE; Contact Style: SQ PIN; Mounting Option-1: LOCKING;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved