Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; Mounting Type: CABLE; Empty Shell: NO;
Median Price
$1.243
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Verical
1+ parts
$1.010
100+ parts
-
1k+ parts
$0.980
10k+ parts
$0.870
Heilind Electronics
$0.999
$0.984
Interstate Connecting
Mouser Electronics
$1.700
$1.230
$0.920
DigiKey
$1.800
$1.265
$0.998
$0.865
Newark
Master Electronics
$1.040
$1.000
$0.740
Chip1Stop
$1.060
$0.970
Digiode
$0.760
Vyrian
$0.800
Q Components
IBS Electronics
$0.975
$0.725
TME
Corphita
$0.720
Andel Nordic
$6.506
$6.246
EMSNET (Excess)
Perfect Parts
Combination Line Connectors 34062-0036 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Termination Type:
Total No. of Contacts:
34062-0036 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Equipment Transfer 18/Oct/2022
PCN Packaging - Multiple Devices Packaging/Quantity 20/Apr/2020
PCN Other - 34062 Series Housing Mold 20/Apr/2015
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
EU2B-YS303C
Idec
ROTARY SWITCH;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
154719-2
TE Connectivity
TE Connectivity's 154719-2 is a Combination Line Connector with GLASS FILLED POLYAMIDE66 insulator. It operates b/w -40 to 105 °C, UL certified with 94V-2 flammability code. Ideal for cable mounting applications at 115/230VAC mains connector rating.
DTM06-08SA
TE Connectivity's DTM06-08SA is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring UL compliance and polarization key feature.
2319023-2
TE Connectivity's 2319023-2 is a Combination Line Connector with -40 to 125 °C operating temperature range. Featuring UL 94V-0 flammability rating, it has 8 contacts and supports up to 30A signal current. Ideal for applications requiring high-current connections in harsh environments.
DT04-3P-CL06
TE Connectivity's DT04-3P-CL06 is a Combination Line Connector with 3 contacts, rated at 250V and 13A. Made of GLASS FILLED POLYAMIDE, it operates b/w -55 to 125 °C. Ideal for panel mounting applications due to its compact dimensions of 1.698" x 1.595" x 1.25".
DRC26-50S01
TE Connectivity's DRC26-50S01 is a 5-row combination line connector with dimensions of 1.274" x 2.7" x 1.435". It has a rated voltage of 250V, UL flammability code of 94V-0, and can handle up to 7.5A signal current. Ideal for applications requiring a polarized female connector with strain relief mounting for cables in temperatures ranging from -55°C to 125°C.
DT04-4P-L012
TE Connectivity's DT04-4P-L012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and UL flammability code of 94V-0. Ideal for applications requiring a male contact style, crimp termination type, and panel mounting option with strain relief.
DTP06-2S-CE09
TE Connectivity's DTP06-2S-CE09 is a combination line connector with dimensions of 1.867" x 0.883" x 0.711". It has a rated voltage of 200V and can operate in temperatures ranging from -55°C to 125°C. This connector, made of glass-filled polyamide, is suitable for applications requiring a 25A signal current and features a polarized housing with one port.
ATP06-4S-EC01
Amphenol
The Amphenol ATP06-4S-EC01 is a 2-row combination line connector with POLYETHYLENE insulator, rated for 25A signal current. Operating temperature range from -55°C to 125°C. Ideal for cable mounting applications requiring a female contact style plug with 4 contacts.
DT06-12SC-EP06
TE Connectivity's DT06-12SC-EP06 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, ideal for cable mounting applications requiring crimp termination and polarized key.
12015024
Aptiv
Aptiv's 12015024 Combination Line Connector features a Mating Contact Pitch of 0.3", Body Length of 0.949", and Body Width of 0.978". With a rated current of 15A, it is ideal for cable mounting applications requiring a polarized housing and crimp termination. Operating temperatures range from -40°C to 125°C, making it suitable for commercial use in various industries.
1379658-1
TE Connectivity's 1379658-1 is a Combination Line Connector with dimensions of 0.465" x 0.748" x 0.396". Rated for 14V, it operates b/w -40 to 100°C. With UL certification, it has 4 female contacts and is ideal for cable mounting applications.
174046-2
TE Connectivity's 174046-2 is a combination line connector with a mating contact pitch of 0.098 inches. It has a body length of 0.728 inch and insulation resistance of 100000000 ohm. This connector is commonly used in commercial applications due to its reliability and polarization key feature.
1-1718643-1
TE Connectivity 1-1718643-1 is a Combination Line Connector with POLYAMIDE insulator. It has 2 contacts, rated at 25A for signal current. Ideal for applications requiring polarized connectors in temperatures ranging from -40 to 130°C.
3-1437290-8
TE Connectivity 3-1437290-8 is a Combination Line Connector with Mating Contact Pitch of 0.118", Insulation Resistance of 100MΩ, and Rated Voltage of 250V. Ideal for applications requiring a reliable connector with UL certification, operating in temperatures from -40°C to 125°C.
DTP06-2S-E004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Minimum Operating Temperature: -55 Cel;
AT04-12PA-PM05
The Amphenol AT04-12PA-PM05 is a 2x12 Combination Line Connector with POLYETHYLENE insulator. It has a rated current of 13A, operating temperature range from -55 to 125°C, and male contact gender. Ideal for cable and panel mounting applications requiring reliable signal connections in compact spaces.
AT06-08SA
The Amphenol AT06-08SA is a 2-row combination line connector with 8 contacts, rated for 13A signal current. Its dimensions are 1.449" x 0.776" x 1.229", made of polyethylene, suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, ideal for various electronic connections.
967631-1
TE Connectivity's 967631-1 is a Combination Line Connector with dimensions of 0.885" x 1.082" x 1.318". It features 9 contacts, operates b/w -40°C to 140°C, and supports mains connector rating of 115/230VAC. Ideal for board mounting applications requiring male contact gender in a three-row configuration.
D369-R33-NS1
TE Connectivity's D369-R33-NS1 is a Combination Line Connector with 3 contacts, rated at 500V and 5A. With a body size of 0.421" x 0.187" x 0.845", it is designed for applications requiring a polarized, preassembled female connector with crimp termination.
DT06-12SD-B016
TE Connectivity's DT06-12SD-B016 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, crimped female plug with strain relief, this UL-rated connector supports up to 13A signal current across its 12 contacts.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Molex
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved