Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 33012-0002 CONTACT features CRIMP terminal type, FEMALE contact gender, and COMPRESSION contact style. Ideal for 20-16 AWG wires, with a finish thickness of 39. Used in Assembly Products for STRAIGHT mounting applications.
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Elcom Components
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Q Components
VNN
Vyrian
Nova Conductors
Andel Nordic
$4.074
$3.911
Perfect Parts
Argo Parts USA
Netroflash
Continental Prestige Electronics
Authorized Procurement Solutions
Corphita
The thick finish ensures durability and longevity of the product, making it suitable for long-term use.
Crimped terminals provide a secure connection, reducing the risk of loose connections or poor signal transmission.
The contact assembly item ensures that connections are secure and reliable, leading to optimal performance.
Supports a minimum wire size of 20 AWG, allowing for compatibility with a wide range of wire gauges for versatile applications.
With a maximum wire size of 16 AWG, this product is suitable for handling thicker wires while maintaining a secure connection.
The female contact gender ensures compatibility with male connectors, enabling easy and reliable connectivity.
The straight mounting style offers a simple and hassle-free installation process, making it convenient for various applications.
The compression contact style provides a reliable and stable connection, minimizing signal loss and ensuring consistent performance.
Assembly Products 33012-0002 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Connector Accessory Type:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Mounting Style:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
33012-0002 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
New England Semiconductor
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
350689-1
Tyco Electronics Amp
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; Maximum Cable Entry: .1 inch; Design: POWER; Minimum Cable Entry: .04 inch;
1SNK708911R0000
Abb
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Insulator Material: POLYAMIDE;
3505-29B
3m Electronic Products Division
CONNECTOR ACCESSORY; Manufacturer Series: 3505;
1731110058
Molex
The Molex 1731110058 is a BACKSHELL assembly product designed for FCT D-SUB usage. It has a min cable entry of 0.315" and a max cable entry of 0.492". Made of zinc alloy, it can withstand temperatures ranging from -35°C to 100°C.
DWP-125-1/4-KIT3-REFILL
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Construction: DUAL WALL; Maximum Operating Temperature: 110 Cel;
13697408
Delphi Connection Systems
CONNECTOR ACCESSORY; Cable Types: FLRY-B; IEC Conformity: NO; Assembly Item Name: CONTACT; Maximum Cable Entry: .0748 inch; Minimum Cable Entry: .0551 inch;
AT62-14-0122
Amphenol
CONNECTOR ACCESSORY;
DF13-2630SCFA
Hirose Electric
DF13-2630SCFA by Hirose Electric features crimp terminal type, 30-26 AWG wire size compatibility, and 1A rated current. Ideal for applications requiring female contacts with bellowed contact style, such as assembly products with operating temperatures from -35 to 85°C.
1062-12-0166-PS
TE Connectivity's 1062-12-0166-PS is a FEMALE CRIMP CONTACT for CONNECTORS. It supports wire sizes from 14 AWG to 12 AWG with STAMPED design. The RND PIN-SKT style contact is ideal for STRAIGHT mounting in various assembly products.
M80-0130005
Harwin Plc
The Harwin PLC M80-0130005 is a CRIMP terminal with operating temperatures ranging from -55°C to 125°C. It features a rated current of 3A, suitable for wire sizes b/w 28-24 AWG. This FEMALE contact with ROUND PIN-SOCKET design in BRASS material is ideal for SIGNAL applications requiring a STRAIGHT mounting style and 0.043" cable entry.
AWM-4P
42815-0012
Molex 42815-0012 CONTACT features CRIMP terminal for 12-10 AWG wires. Made of COPPER ALLOY, it has 0.209" cable entry and suits FEMALE connectors in STRAIGHT mount. Ideal for applications requiring durable bellowed-type contacts with 30 finish thickness.
205980-1
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: HARDWARE-RETAINING SCREW; Additional Features: INDIVIDUAL KIT; IEC Conformity: NO;
936054-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 120 Cel;
64322-1029
Molex 64322-1029 CONTACT features CRIMP terminal type for 18 AWG wire. Suitable for applications requiring FEMALE contact gender with cable entry from 0.0629 to 0.0748 inch.
0460-204-08141
TE Connectivity's 0460-204-08141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55°C to 125°C, suitable for wire sizes ranging from 10 AWG to 8 AWG. With a rated current of 60 A, it is ideal for high-power applications requiring reliable male contacts.
WM4S
The TE Connectivity WM4S is a wedge item designed for DTM series assemblies. It supports wire sizes up to 0 AWG, with a temperature range of -55°C to 125°C. Made of PBT material, it's ideal for power and signal applications.
66103-4
TE Connectivity's 66103-4 is a crimp terminal for CPC/G and M series connectors. With a finish thickness of 30, it supports wire gauge from 24 to 20 AWG and rated current up to 13A. Ideal for power and signal applications with male contact gender.
5-66506-9
5-66506-9 by Tyco Electronics Amp is a CRIMP terminal with 0.05" min cable entry, suitable for 24-20 AWG wires. Its ROUND PIN-SOCKET contact design and MALE gender make it ideal for straight mounting applications in assembly products.
FSD77-8-DSL2
Panduit
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: YES; Assembly Item Name: FERRULE; Approvals (V): CSA; Maximum Cable Entry: .12 inch;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
33012-2002
The Molex 33012-2002 is a CRIMP CONTACT for 20-18 AWG wires, featuring FEMALE gender and SQUARE PIN-SOCKET style. It is used in Assembly Products for STRAIGHT mounting applications.
33012-3002
The Molex 33012-3002 is a crimp terminal contact for MX150 connectors. It has a temperature range of -40 to 105°C, with wire sizes from 20 to 18 AWG. The female contact has a resistance of 8 mΩ and can handle up to 500V DC, making it ideal for various assembly applications.
33012-2003
CONNECTOR ACCESSORY; Rated Current: 10 A; IEC Conformity: NO; Material: COPPER ALLOY; Maximum Wire Size: 22 AWG; Minimum Operating Temperature: -40 Cel;
33012-3001
CONNECTOR ACCESSORY; Rated Current: 22 A; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 105 Cel; Contact Resistance: 8 mohm; Additional Features: CONTACT FINISH: TIN OVER NICKEL;
33012-3003
Molex 33012-3003 is a female contact for MX150 connector with crimp terminal type. It has a rated current of 10A, contact resistance of 8mohm, and can handle wire sizes up to 22 AWG. Ideal for applications requiring straight mounting style and operating temperatures ranging from -40°C to 105°C.
33011-3002
33012-2001
The Molex 33012-2001 is a CRIMP terminal CONTACT for MX150 CONNECTOR, with operating temperatures from -40 to 105 °C. It supports wire sizes from 16 to 14 AWG, rated at 22A and 500V DC. The FEMALE contact has a resistance of 8 mohm, made of COPPER ALLOY for STRAIGHT mounting applications.
33011-0004
Molex 33011-0004 is a CRIMP CONTACT for 20-16 AWG wires, with MALE gender and BLADE PIN-SKT style. It is used in STRAIGHT mounting applications for assembly products.
33012-3004
33011-0006
Molex 33011-0006 is a CRIMP CONTACT for 22 AWG wire, MALE gender, BLADE PIN-SKT style. Ideal for STRAIGHT mounting applications in Assembly Products.
33012-2004
33011-3001
33011-3003
33012-0001
CONNECTOR ACCESSORY; DIN Conformity: NO; Finish Thickness: 39; Maximum Wire Size: 14 AWG; Terminal Type: CRIMP; Mounting Style: STRAIGHT;
33012-0003
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; Assembly Item Name: CONTACT; Contact Style: COMPRESSION; DIN Conformity: NO; MIL Conformity: NO;
33012-2022
CONNECTOR ACCESSORY; Additional Features: TIN PLATED; Contact Style: BELLOWED TYPE; Finish Thickness: 39; IEC Conformity: NO; Contact Gender: FEMALE;
33012-2023
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Maximum Wire Size: 22 AWG; DIN Conformity: NO; Contact Gender: FEMALE; IEC Conformity: NO;
33012-3022
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Assembly Item Name: CONTACT; Finish Thickness: 39; Maximum Wire Size: 18 AWG; Contact Gender: FEMALE;
33012-3023
CONNECTOR ACCESSORY; Contact Gender: FEMALE; MIL Conformity: NO; Contact Style: BELLOWED TYPE; Assembly Item Name: CONTACT; IEC Conformity: NO;
33.0129
Staeubli Electrical Connectors Ag
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Mounting Style: STRAIGHT; MIL Conformity: NO; Minimum Wire Size: 14 AWG; Maximum Wire Size: 12 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved