Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; DIN Conformance: NO; Mounting Type: BOARD;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Andel Nordic
$3.699
$3.551
Corphita
Headers & Edge Type Connectors 26-60-4092 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
26-60-4092 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
ABS06-32.768KHZ-T
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
National Semiconductor
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
TFM-110-01-S-D-RE1-WT
Samtec
Samtec TFM-110-01-S-D-RE1-WT is a 20-contact board stacking connector with 0.05" pitch, ideal for commercial applications. Features include matte tin termination, liquid crystal polymer insulator, and gold mating contact finish. With a temperature range of -55 to 125°C, it offers reliable signal transmission in various electronic devices.
22-03-2021
Molex
Molex 22-03-2021 is a board connector with mating contact pitch of 0.1", insulation resistance of 50000000000 ohm, and dielectric voltage of 1500VAC. It has a male contact gender, rated current of 4A for signal transmission, and is suitable for commercial applications requiring durable connections on PCBs.
FTSH-107-01-L-DV-K-A
The Samtec FTSH-107-01-L-DV-K-A is a 2-row, 14-contact board connector with Tin-Nickel finish. Operating from -55°C to 125°C, it has a pitch of 1.27mm and UL94V-0 flammability rating. Ideal for surface mount applications in electronics requiring male connectors with straight mounting style.
22-23-2051
The Molex 22-23-2051 is a board connector with 5 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1Gohm, and termination contact finish in matte tin over nickel. It is commonly used in commercial applications for PCB connections due to its rectangular contact pattern and solder termination type.
DM3AT-SF-PEJM5(42)
Hirose Electric
The Hirose Electric DM3AT-SF-PEJM5(42) PCB connector features a mating contact pitch of 0.043", insulation resistance of 1Gohm, and dielectric voltage rating of 500VAC. Ideal for commercial applications, this right-angle male connector has a total of 8 contacts and operates b/w -25°C to 85°C with durability up to 10k cycles.
53261-0471
Molex 53261-0471 is a 4-contact board connector with a mating contact pitch of 0.049 inches. It has a surface mount termination type and is suitable for commercial applications. The connector has a durability of 30 cycles and can operate in temperatures ranging from -40 to 105°C.
71600-006LF
Amphenol Communications Solutions
71600-006LF by Amphenol is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. It features 50B ohm insulation resistance, 1414VAC dielectric voltage, and operates b/w -65 to 105°C. Ideal for commercial applications requiring a durable female receptacle with locking mounting option.
2199230-4
TE Connectivity
TE Connectivity 2199230-4 is a CARD EDGE CONNECTOR with POLYETHYLENE insulator. It has 67 contacts, 0.02" pitch, and operates b/w -40 to 80°C. Ideal for board mounting applications requiring FEMALE compression contacts in a RIGHT ANGLE configuration.
746-010-520-606
Edac
Edac 746-010-520-606 is a 2-row card edge connector with 10 contacts. It has a mating contact pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage of 1500VAC. Ideal for PCB applications requiring high current signal transmission in temperatures ranging from -40 to 105°C.
DF3-4S-2C
DF3-4S-2C by Hirose Electric is a 4-contact board connector with 0.079" pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. It is used in cable mounting applications for signal currents up to 3A, featuring UL94V-0 flammability rating and POLYAMIDE insulator material.
SHR-06V-S-B
J S T Mfg
SHR-06V-S-B by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.039" pitch, suitable for cables with 0.015" min insulation diameter. With UL 94V-0 rating and 500VAC dielectric voltage, it's ideal for applications requiring high insulation resistance up to 100000000 ohm. The FEMALE connector has a rated current of 1A and operates b/w -25°C to +85°C temperature range.
B6B-XH-AM(LF)(SN)
B6B-XH-AM(LF)(SN) by J S T Mfg is a 6-contact male board connector with brass contacts and tin termination finish. It has a terminal pitch of 2.5mm, suitable for straight mounting on boards. Ideal for applications requiring reliable connections in headers & edge type connectors.
B2B-PH-K-S-GW
B2B-PH-K-S-GW by J S T Mfg is a BOARD CONNECTOR with 2 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 2mm and is ideal for applications requiring male contact gender in straight mounting style on boards.
43645-0200
The Molex 43645-0200 is a board connector with a mating contact pitch of 0.312". It features an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications, this female connector has a durability of 30 cycles and uses crimp termination on cables.
S3B-PH-K-S(LF)(SN)
S3B-PH-K-S(LF)(SN) by J S T Mfg is a 3-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C and insulation resistance of 1Gohm. It features brass contacts with tin over copper finish, press-fit termination, and a UL flammability rating of 94V-0.
53261-0271
53261-0271 by Molex is a board connector with 0.049" mating contact pitch, 100000000 ohm insulation resistance, and 39u plating thickness. Ideal for applications requiring a male blade pin-skt contact style in right angle mounting option with POLYAMIDE46 insulator material.
826634-3
TE Connectivity 826634-3 is a 2-row board connector with 0.1" contact pitch, suitable for commercial applications. With insulation resistance of 5G ohm and operating temperature range from -65 to 105°C, it features POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for PCB mounting with right-angle plug style, rated at 5A signal current.
801-43-025-10-012000
Mill-max Mfg
Mill-max Mfg 801-43-025-10-012000 is a 25-contact board connector with matte tin over nickel finish. It has a terminal pitch of 2.54mm and UL flammability rating of 94V-0. Ideal for applications requiring female socket connectors on PCBs.
801-43-025-10-001000
801-43-025-10-001000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, MATTE TIN finish. It has a terminal pitch of 2.54mm and uses SOLDER termination. Ideal for applications requiring FEMALE SOCKET connectors on PCBs.
66506-320LF
Amphenol Communications Solutions' 66506-320LF is a 2-row loaded board connector with 16 contacts. It has a terminal pitch of 2.54mm and is UL Flammability Code 94V-0 rated. This male connector is used for straight mounting on boards, making it suitable for various applications in the electronics industry.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved