Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Color: BLACK; Maximum Operating Temperature (Cel): 105; Maximum Wire Size: 20 AWG;
Median Price
$1.630
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Verical
1+ parts
$1.440
100+ parts
-
1k+ parts
$1.360
10k+ parts
$1.170
Interstate Connecting
$1.535
$1.397
Heilind Electronics
$1.651
$1.326
$1.306
Element14
$1.715
$1.212
$1.124
Newark
$2.100
$1.650
$1.540
Mouser Electronics
$2.530
$2.030
$1.500
$1.340
DigiKey
$2.540
$1.779
$1.474
PEI Genesis
Chip1Stop
$1.450
$1.160
Master Electronics
$1.560
$1.490
Farnell
$1.100
$1.080
TTI
$1.320
$1.240
Vyrian
Digiode
$1.368
TestEquity
IBS Electronics
$1.550
$1.475
$1.163
SPM Sales
Prism Electronics
Corphita
$1.296
Andel Nordic
$39.100
$27.370
Perfect Parts
Headers & Edge Type Connectors 22-55-2242 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Reference Standard:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
22-55-2242 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Cancel Location Change 11/Jul/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
1N4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Grande Electronics
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
Synsemi
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
B4B-ZR-SM4-TF(LF)(SN)
J S T Mfg
B4B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin (Sn) finish. It has a terminal pitch of 1.5mm and UL Flammability Code of 94V-0. Ideal for surface mount applications in headers & edge type connectors.
50-37-5063
Molex
The Molex 50-37-5063 is a board connector with 0.098" mating contact pitch, 0.685" body length, and 1000000000 ohm insulation resistance. It is used in applications requiring a durable female connector with 6 contacts, crimp termination, and POLYBUTYLENE TEREPHTHALATE insulator material.
ZHR-4
ZHR-4 by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.059" pitch, POLYAMIDE66 insulator, and 500VAC dielectric voltage. Ideal for applications requiring -25 to 85 °C temp range, UL94V-0 flammability rating, and signal current up to 1A.
2-640456-5
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Total No. of Contacts: 25; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
S2B-ZR-SM4A-TF(LF)(SN)
S2B-ZR-SM4A-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" pitch, 500VAC Dielectric Withstanding Voltage, and -25 to 85 °C operating range. Ideal for applications requiring POLARIZED HOUSING, RECTANGULAR PCB Contact Pattern, and SURFACE MOUNT Termination Type.
XHP-10
XHP-10 by J S T Mfg is a 10-contact board connector with female crimp termination. It has UL 94V-0 flammability rating and is used in cable mounting applications. This receptacle connector is ideal for various electronic devices requiring secure and reliable connections.
PAP-04V-S
PAP-04V-S by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.079" pitch, 800VAC dielectric voltage, and 3A signal current rating. Ideal for applications requiring POLARIZED HOUSING and CRIMP termination, this UL-rated connector operates b/w -25 to 85 °C temperatures.
640250-5
TE Connectivity
TE Connectivity 640250-5 is a board connector with 0.156" mating contact pitch, 100000000 ohm insulation resistance, and -55 to 105 °C operating temperature range. It has 5 contacts for cable mounting applications, featuring female crimp terminals and glass-filled polyamide insulator material.
746-062-520-601
Edac
Edac 746-062-520-601 is a 62-contact card edge connector with 0.125" pitch, suitable for PCBs. Featuring 3A signal current rating, it has a dielectric strength of 1500VAC and operates b/w -40 to 105°C. Ideal for applications requiring high insulation resistance and UL94V-0 flammability compliance.
B4B-PH-K-S(LF)(SN)(PP)
B4B-PH-K-S(LF)(SN)(PP) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, Tin (Sn) finish, and 2mm terminal pitch. It is used in applications requiring headers & edge type connectors for board mounting with solder termination.
B6B-EH-A(LF)(SN)
B6B-EH-A(LF)(SN) by J S T Mfg is a 6-contact male board connector with 0.098" mating contact pitch, 0.689" body length, and 0.15" body width. It features gold mating contact finish, solder termination type, and polyamide66 insulator material. Ideal for applications requiring a straight mounting style and rectangular contact pattern.
51952-270LF
AMPHENOL ICC
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
35362-0450
Molex 35362-0450 is a board connector with 4 contacts, featuring 0.079" mating pitch and 0.406" body length. It uses matte tin finish, brass contact material, and polyamide insulator. Ideal for commercial applications requiring reliable rectangular PCB contact patterns.
52207-1160
The Molex 52207-1160 is a FFC/FPC connector with 11 contacts, mating pitch of 0.039", and tin termination finish. It operates b/w -30 to 85°C, suitable for board mounting in applications requiring a right angle receptacle design.
S3B-XH-A-1
S3B-XH-A-1 by J S T Mfg is a 3-contact board connector with tin finish, brass contacts, and UL 94V-0 flammability rating. It is ideal for right-angle mounting on boards, featuring a terminal pitch of 2.5mm and solder termination. Perfect for applications requiring reliable male connectors in compact spaces.
MM70-314B1-2-R300
Japan Aviation Electronics Industry
MM70-314B1-2-R300 by Japan Aviation Electronics features a mating contact pitch of 0.02", insulator made of glass-filled liquid crystal polymer, and total 314 contacts. It is a card edge connector with UL flammability code 94V-0, suitable for board mounting applications requiring right angle mounting style and surface mount termination type.
SM03B-SRSS-TB(LF)(SN)
J S T Mfg SM03B-SRSS-TB(LF)(SN) is a 3-contact board connector with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCB applications requiring male contact, surface mount termination, and right-angle mounting with locking option.
BM04B-GHS-TBT(LF)(SN)
BM04B-GHS-TBT(LF)(SN) by J S T Mfg is a 4-contact BOARD CONNECTOR with 0.049" pitch, POLYAMIDE9T insulator, and 500VAC dielectric voltage. Ideal for applications requiring a male connector with surface mount termination, operating b/w -25 to 85 °C, UL-rated for flammability.
FTSH-105-01-L-DV-007-K
Samtec
Samtec's FTSH-105-01-L-DV-007-K is a 2-row, 9-contact board connector with a contact pitch of 0.05". It features liquid crystal polymer insulator material, tin termination finish, and operates b/w -55°C to 125°C. Ideal for applications requiring high signal current capacity and reliable surface mount connections.
26-60-4020
The Molex 26-60-4020 is a board connector with 0.156" mating contact pitch, suitable for commercial applications. Featuring a 7A signal current rating, it has a durable design with 25 cycles of use and operates b/w 0°C to 75°C temperature range. The connector uses tin finish on brass contacts and offers high insulation resistance of 1Gohm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved