Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 22-28-4100 is a board connector with 10 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1Gohm, and termination finish in bright tin over nickel. It has a rectangular PCB contact pattern and is suitable for commercial applications requiring durability up to 25 cycles.
Median Price
$0.281
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Newark
1+ parts
$0.071
100+ parts
1k+ parts
10k+ parts
-
Interstate Connecting
$0.240
Heilind Electronics
$0.258
Adafruit Industries
$0.269
$0.255
Verical
$0.280
$0.266
Arrow
$0.415
$0.271
$0.218
DigiKey
$0.420
$0.278
$0.179
Mouser Electronics
$0.570
$0.400
$0.338
TTI
$0.297
$0.205
Master Electronics
$0.282
$0.268
PEI Genesis
Chip1Stop
$0.296
$0.243
Powell Electronics
Farnell
$0.236
Digiode
$0.168
Global Solutions Electronics Company
$0.170
TestEquity
Nova Conductors
$0.351
Vyrian
IBS Electronics
$0.261
$0.230
TME
$0.277
$0.256
Prism Electronics
VNN
Inventory MP
Bristol Electronics
PC Components Company LLC
Bisco
A&K Electronics
A2Z Electronics, Inc.
Elcom Components
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Semicontronic
$0.150
$0.146
Corphita
$0.159
Advanced Electronics
Argo Parts USA
$0.321
$0.311
Aranea Global
$0.344
$0.330
Continental Prestige Electronics
$0.530
$0.307
Aztec Data Supply Inc.
$1.156
Perfect Parts
Assy Fe
Having a small mating contact pitch allows for efficient and compact connections on the board, making this product suitable for applications where space is limited.
High insulation resistance ensures reliable and secure connections, reducing the risk of electrical failures or short circuits.
A thick plating thickness provides durability and corrosion resistance, ensuring the connectors have a long lifespan and perform well in various environments.
This connector type is specifically designed for board-to-board connections, making it a perfect choice for applications that require secure and stable connections between circuit boards.
With a high UL flammability rating, this product is fire-resistant and safe to use in applications where fire safety is a priority.
Having multiple contacts allows for more connections to be made, providing flexibility and versatility in the types of devices or components that can be connected.
Designed for board mounting, this product can be easily integrated into circuit boards, ensuring a secure and stable connection.
Solder termination provides a strong and reliable connection between the connector and the circuit board, ensuring a secure and long-lasting connection.
Being rated for commercial use means that this product meets industry standards for reliability and performance, making it a dependable choice for various applications.
Headers & Edge Type Connectors 22-28-4100 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
22-28-4100 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
1N4148W-T
Rectron
Zowie Technology
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semiconductor Technology
DT06-3S-P006
TE Connectivity
TE Connectivity's DT06-3S-P006 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and measures 1.228" x 0.737" x 0.94".
22-01-3037
Molex
The Molex 22-01-3037 is a board connector with 3 contacts, rated at 4A signal current. Featuring a mating contact pitch of 0.1", it has a durable design with removable contact blocks and polarization key for easy assembly. With an insulation resistance of 1Gohm and operating temperature range from -40 to 105°C, it is ideal for commercial applications requiring reliable connections.
104168-1620
PCB CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
35572-0400
Molex 35572-0400 is a 4-contact board connector with 0.098" pitch, suitable for commercial applications. With insulation resistance of 1Gohm and operating temp range of -40 to 105°C, it features tin finish contacts and UL94V-0 flammability rating. Ideal for cable mounting, this polarized housing connector offers reliable performance in various electronic systems.
B03B-PASK-1(LF)(SN)
J S T Mfg
B03B-PASK-1(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 3A signal current rating, 0.079" contact pitch, and 800VAC dielectric voltage. Ideal for board mounting applications, it features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and tin over copper mating finish. Operating b/w -25 to 85 °C, this UL-rated connector offers high insulation resistance of 1000000000 ohm.
1-1658621-1
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e3; Mating Contact Finish: GOLD (15) OVER NICKEL (50)/GOLD FLASH (15) OVER PALLADIUM NICKEL (15); Mixed Contacts: NO;
VHR-2N-R
BOARD CONNECTOR;
FTSH-105-01-L-DV-P-TR
Samtec
Samtec's FTSH-105-01-L-DV-P-TR is a 2-row, 10-contact board connector with a contact pitch of 1.27mm. Featuring gold mating contacts over nickel, it has a temperature range of -55 to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
831-43-025-10-001000
Mill-max Mfg
831-43-025-10-001000 by Mill-max Mfg is a BOARD CONNECTOR with 25 contacts, TIN finish, and 2mm pitch. Ideal for board-to-board connections in various electronic applications due to its FEMALE contact gender, SOLDER termination, and STRAIGHT mounting style.
640456-4
TE Connectivity 640456-4 is a board connector with 0.1" pitch, suitable for commercial applications. It features TIN finish, 5A signal current rating, and GLASS FILLED POLYESTER insulator material. Ideal for use in electronics requiring a male contact gender and straight mounting style.
22-03-5045
The Molex 22-03-5045 is a board connector with 4 contacts, featuring a mating contact pitch of 0.098", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
61301021121
Wuerth Elektronik & Kg
61301021121 by Wurth Elektronik is a Board Connector with 10 contacts, rated at 3A signal current. It features gold over nickel termination finish, polybutylene terephthalate insulator material, and copper alloy contact material. Ideal for commercial applications requiring a reliable connection on PCBs with a mating contact pitch of 0.1 inch.
FTSH-105-01-F-DV-K
Samtec's FTSH-105-01-F-DV-K is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring liquid crystal polymer insulator and matte tin over nickel termination, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring reliable surface mount connections on PCBs.
70107-0002
Molex 70107-0002 is a board connector with 0.1" pitch, GLASS FILLED POLYESTER insulator, and -40 to 105°C operating range. Ideal for cable mounting applications requiring a polarized rib key, UL94V-0 flammability rating, and SQ PIN-SKT male contacts.
53261-0471
Molex 53261-0471 is a 4-contact board connector with a mating contact pitch of 0.049 inches. It has a surface mount termination type and is suitable for commercial applications. The connector has a durability of 30 cycles and can operate in temperatures ranging from -40 to 105°C.
DF3A-4P-2DSA
Hirose Electric
DF3A-4P-2DSA by Hirose Electric is a 4-contact board connector with 0.079" pitch, suitable for commercial applications. It features a dielectric voltage of 650VAC, insulation resistance of 1Gohm, and operates b/w -30 to 85°C. Ideal for PCB mounting with solder termination and UL94V-0 flammability rating.
22-28-4037
Molex 22-28-4037 is a board connector with 0.1" pitch, 3 contacts, and 4A signal rating. It features glass-filled polyamide insulation, tin contact finish, and operates b/w 0-75°C. Ideal for commercial applications requiring reliable connections in electronic devices.
5-534998-6
TE Connectivity's 5-534998-6 board connector features insulation resistance of 5000000000 ohm, dielectric voltage of 750VAC, and tin finish with nickel barrier. With UL flammability rating of 94V-0, it is ideal for applications requiring a rated current of 2A in temperatures ranging from -65 to 125 °C.
61300511121
61300511121 by Wurth Elektronik is a BOARD CONNECTOR with 5 contacts, rated for 3A signal current. Featuring a mating contact pitch of 0.1", it has gold over nickel termination finish and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable connections on PCBs.
504077-1891
Molex 504077-1891 is a PCB connector with 0.043" contact pitch, 8u plating thickness, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features liquid crystal polymer insulator material and operates b/w -40 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
22-28-4033
Molex 22-28-4033 is a board connector with 0.1" pitch, suitable for commercial applications. It features 3 male contacts with matte tin finish, rated at 4A signal current. With a durability of 25 cycles and UL94V-0 flammability rating, it offers reliable performance in temperatures ranging from 0 to 75°C.
22-28-4020
Molex 22-28-4020 is a board connector with 0.1" pitch, ideal for commercial applications. Featuring bright tin finish, it offers 25 cycles durability and 10 mohm contact resistance. With a rectangular PCB contact pattern and solder termination, this male connector has a total of 2 contacts in a black insulator body.
22-28-4023
The Molex 22-28-4023 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm, it offers reliable signal transmission at up to 4A current. With a durable design rated for 25 cycles, this male connector has a solder termination type and matte tin finish over nickel for optimal performance.
22-28-5123
The Molex 22-28-5123 is a board connector with 12 contacts, rated at 4A signal current. It features a mating contact pitch of 0.1", insulation resistance of 50Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications requiring durable connectors with solder termination and rectangular PCB contact pattern.
22-28-4034
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
22-28-4060
The Molex 22-28-4060 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1Gohm. It has a body length of 0.6", termination finish in Tin (Sn) with Nickel (Ni) barrier, and insulator material made of glass-filled polyamide. Ideal for commercial applications requiring durable connectors with reliable performance.
22-28-4053
22-28-4030
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Terminal Pitch (mm): 2.54;
22-28-4025
22-28-4021
22-28-5052
The Molex 22-28-5052 is a board connector with 0.1" mating contact pitch, suitable for commercial applications. It features a dielectric voltage of 1500VAC and insulation resistance of 50Gohm, making it reliable for signal currents up to 4A. With a durable design and solder termination, this male receptacle connector is ideal for PCB mounting in various electronic devices.
22-28-4040
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body or Shell Style: RECEPTACLE;
22-28-4050
22-28-4050 by Molex is a board connector with 5 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1G ohm. It has a durable design with bright tin over nickel finish, suitable for commercial applications requiring reliable connections on PCBs.
22-28-4346
Molex 22-28-4346 is a board connector with 34 contacts, featuring a mating contact pitch of 0.1" and insulation resistance of 1G ohm. Ideal for commercial applications, it has a rectangular PCB contact pattern and matte tin over nickel termination finish.
22-28-4041
22-28-4083
22-28-0200
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; No. of PCB Rows: 1;
22-28-4064
22-28-4185
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved