Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
Median Price
$2.165
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Master Electronics
1+ parts
$1.848
100+ parts
-
1k+ parts
10k+ parts
$1.470
Newark
$2.040
$1.610
$1.530
Farnell
$2.180
$1.750
DigiKey
$2.190
$1.580
$1.343
$1.259
Mouser Electronics
$2.260
$1.590
$1.510
Element14
$3.660
$3.030
TTI
$1.600
$1.540
Chip1Stop
$2.150
Digiode
$1.244
Vyrian
$1.310
TestEquity
$2.090
IBS Electronics
$2.041
Corphita
$1.179
Power Connectors 2147532023 attributes and parameters. Explore more Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
2147532023 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3303C
Idec
ROTARY SWITCH;
Allegro MicroSystems
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
Comchip Technology
43045-0220
Molex
Molex 43045-0220 is a rectangular power connector with 2 contacts, made of LCP insulator and brass contact material. It has an insulation resistance of 1 Gohm, dielectric voltage of 1000VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL certification.
39-30-1120
Molex 39-30-1120 is a rectangular power connector with 12 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.
1-641737-1
TE Connectivity 1-641737-1 is a power connector with body dimensions of 1" x 0.345" x 0.484". It has an insulation resistance of 500M ohm, rated current of 12A, and operates b/w -55 to 105°C. Ideal for board mounting applications, it features a polarized design with white insulator color and POLYAMIDE material.
75757-1261
Molex 75757-1261 is a RECTANGULAR POWER CONNECTOR with Matte Tin (Sn) finish. It has 12 contacts made of COPPER ALLOY, UL94V-0 rated. Ideal for BOARD mounting, SOLDER termination, and male contact gender in power applications.
39-29-0023
Molex 39-29-0023 is a rectangular power connector with 2 contacts, made of brass and polyamide66. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
43640-0300
The Molex 43640-0300 is a rectangular power connector with a mating contact pitch of 0.118". It has an insulation resistance of 1Gohm and operates b/w -40 to 105°C. Ideal for commercial applications, it features a polarized housing, UL flammability rating, and can handle up to 5A signal current.
794821-1
TE Connectivity's 794821-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator, rated at 600V and operating temperature range of -20 to 105 °C. It has 8 contacts, suitable for cable mounting applications in power systems with UL certification.
1381G1
Anderson Power Products
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; DIN Conformance: NO; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
43640-0501
The Molex 43640-0501 is a rectangular power connector with 5A signal current rating. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for commercial applications, this connector offers durability up to 30 cycles and UL flammability rating of 94V-0.
1-350777-1
TE Connectivity 1-350777-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 2 contacts, operates b/w -55 to 105°C, and UL94V-0 flammability rating. Ideal for power applications requiring CRIMP termination on CABLE mountings.
MPSC-02-16-02-01-03-T-RA-SD
Samtec
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
31067-1010
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
39-28-8160
The Molex 39-28-8160 is a rectangular power connector with 16 contacts, made of brass and tin/copper finish. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability meeting CSA, TUV, UL standards.
1954289-2
TE Connectivity's 1954289-2 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates in temperatures ranging from -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.
3-794617-8
TE Connectivity's 3-794617-8 is a RECTANGULAR POWER CONNECTOR with 8 contacts, rated at 250V and 5A. Made of POLYAMIDE66, it operates b/w -40 to 105 °C. Ideal for power applications requiring a compact design with crimp termination and UL certification.
1723163208
Molex 1723163208 Power Connector features Liquid Crystal Polymer insulator, -40 to 120°C operating temp range, and UL 94V-0 flammability rating. With 8 contacts, it is ideal for board mounting applications requiring a male SQ PIN-SKT contact style with 11A signal current capacity.
1722581104
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
39-29-9025
The Molex 39-29-9025 is a rectangular power connector with 2 rows, rated at 9A signal current. It features a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. Ideal for board mounting applications with a temperature range from -40 to +105°C.
39-01-2240
Molex 39-01-2240 is a RECTANGULAR POWER CONNECTOR with 24 contacts, POLYAMIDE66 insulator, and 1500VAC Dielectric Withstanding Voltage. It has a temperature range of -40 to 105 °C and is used in CABLE mounting applications for power connections requiring high insulation resistance.
428194213
Molex 428194213 Power Connector features 1.724" body length, 1000000000 ohm insulation resistance, and 2200VAC dielectric voltage. Ideal for commercial applications with -40 to 105°C operating range, UL-rated with 4 contacts for signal current up to 50A on a single connector board.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved