Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Median Price
$3.320
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Newark
1+ parts
$0.767
100+ parts
1k+ parts
10k+ parts
-
Farnell
$2.480
$1.780
Mouser Electronics
$5.080
$3.730
$3.210
$2.780
Element14
$6.640
$5.310
$4.900
Master Electronics
$3.450
$3.340
Chip1Stop
$3.520
$3.180
Verical
$3.300
Powell Electronics
$3.200
Distrelec
TTI
$3.310
Digiode
$0.729
Vyrian
TestEquity
$3.280
IBS Electronics
$3.175
TME
$4.654
$4.478
Corphita
$0.690
Power Connectors 2147512062 attributes and parameters. Explore more Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
2147512062 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
Changzhou Starsea Electronics
Hy Electronic
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
Sangdest Microelectronics (Nanjing)
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Zowie Technology
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
1-917809-2
TE Connectivity
TE Connectivity 1-917809-2 is a rectangular power connector with 4 contacts, made of glass-filled polyester. It has a body size of 1.85"x1.051"x1.85" and operates b/w -55°C to 105°C. Ideal for commercial applications requiring high insulation resistance (1000000000 ohm) and male crimp termination in a panel mount setup.
76825-0002
Molex
Molex 76825-0002 is a RECTANGULAR POWER CONNECTOR with 2 contacts, Tin finish, and LIQUID CRYSTAL POLYMER insulator. Ideal for BOARD mounting applications requiring MALE contact gender and UL 94V-0 flammability rating.
39-29-1067
The Molex 39-29-1067 is a rectangular power connector with 6 contacts, featuring a dielectric voltage of 2200VAC and insulation resistance of 1Gohm. With a temperature range from -40 to 105°C, it is ideal for board mounting applications requiring durability and reliability in commercial settings.
43650-0226
The Molex 43650-0226 is a rectangular power connector with 2 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. Ideal for board mounting applications, it has a temperature range from -40 to 105°C and meets UL flammability code standards.
1720420201
RECTANGULAR POWER CONNECTOR; Contact Material: COPPER ALLOY; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN;
03-06-1042
Molex 03-06-1042 is a rectangular power connector with 0.63"x.2"x.78" dimensions, made of POLYAMIDE. It has 4 contacts arranged in S0P4, UL 94V-2 rated for panel mounting via crimp termination. Ideal for commercial applications requiring reliable female receptacle connectors with locking mounting option.
43650-0415
The Molex 43650-0415 Power Connector features a mating contact pitch of 0.118", insulation resistance of 1Gohm, and dielectric voltage of 1500VAC. Ideal for board mounting applications with a temperature range from -40 to +105°C, this connector offers durability with 30 cycles and reliability for commercial use.
556879-6
TE Connectivity's 556879-6 is a rectangular power connector with 6 contacts, rated at 600V and 35A. Made of polycarbonate, it offers high insulation resistance of 5G ohm. Ideal for commercial applications, this connector has a durability of 100 cycles and operates in temperatures ranging from 0 to 105°C.
87427-2242
Molex 87427-2242 is a rectangular power connector with 22 contacts, rated at 9A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and UL94V-0 flammability rating.
2004561212
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
794186-1
TE Connectivity 794186-1 is a power connector with 0.844" body length, rated for 600V and -55 to 105°C operating temperature. It has POLYAMIDE insulation, UL94V-0 flammability rating, and 9.5A signal current capacity. Ideal for commercial applications requiring durable female connectors with crimp termination on cables.
43650-0412
The Molex 43650-0412 is a rectangular power connector with a mating contact pitch of 0.118 inches and a body length of 0.616 inch. It has an insulation resistance of 1,000,000,000 ohm and is commonly used in board mounting applications for power connections.
39-29-1047
The Molex 39-29-1047 is a rectangular power connector with 4 contacts, made of brass and polyamide insulator. It has a dielectric voltage of 2200VAC, operates b/w -40 to 105°C, and offers durability for up to 30 cycles. Ideal for board mounting applications requiring reliable commercial-grade power connections.
IPBT-105-H2-T-D-GP
Samtec
The Samtec IPBT-105-H2-T-D-GP is a rectangular power connector with liquid crystal polymer insulator. It has 10 contacts, matte tin over nickel finish, and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings.
39-30-1020
The Molex 39-30-1020 is a rectangular power connector with 2 contacts, featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. It is used in board mounting applications, with a temperature range from -40 to 105°C. The connector has a durable design with brass contacts and polyamide66 insulator material.
105310-1204
Molex 105310-1204 Power Connector features Liquid Crystal Polymer insulator, rated for 7.5A signal current. With UL94V-0 flammability rating, it operates from -40 to 115°C. Ideal for board mounting applications with male SQ pin-skt contacts.
43020-0401
The Molex 43020-0401 is a rectangular power connector with 4 contacts, made of nylon insulator material. It has a temperature range from -40 to 105°C and UL flammability rating of 94V-0. Ideal for commercial applications, it features crimp termination and straight mounting with locking latch option.
39-01-3129
Molex 39-01-3129 is a rectangular power connector with 12 contacts, rated at 9A signal current. Featuring a mating contact pitch of 0.165", it has an insulation resistance of 1G ohm and can withstand up to 1500VAC. Ideal for commercial applications, this male plug connector offers durability with a min withdrawal force of 3.1136N and operates b/w -40°C to +105°C temperature range.
2064610200
RECTANGULAR POWER CONNECTOR;
39-01-3022
Molex 39-01-3022 is a rectangular power connector with 2 rows, 2 contacts, and POLYAMIDE66 insulator. It has a 0.291" x 0.418" x 0.772" body size, UL94V-2 flammability rating, and female contact gender. Ideal for commercial applications requiring crimp termination on cables.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved