Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
Median Price
$1.710
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.936
100+ parts
-
1k+ parts
$0.763
10k+ parts
Distrelec
$1.565
Element14
$1.224
Arrow
$1.737
$1.161
$1.023
$0.927
Master Electronics
$1.749
$1.270
$1.150
DigiKey
$1.810
$1.306
$1.166
$0.983
Farnell
$1.872
$1.226
$0.956
Newark
$1.960
Chip1Stop
$0.860
Verical
$1.165
$1.026
$0.930
TTI
$1.310
$0.980
Vyrian
$0.732
Digiode
$0.978
IBS Electronics
$1.136
VNN
Nova Conductors
Corphita
$0.926
Andel Nordic
$1.582
$1.519
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Power Connectors 2125280400 attributes and parameters. Explore more Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
2125280400 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1552200168
Molex
WIRE AND CABLE;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
Sangdest Microelectronics (Nanjing)
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitachi
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
Eic Semiconductor
Rugao Dachang Electronic
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
992G2
Anderson Power Products
992G2 by Anderson Power Products is a RECTANGULAR POWER CONNECTOR with 2 contacts, HERMAPHRODITIC gender, and UL 94V-0 flammability rating. It features an empty shell and cable mounting type. Ideal for power applications requiring reliable connections in harsh environments.
1-794617-6
TE Connectivity
TE Connectivity 1-794617-6 is a Power Connector with 16 contacts, rated at 250V and 5A. Featuring POLYAMIDE66 insulator material, it has a mating contact pitch of 0.118" and operates b/w -40 to 105°C. Ideal for commercial applications requiring reliable power connections.
43045-0812
The Molex 43045-0812 is a rectangular power connector with 8 contacts, featuring bright tin over nickel termination finish. With a mating contact pitch of 0.118", it offers high insulation resistance of 1Gohm and withstands up to 1500VAC. Ideal for board mounting applications in commercial settings, this connector has a durability of 30 cycles and operates b/w -40°C to 105°C temperature range.
2077820004
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
2002411128
1-1123722-7
TE Connectivity 1-1123722-7 is a RECTANGULAR POWER CONNECTOR with 7 contacts, rated at 8A and 250V. Featuring POLYAMIDE66 insulation material, it has a dielectric voltage of 1500VAC and operates b/w -25 to 105°C. Ideal for board mounting applications requiring high durability and reliability in commercial settings.
39-30-0100
Molex 39-30-0100 is a rectangular power connector with 10 contacts, male gender, and solder termination. It has a body length of 0.87", width of 0.38", and depth of 0.72". With insulation resistance of 1Gohm, dielectric voltage of 1500VAC, and operating temp range from -40 to 105°C, it's ideal for board mounting applications requiring durability over 30 cycles.
39-01-4040
The Molex 39-01-4040 is a rectangular power connector with 4 contacts, suitable for commercial applications. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for cable and panel mounting, it has a durable design with a min withdrawal force of 0.5004N and polarization key for secure connections.
76825-0002
Molex 76825-0002 is a RECTANGULAR POWER CONNECTOR with 2 contacts, Tin finish, and LIQUID CRYSTAL POLYMER insulator. Ideal for BOARD mounting applications requiring MALE contact gender and UL 94V-0 flammability rating.
10-10-1033
The Molex 10-10-1033 is a rectangular power connector with 3 contacts, rated at 7A. It features a mating contact pitch of 0.2", insulation resistance of 500000000000 ohm, and dielectric voltage of 1500VDC. Ideal for board mounting applications in commercial settings due to its durability and reliability.
DF22R-2P-7.92DSA(53)
Hirose Electric
DF22R-2P-7.92DSA(53) by Hirose Electric is a POWER CONNECTOR with GLASS FILLED POLYAMIDE insulator, 2 contacts, and 0.678" x 0.49" x 0.713" dimensions. It operates b/w -55 to 85°C, UL94V-0 rated, suitable for BOARD mounting with SOLDER termination.
1327
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; Termination Type: CRIMP; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature (Cel): 105;
36783-1201
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: BRASS; Termination Contact Finish: MATTE TIN OVER NICKEL;
10-84-5020
The Molex 10-84-5020 is a rectangular power connector with 2 contacts, featuring bright tin termination finish and polyester insulator material. It has an insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
VLR-04VN
J S T Mfg
VLR-04VN by J S T Mfg is a POWER CONNECTOR with POLYAMIDE66 insulator material. It features 4 contacts, CRIMP termination, and FEMALE contact gender. Ideal for applications requiring reliable power connections in various industries.
93445-3101
The Molex 93445-3101 is a rectangular power connector with dimensions of 0.816" x 0.807" x 2.34". It has an insulator made of glass-filled polyamide and can operate b/w -55°C to 125°C. With a rated current of 13A, it is ideal for applications requiring a female receptacle connector with crimp termination on cables.
39-28-1143
Molex 39-28-1143 is a rectangular power connector with 14 contacts, made of brass and tin/copper finish. It has an insulation resistance of 1Gohm, dielectric voltage of 2200VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications due to its durability, reliability, and UL flammability rating.
39-28-8100
The Molex 39-28-8100 is a rectangular power connector with 10 contacts, made of brass and tin/copper finish. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability.
1-480704-0
TE Connectivity 1-480704-0 is a Power Connector with dimensions of 1.08" x 0.55" x 1.08". It has POLYAMIDE insulator, operates b/w -55 to 105°C, and features 6 contacts for cable mounting applications.
43650-0412
The Molex 43650-0412 is a rectangular power connector with a mating contact pitch of 0.118 inches and a body length of 0.616 inch. It has an insulation resistance of 1,000,000,000 ohm and is commonly used in board mounting applications for power connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2125201004
RECTANGULAR POWER CONNECTOR;
212514-1004
2125280200
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
212514-1006
2125281000
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
2125280201
2125280600
2125280800
2125280801
2125281001
2125281200
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
2125281400
2125281600
2125281601
2125282000
2125282001
2125282200
2125282400
2125280401
POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Termination Type: SOLDER; Mounting Type: BOARD;
2125280601
Molex 2125280601 power connector has dimensions of 0.39" x 0.35" x 0.48". With a rated current of 12.5A, it operates b/w -40°C to 105°C. This male connector with SQ pin-skt contact style is ideal for board mounting applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved