Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 204223-0004 is a Combination Line Connector with dimensions of 0.603" x 0.413" x 1.545". Made of POLYAMIDE, it has 4 contacts and UL 94V-0 flammability rating. Ideal for cable mounting, this male plug connector is commonly used in various electronic applications.
Median Price
$1.724
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$0.960
100+ parts
-
1k+ parts
10k+ parts
Waytek Inc.
$1.110
$0.980
$0.936
Interstate Connecting
$1.404
Mouser Electronics
$2.360
$1.770
$1.420
$1.380
DigiKey
$2.460
$1.775
$1.509
$1.414
Farnell
$2.570
$1.800
$1.280
RS Americas
$2.620
$1.970
$1.570
Newark
$3.040
$2.440
$1.830
Element14
$3.220
$2.380
$2.160
Verical
$1.353
$1.303
Powell Electronics
$1.470
$1.390
$1.360
TTI
$1.320
$1.220
Chip1Stop
$1.400
Distrelec
Digiode
$1.108
Nova Conductors
$1.514
VNN
IBS Electronics
$1.585
$1.501
$1.290
Vyrian
Corphita
$1.049
Argo Parts USA
Continental Prestige Electronics
$1.484
Allen Electronics Distributors
$1.590
Aztec Data Supply Inc.
$4.502
Andel Nordic
$41.670
$29.172
Perfect Parts
RC Electronics
$1.530
$1.440
$1.410
Authorized Procurement Solutions
Assy Fe
Kepictronics
The compact body length makes this connector suitable for space-constrained applications.
The slim body width allows for easy installation in tight areas or closely-packed designs.
The ample body depth accommodates multiple contacts for enhanced connectivity.
The use of durable and heat-resistant polyamide insulator ensures reliable performance in various environments.
This versatile connector allows for multiple types of connections in one compact unit, simplifying installations.
The UL 94V-0 rating indicates a high level of fire resistance, enhancing safety in applications.
Being UL-listed ensures that this connector meets high industry standards for quality and performance.
With 4 contacts, this connector offers possibilities for complex interconnections in a single unit.
The cable mounting type provides flexibility in installation and allows for easy connection to various devices.
The crimp termination type offers a secure and stable connection, ideal for demanding applications.
The male contact gender is common and compatible with a wide range of mating connectors.
The plug-style body or shell design enables easy and secure connections with corresponding receptacles.
Combination Line Connectors 204223-0004 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Option:
Reference Standard:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
204223-0004 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Location 24/May/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
Lite-on Semiconductor
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
Good-ark Electronics
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1N4148WS
Tak Cheong Electronics Holdings
AT04-2P-SR02BLK
Amphenol
The Amphenol AT04-2P-SR02BLK is a combination line connector with 2 contacts, rated for 13A signal current. Its compact dimensions of 0.673" x 0.669" x 2.193" make it suitable for cable mounting applications. With an operating temperature range of -55°C to 125°C, this connector features a male contact gender and receptacle body style.
282088-1
TE Connectivity's 282088-1 is a Combination Line Connector with dimensions of 1.146" x 0.366" x 1.268". It has a rated voltage of 24V, GLASS FILLED POLYAMIDE insulator, and operates b/w -40°C to 125°C. Ideal for applications requiring a polarized housing, it offers a rated current of 14A and features a total of 4 contacts for cable mounting.
1-776087-1
TE Connectivity 1-776087-1 is a Combination Line Connector with dimensions 2.394" x 1.498" x 1.492". It has 23 contacts, rated at 17A, suitable for board mounting applications at temperatures ranging from -40°C to 125°C. The connector features POLYBUTYLENE TEREPHTHALATE insulator material and UL94V-0 flammability code, making it ideal for various electronic systems requiring a polarized, right-angle male terminal connection.
DT06-12SA-CE12
The TE Connectivity DT06-12SA-CE12 is a combination line connector with 12 contacts, rated for 250V and 13A. It features a body size of 1.701" x 0.82" x 1.597", suitable for applications requiring a max operating temperature of 125°C and min of -55°C. Ideal for cable mounting with UL certification and polarization key for secure connections.
B04B-JWPF-SK-R(LF)(SN)
J S T Mfg
B04B-JWPF-SK-R(LF)(SN) by J S T Mfg is a Combination Line Connector with 4 contacts, made of copper alloy with TIN finish. It uses POLYBUTYLENE TEREPHTHALATE insulator material and has a waterproof option for board mounting applications. UL Flammability Code: 94V-0.
HC18B-S32
The Amphenol HC18B-S32 is a 32-contact combination line connector with a body size of 1.969" x 1.661" x 1.374". Rated for 5A signal current, UL94V-0 flammability, and operating temperatures from -40°C to 125°C. Ideal for cable mounting applications requiring female contacts in a plug shell style with round pin/socket contact design.
SMS3P3
Souriau-sunbank Connection Technologies
SMS3P3 by Souriau-sunbank is a 0.232" wide, 0.984" deep combination line connector with 3 contacts rated at 7.5A. Made of glass-filled polyethylene, it's a female plug for cable mounting with crimp termination. Ideal for applications requiring UL94V-0 flammability code compliance and compact design.
DT04-2P-E004
TE Connectivity's DT04-2P-E004 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
33472-1601
Molex
Molex 33472-1601 is a Combination Line Connector with 0.138" pitch, suitable for commercial applications. Featuring 16 contacts, rated at 22A signal current, it has a temperature range of -40 to 125°C. This female connector uses crimp termination and has a rectangular contact pattern for secure cable mounting.
15326842
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: STRAIGHT;
DT06-12SC-EP06
TE Connectivity's DT06-12SC-EP06 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, ideal for cable mounting applications requiring crimp termination and polarized key.
15397577
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Empty Shell: NO; Mounting Type: CABLE;
MX23A26NF1
Japan Aviation Electronics Industry
MX23A26NF1 by Japan Aviation Electronics Industry is a Combination Line Connector with dimensions of 1.889" x 0.72" x 1.507". It features 26 contacts made of brass with TIN finish, suitable for board mounting applications. The connector is waterproof and uses solder termination, ideal for male contact gender in various electronic systems.
AT4PS-CKIT
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
12020832
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: COMPATIBLE CONTACTS: 12124581; 12124580; 15408312; 12020801; Mixed Contacts: NO; Insulator Material: POLYAMIDE6;
10763414
Aptiv
COMBINATION LINE CONNECTOR;
AT04-2P-BLU
The Amphenol AT04-2P-BLU is a combination line connector with 2 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-2S-BLU connectors using crimp termination.
4-1437290-0
TE Connectivity 4-1437290-0 is a Combination Line Connector with 34 contacts, rated at 250V. Featuring a Mating Contact Pitch of 0.118", it has an Insulation Resistance of 100MΩ and operates b/w -40°C to 125°C. Ideal for commercial applications requiring reliable cable connections with IDC termination.
1-1823640-1
TE Connectivity's 1-1823640-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It operates b/w -40 to 85°C, suitable for mains applications up to 115/230VAC. This polarized connector has a terminal pitch of 3.1mm and features an empty shell design.
1-770968-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Manufacturer Series: 770968; UL Flammability Code: 94V-0;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
204223-0008
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; No. of Rows Loaded: 1;
204220-0008
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; UL Flammability Code: 94V-0; Body Width: .52 inch;
204223-0006
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Termination Type: CRIMP; Reference Standard: UL;
204223-0002
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Insulator Material: POLYAMIDE; Mounting Type: CABLE;
2042200002
Molex 2042200002 is a Combination Line Connector with 0.543"x.52"x1.075" dimensions, made of POLYAMIDE for -40 to 105°C applications. Featuring 2 FEMALE contacts, COPPER ALLOY material, and UL94V-0 rating, it's ideal for cable mounting with crimp termination in various electronic systems.
2042204004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Mating Contact Finish: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
2042200004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 4; UL Flammability Code: 94V-0; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
204223-0010
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Mounting Type: CABLE; Insulator Material: POLYAMIDE;
2042201110
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Reference Standard: UL; Minimum Operating Temperature: -40 Cel; Contact Style: SQ PIN-SKT;
2042206006
Molex 2042206006 is a Combination Line Connector with 0.827"x.52"x1.075" dimensions, POLYAMIDE insulator, and 105°C max operating temp. Ideal for cable mounting applications, it has 5 female contacts, UL94V-0 flammability rating, and crimp termination.
2042208008
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: 1.075 inch; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mating Contact Finish: NOT SPECIFIED;
2042231110
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: .413 inch; Termination Type: CRIMP; Termination Contact Finish: NOT APPLICABLE;
2042234004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Mixed Contacts: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
2042236006
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Total No. of Contacts: 5;
2042238008
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 105; Contact Material: NOT SPECIFIED; Mounting Type: CABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved