Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FORK TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2 mm2; Terminal Gender: FEMALE;
Median Price
$0.176
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.163
100+ parts
-
1k+ parts
10k+ parts
Heilind Electronics
Mouser Electronics
$0.450
$0.303
$0.222
$0.189
Digiode
$0.167
Nova Conductors
$0.221
Vyrian
VNN
Corphita
$0.158
Netroflash
Continental Prestige Electronics
$0.216
Argo Parts USA
$0.214
Andel Nordic
$28.470
$19.931
Terminals & Terminal Blocks 19147-0057 attributes and parameters. Explore more Terminals & Terminal Blocks devices from Molex
Product Type:
Wire Gauge:
Wire Cross Section:
Terminal Gender:
19147-0057 Terminals & Terminal Blocks trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
Crimson Semiconductor
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Cheng-yi Electronic
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
64323-1039
Molex
FORK TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE; Wire Cross Section: 2 mm2;
MS-25036-101
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 1.42 mm2;
320561
TE Connectivity 320561 is a UL-approved RING TERMINAL for 14 AWG wire with 300V rating. Featuring FEMALE gender, it suits applications requiring secure electrical connections in various industries.
1SNK712064R0000
TE Connectivity's 1SNK712064R0000 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with UL safety approval. Featuring 4 AWG wire gauge, 16 mm2 wire cross section, and 1000 V rated voltage, it can handle up to 75 A current across its 3 ways. Ideal for industrial applications requiring secure electrical connections.
190070040
PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Manufacturer Series: 19007; Terminal Gender: FEMALE;
1755736
Phoenix Contact
Phoenix Contact 1755736 is a STRIP TERMINAL BLOCK with 2.5 mm2 wire cross section, rated for 12A current and 320V voltage. It is mounted on BOARD and approved by CB, CCA, CSA, CUL, EAC, UL. Ideal for applications requiring secure connections in industrial settings.
8-31890-1
TE Connectivity 8-31890-1 is a UL-approved FEMALE RING TERMINAL for 22 AWG wire with a rated voltage of 300V. Featuring a wire cross section of 1.42 mm2, it is ideal for various terminal block applications in electrical systems.
3571
Keystone Electronics
TAB TERMINAL;
1546163-1
MODULAR TERMINAL BLOCK; Manufacturer Series: 1546163;
8197
POWER TERMINAL; Additional Features: BRASS;
3044644
MODULAR TERMINAL BLOCK;
282834-6
TE Connectivity's 282834-6 is a modular terminal block with 6 ways, rated for 10A current and 150V voltage. It uses a screw fastening method and supports wire gauge up to 16 AWG. Ideal for board mounting applications with UL safety approval.
54
Cinch Connectivity Solutions
STRIP TERMINAL BLOCK; No. of Decks: 1; No. of Ways: 6;
324043
RING TERMINAL; Wire Gauge: 8 AWG; Safety Approval: UL; Wire Cross Section: 10.5 mm2; Terminal Gender: FEMALE; No. of Ways: 1;
1777989
Phoenix Contact 1777989 is a BARRIER STRIP TERMINAL BLOCK with 2.5 mm2 wire cross section, rated for 12A current and 320V voltage. It has CB, CSA, CUL, DNVGL, EAC, RS safety approvals and uses SCREW fastening method. Ideal for connecting 12 AWG wires in various electrical applications.
1792863
Phoenix Contact 1792863 is a BOARD mount STRIP TERMINAL BLOCK with 1.5 mm2 wire cross section, rated for 400V voltage and 12A current. It has CUL, GOST, UL safety approvals and uses SPRING LOADED fastening method. Ideal for connecting 14 AWG wires in applications requiring secure electrical connections.
1757268
The Phoenix Contact 1757268 is a STRIP TERMINAL BLOCK with 1 row and 4 ways. It has a rated voltage of 320V, current of 12A, and can accommodate wire gauge up to 13 AWG. It is commonly used for board mounting in various applications requiring secure electrical connections.
2-36160-1
RING TERMINAL; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.62 mm2; Safety Approval: UL; No. of Ways: 1;
MS-25036-148
Molex MS-25036-148 is a UL-approved RING TERMINAL for 16 AWG wire, rated at 300V. With a wire cross section of 1.42 mm2, it's ideal for FEMALE terminals in various electrical applications.
MS25036-112
Defense Logistics Agency
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Wire Cross Section: 6.64 mm2; No. of Ways: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1914830000
Weidmueller & Kg
1914830000 by Weidmueller & Kg is a BARRIER STRIP TERMINAL BLOCK with 9 ways, rated for 24A current and 630V voltage. It supports wire gauge up to 14 AWG and wire cross section of 2.5mm², suitable for BOARD mounting in applications requiring CSA and UL safety approvals.
19144-0003
FORK TERMINAL; Wire Gauge: 18 AWG; Manufacturer Series: 19144; Wire Cross Section: .8 mm2; Terminal Gender: FEMALE;
19144-0001
FORK TERMINAL; Wire Gauge: 18 AWG; Wire Cross Section: .8 mm2; Terminal Gender: FEMALE; Manufacturer Series: 19144;
1914218
STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: CONNECTOR; Additional Features: STANDARD: UL 94V-0, PBT; Wire Gauge: 13 AWG; Voltage (Rated): 320 V;
19144-0042
FORK TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 5 mm2; Terminal Gender: FEMALE; Manufacturer Series: 19144;
1914001
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SPRING LOADED; Additional Features: PBT, 94V-0; Wire Gauge: 20 AWG; Voltage (Rated): 160 V;
19144-0002
19144-0021
FORK TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE; Wire Cross Section: 2 mm2; Manufacturer Series: 19144;
19141-0059
FORK TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE; Manufacturer Series: 19141; Wire Cross Section: 2 mm2;
19144-0026
FORK TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2 mm2; Manufacturer Series: 19144; Terminal Gender: FEMALE;
1914069
1914124
MODULAR TERMINAL BLOCK; Mounting Type: CONNECTOR; Fastening Method: SPRING LOADED; Voltage (Rated): 160 V; No. of Decks: 1; Current (Rated): 4 A;
1914137
BARRIER STRIP TERMINAL BLOCK; Mounting Type: CONNECTOR; Fastening Method: SPRING LOADED; Voltage (Rated): 160 V; No. of Decks: 1; No. of Ways: 21;
1914140
MODULAR TERMINAL BLOCK; Mounting Type: CONNECTOR; Fastening Method: SPRING LOADED; Voltage (Rated): 160 V; No. of Decks: 1; No. of Ways: 22;
1914043
1914071
STRIP TERMINAL BLOCK; Mounting Type: BOARD; Additional Features: PBT, UL 94V-0; Voltage (Rated): 200 V; No. of Ways: 4; Current (Rated): 12 A;
1914195
BARRIER STRIP TERMINAL BLOCK; Mounting Type: CONNECTOR; Fastening Method: SCREW; Additional Features: STANDARD: UL 94V-0, PA; Wire Gauge: 12 AWG; Voltage (Rated): 320 V;
1914205
BARRIER STRIP TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: PA, UL 94V-0, SAFETY APPROVAL: CSA; Wire Gauge: 12 AWG; Voltage (Rated): 320 V;
1914027
19147-0062
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved