Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 172298-1310 is a rectangular power connector with 0.728"x.524"x.551" dimensions, rated for 11A signal current. It operates b/w -40°C to 120°C, UL certified with 10 contacts for board mounting and solder termination. Ideal for applications requiring reliable female SQ PIN-SKT connections in various electronic devices.
Median Price
$3.900
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$4.610
100+ parts
$3.760
1k+ parts
$2.850
10k+ parts
-
TTI
$3.190
$2.770
$2.660
Nova Conductors
$2.398
Digiode
$3.220
Vyrian
VNN
Continental Prestige Electronics
$2.350
Argo Parts USA
Netroflash
$2.278
$2.230
Corphita
$3.051
AZTECH Wire
$16.059
Andel Nordic
$43.450
$30.413
The compact body length allows for easy installation in constrained spaces.
The slim body width ensures versatility in various applications where space is limited.
The moderate body depth strikes a balance between compactness and ease of handling.
With a high maximum operating temperature, this power connector is reliable even in demanding environments.
The low minimum operating temperature allows for use in a wide range of conditions, including extreme cold.
The rectangular shape ensures a secure and reliable connection, minimizing the risk of accidental disconnection.
Having a UL94V-0 flammability rating indicates that the product meets strict safety standards for fire resistance.
The high rated current capacity of 11 A allows for efficient power transmission without risk of overload.
Adhering to the UL reference standard ensures the quality and safety of the product.
With 10 contacts, this power connector can accommodate multiple connections, making it suitable for diverse applications.
The board mounting type provides a secure and stable attachment, ensuring the connector stays in place during operation.
The solder termination type offers a strong and reliable connection, ideal for long-term use.
The female contact gender ensures compatibility with a wide range of mating connectors and devices.
The square pin socket contact style provides a secure and stable connection, reducing the risk of signal loss or power interruptions.
Power Connectors 172298-1310 attributes and parameters. Explore more Power Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Mating Info.:
Mixed Contacts:
Mounting Type:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Reference Standard:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
172298-1310 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ERJU06F10R0V
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Comchip Technology
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
39-29-5203
Molex
Molex 39-29-5203 is a rectangular power connector with 20 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durability over 30 cycles.
39-01-2081
Molex 39-01-2081 is a rectangular power connector with 8 contacts, POLYAMIDE insulator, and UL94V-2 flammability rating. It has a mating contact pitch of 0.165", operates b/w -40 to 105°C, and uses crimp termination for wire sizes ranging from 28 to 16 AWG. Ideal for commercial applications requiring durable connectors with polarization key and center mating row spacing.
39-01-2201
Molex 39-01-2201 is a rectangular power connector with 20 contacts, 2 rows, and 0.165" pitch. It has a body length of 1.701", insulation resistance of 1 Gohm, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable crimp termination in panel mounting setups.
43650-0501
The Molex 43650-0501 is a rectangular power connector with 5 contacts, featuring a mating contact pitch of 0.118" and body width of 0.172". Ideal for board mounting applications, it has a termination contact finish of TIN OVER NICKEL and insulator material made of GLASS FILLED LIQUID CRYSTAL POLYMER.
105307-1203
Power Connectors;
120943-2
TE Connectivity's 120943-2 is a rectangular power connector with matte tin finish, rated at 250V and 16A. With glass-filled polyester insulator, it operates b/w -55 to 125°C. Ideal for board mounting applications requiring reliable female contacts in a right-angle receptacle design.
1053091202
Molex 1053091202 is a RECTANGULAR POWER CONNECTOR with TIN OVER NICKEL finish. Made of LIQUID CRYSTAL POLYMER, it has 2 contacts and UL 94V-0 rating. Ideal for BOARD mounting, SOLDER termination, and MALE contact gender in power applications.
170351-0003
The Molex 170351-0003 power connector features polyester insulator, operating temperatures from -40 to 105°C, and UL flammability rating of 94V-0. It has 2 contacts, crimp termination, and is ideal for cable mounting applications requiring a female blade pin-skt receptacle.
46999-0018
Power Connectors; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
39-30-1120
Molex 39-30-1120 is a rectangular power connector with 12 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.
39-30-2040
The Molex 39-30-2040 is a rectangular power connector with 4 contacts, ideal for board mounting. Featuring a body length of 0.709", width of 0.213", and termination contact finish in TIN, it operates b/w -40 to 105°C. This connector is commonly used in commercial applications requiring reliable power connections.
43045-1023
The Molex 43045-1023 is a rectangular power connector with 10 contacts, featuring a body length of 0.754", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for board mounting applications, this connector has a durable design with TIN over nickel termination finish.
IPD1-06-D
Samtec
Samtec's IPD1-06-D is a RECTANGULAR POWER CONNECTOR with 12 contacts, POLYAMIDE66 shell material, and FEMALE crimp termination. Ideal for power applications requiring secure cable mounting.
39-29-0043
The Molex 39-29-0043 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 2200VAC dielectric voltage. It is used in board mounting applications for commercial reliability, featuring a 0.42" x 0.38" x 0.5" body size and operating temperature range of -40 to 105°C.
432320004
Molex 432320004 is a rectangular power connector with 5 contacts, featuring a mating contact pitch of 0.165" and insulation resistance of 1G ohm. Ideal for board and panel mounting applications, it has a body length of 0.874", operates b/w -40 to 105°C, and uses solder termination.
350767-1
TE Connectivity 350767-1 is a Power Connector with Mating Contact Pitch of 0.25", Insulation Resistance of 100M ohm, and Rated Current of 19A. It is used in applications requiring a durable, polarized housing for power transmission at temperatures ranging from -55 to 105°C.
503148-1090
503148-1090 by Molex is a rectangular power connector with 10 contacts, 0.059" mating pitch, and 500M ohm insulation resistance. Ideal for board mounting applications in commercial settings, it features a right angle mounting style and tin termination finish. Operating temperature ranges from -40 to 105°C.
VLP-06V
J S T Mfg
VLP-06V by J S T Mfg is a RECTANGULAR POWER CONNECTOR with 6 contacts, made of POLYAMIDE66. It has a UL Flammability Code of 94V-0 and FEMALE contact gender. Ideal for CABLE mounting with CRIMP termination, it's commonly used in power applications.
2070170014
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
39-29-6068
The Molex 39-29-6068 is a rectangular power connector with 6 contacts, made of brass and polyamide66. It has a dielectric voltage of 2200VAC, operating temperature range from -40 to 105°C, and insulation resistance of 1Gohm. Ideal for board mounting applications in commercial settings due to its durability and UL94V-0 flammability rating.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
172286-1102
The Molex 172286-1102 power connector features a body size of 0.354" x 0.341" x 0.551", with liquid crystal polymer insulator material. It has a rated current of 14A, UL flammability rating of 94V-0, and operates b/w -40°C to 120°C. Ideal for board mounting applications requiring male SQ pin-skt contacts.
172233-1
TE Connectivity's 172233-1 power connector features insulation resistance of 100M ohm, rated voltage of 600V, and operating temperature range from -20 to 105°C. Ideal for commercial applications requiring a durable male receptacle with crimp termination and natural insulator color.
172298-1106
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
172286-1204
Molex 172286-1204 is a rectangular power connector with 4 contacts, made of liquid crystal polymer. It features tin finish with nickel barrier, UL94V-0 flammability rating, and solder termination. Ideal for board mounting applications requiring male contact gender.
1722991104
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
172298-1304
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Empty Shell: NO; Additional Features: POLARIZED;
172298-1210
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1722861103
The Molex 1722861103 is a rectangular power connector with 3 contacts. It features a liquid crystal polymer insulator and tin contact finish. This connector is suitable for board mounting and can be mated with multiple parts.
172298-2310
1722581104
172298-1312
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Contact Material: NOT SPECIFIED; Contact Style: SQ PIN-SKT;
172298-1110
RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
172298-2110
RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1722981104
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Empty Shell: NO; Termination Contact Finish: NOT APPLICABLE;
1722982210
RECTANGULAR POWER CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; Mating Contact Finish: NOT SPECIFIED; Contact Material: COPPER ALLOY;
1722991210
RECTANGULAR POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3; Contact Material: COPPER ALLOY; Termination Contact Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
1722564102
1722564103
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: .453 inch; Insulator Material: POLYAMIDE; Mating Info.: MULTIPLAE MATING PARTS AVAILABLE;
1722564104
172298-1316
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 16; Termination Contact Finish: NOT APPLICABLE; Body Width: .524 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved