Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Reliability: COMMERCIAL; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE; Minimum Withdrawal Force (N): .0834; Termination Contact Finish: Tin (Sn);
Median Price
$24.720
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Verical
1+ parts
$23.700
100+ parts
$22.390
1k+ parts
$21.940
10k+ parts
-
Newark
$35.240
$26.950
$26.060
DigiKey
$25.740
$23.400
Chip1Stop
$23.600
$23.000
Digiode
$22.515
Vyrian
$22.550
TestEquity
$25.280
Component Sense
IBS Electronics
$24.137
$21.938
TME
$32.394
Andel Nordic
$8.292
$7.960
Corphita
$21.330
Assy Fe
Headers & Edge Type Connectors 1705305026 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
Contact Resistance:
Dielectric Withstanding Voltage (V):
Durability:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
JESD-609 Code:
Mating Contact Pitch (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
Minimum Withdrawal Force (N):
1705305026 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS-7-F
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
Zetex Plc
Diotec Semiconductor Ag
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
B3B-XH-A-GU
J S T Mfg
BOARD CONNECTOR; Manufacturer Series: XH;
154763
Erni Electronics
Erni Electronics 154763 is a Headers & Edge Type Connector with Mating Contact Pitch of 0.05", Insulation Resistance of 10^10 ohm, and Dielectric Withstanding Voltage of 500VAC. Ideal for board stacking applications, featuring liquid crystal polymer insulator material and gold mating contact finish.
22-27-2051
Molex
The Molex 22-27-2051 is a board connector with 5 contacts, featuring a mating pitch of 0.1", insulation resistance of 1Gohm, and rated current of 4A. It is used in applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
851-43-030-30-002000
Mill-max Mfg
The Mill-max Mfg 851-43-030-30-002000 is a BOARD CONNECTOR with 30 contacts, TIN finish. It has a terminal pitch of 1.27mm and is designed for SURFACE MOUNT applications. Ideal for use in electronic devices requiring FEMALE SOCKET connectors on PCBs.
EHR-4
EHR-4 by J S T Mfg is a BOARD CONNECTOR with 0.098" mating contact pitch, 0.15" body width, and 0.28" body depth. It has 4 contacts, UL 94V-0 flammability rating, and FEMALE gender. Ideal for CABLE mounting with CRIMP termination, suitable for various electronic applications.
B6B-XH-A(LF)(SN)
B6B-XH-A(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.098" pitch, 1000000000 ohm insulation resistance, and 3A signal current rating. It features POLYAMIDE66 insulator material, TIN OVER COPPER mating contact finish, and operates b/w -25 to 85 °C. Ideal for board-to-board connections in electronics applications.
TSW-108-17-T-S
Samtec
TSW-108-17-T-S by Samtec is a 0.1 inch pitch board connector with 8 contacts and a max operating temperature of 105°C. It features a durable design with a mating contact finish of matte tin over nickel, making it suitable for various applications in electronics and PCB assemblies.
801-43-020-10-012000
Mill-max Mfg's 801-43-020-10-012000 is a 20-contact board connector with matte tin over nickel finish. Featuring a terminal pitch of 2.54mm, it is ideal for applications requiring a female socket connector with UL94V-0 flammability rating. Suitable for straight mounting on boards, this connector offers reliable solder termination.
B4B-ZR-SM4-TFT(LF)(SN)
B4B-ZR-SM4-TFT(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, BRASS material, and Tin finish. It has a terminal pitch of 1.5mm and is used for surface mount applications in headers & edge type connectors.
ESHF-105-01-L-D-SM-TR
The Samtec ESHF-105-01-L-D-SM-TR is a 2-row board connector with 10 contacts, featuring a mating contact pitch of 0.05" and matte tin finish. It is ideal for applications requiring a temperature range of -55 to 125°C, with liquid crystal polymer insulator material ensuring reliability in commercial settings. The connector's straight mounting style and surface mount termination make it suitable for various PCB designs.
7-215079-8
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mating Contact Row Spacing (inch): 0.059; PCB Contact Row Spacing (mm): 2.54;
FTSH-105-01-L-DV-007-K-P-TR
Samtec's FTSH-105-01-L-DV-007-K-P-TR is a 2-row, 9-contact board connector with a mating contact pitch of 0.05". It features tin termination with nickel barrier, rated for 3.4A signal current and operating temperatures from -55 to 125°C. Ideal for commercial applications requiring reliable male connectors on PCBs with rectangular contact patterns.
1-640456-3
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Mixed Contacts: NO; JESD-609 Code: e3;
S6B-XH-A(LF)(SN)
S6B-XH-A(LF)(SN) by J S T Mfg is a 6-contact board connector with brass contacts and tin termination finish. It has a terminal pitch of 2.5mm, suitable for right angle mounting applications. Ideal for use in electronics requiring reliable soldered connections with UL 94V-0 flammability rating.
2-640456-6
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POLARIZED; Termination Type: SOLDER; Mating Contact Finish: TIN;
22-12-2061
The Molex 22-12-2061 is a board connector with mating contact pitch of 0.1", insulation resistance of 50G ohm, and dielectric voltage rating of 1500VAC. It is used in applications requiring a durable, right-angle mounting style for commercial reliability.
1410140-1
TE Connectivity
TE Connectivity's 1410140-1 is a board connector with 144 contacts, featuring a mating contact pitch of 0.071", liquid crystal polymer insulator material, and tin/lead termination finish. With a rated current of 1A, it operates b/w -55°C to 105°C and is ideal for applications requiring high-density connections on PCBs in electronic devices.
DF3A-2P-2DSA
Hirose Electric
DF3A-2P-2DSA by Hirose Electric is a board connector with 0.079" mating contact pitch, 650VAC dielectric voltage, and 1000000000 ohm insulation resistance. Ideal for commercial applications, it features a solder termination type and operates b/w -30 to 85 °C temperatures.
G125-MV22005L0P
Harwin Plc
G125-MV22005L0P by Harwin PLC is a 20-contact, gold-plated male board connector with 2 rows and a terminal pitch of 1.25mm. It has UL94V-0 flammability rating and solder termination, suitable for various applications requiring reliable board-to-board connections in electronics.
SFW4S-2STE1LF
Amphenol Communications Solutions
The Amphenol SFW4S-2STE1LF is a 4-contact FFC/FPC connector with 0.039" pitch, tin finish, and UL94V-0 rating. It is designed for surface mount board applications, featuring female contacts in a straight mounting style. Ideal for compact electronic devices requiring reliable signal transmission.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved