Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 152660055 is a flat flexible cable with 6 conductors, rated for 60V and 0.5A. It operates b/w -40°C to 105°C, making it suitable for various electrical wiring applications requiring flexibility and durability in tight spaces.
Median Price
$2.030
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Newark
1+ parts
$0.567
100+ parts
1k+ parts
10k+ parts
-
Verical
$2.010
$1.870
Mouser Electronics
$3.390
$2.240
Element14
$4.980
$3.490
$2.890
$2.690
Master Electronics
$1.880
$1.600
Chip1Stop
$1.750
Powell Electronics
DigiKey
$2.930
$2.770
Farnell
$2.310
Digiode
$0.539
Nova Conductors
$1.930
Vyrian
IBS Electronics
$2.833
$2.637
TME
$3.200
$2.660
VNN
Corphita
$0.510
Continental Prestige Electronics
$1.891
Netroflash
Argo Parts USA
Aztec Data Supply Inc.
$5.398
Andel Nordic
$5.775
$5.544
The flat construction of this cable makes it easy to lay and run in confined spaces, ideal for applications where traditional round cables may be difficult to install.
With a rated voltage of 60V, this cable is suitable for low voltage applications, providing a safe and reliable power transmission.
The high maximum operating temperature of 105°C ensures that this cable can withstand harsh environmental conditions without compromising its performance.
The low minimum operating temperature of -40°C makes this cable suitable for use in cold environments without the risk of damage or failure.
The specific length of 0.076mm allows for precise customization and fitting, ensuring minimal wastage and optimal use of the cable.
With a rated current of 0.5A, this cable is suitable for low power applications where a higher current capacity is not required, making it cost-effective and efficient.
Having 6 conductors provides flexibility and versatility in wiring configurations, allowing for multiple connections and circuits within a single cable.
The flat flexible cable design combines the benefits of both flexibility and ease of installation, making it an ideal choice for applications that require mobility and compactness.
Electrical Wires & Cables 152660055 attributes and parameters. Explore more Electrical Wires & Cables devices from Molex
Connector Accessory Type:
Construction:
DIN Conformity:
IEC Conformity:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Shielding:
Wire & Cable Name:
PCN Design/Specification - 15266, 15267, 15268 Series Thickness 13/May/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
1554216004
Molex
WIRE AND CABLE;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Hitano Enterprise
Tak Cheong Electronics Holdings
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
Unitrode
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
3051/1RD005
Alpha Wire
55A0111-28-5
TE Connectivity
TE Connectivity's 55A0111-28-5 is a stranded electrical wire with a rated voltage of 600V and conductor finish of TIN. It is used for general purpose applications, lightweight, and has a max operating temperature of 150°C.
59310
Helukabel
Helukabel 59310 is a stranded power cable with elastomer jacket and shielding, rated for 600V. Suitable for marine/offshore applications, it features copper alloy conductors, EPDM insulator, and operates up to 85°C. With 4 conductors at 70mm² cross section area, it's ideal for demanding electrical installations.
M22759/11-22-0
Carlisle Interconnect Technologies
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Maximum Operating Temperature: 200 Cel; No. of Conductors: 1; Stranding: 19X34;
83284009100
Belden
Belden 83284009100 is a MIL-approved communication cable with stranded construction, FEP jacket, and TFE insulator. It has a rated voltage of 900V, silver conductor finish, and operates b/w -70°C to 200°C. Ideal for military applications requiring reliable signal transmission over long distances.
12534
Helukabel 12534 is a CONTROL CABLE with 4 STRANDED BARE COPPER conductors, rated at 600V. It has CE, CSA, EAC, UL approvals and a POLYURETHANE jacket suitable for MACHINE TOOLS and CONTROL SYSTEMS. With a temperature range of -40 to 80 °C, it's ideal for connecting control systems in various applications.
115101-35-180
Amphenol
CABLE ASSEMBLY;
FZTSLXNXNSNM025
Panduit
Panduit FZTSLXNXNSNM025 is a 10mm communication cable with 12 conductors, ISO/IEC and TIA approvals. Ideal for SAN applications, it has LC cassette connectors on both sides, operating b/w -20°C to 70°C.
153660984
Molex 153660984 flat cable with UL approval, shielding, and tin finish. Rated for 60V, -40 to 105°C operating temp range. Ideal for FFC connectors in applications requiring 0.015mm2 cross section area and 0.5A rated current.
19013
FFSD-10-D-12.00-01-N
Samtec
Samtec's FFSD-10-D-12.00-01-N is a UL-approved stranded flat cable with tin finish, PVC insulation, and 30 AWG wire gauge. Ideal for high reliability applications, it has a max operating temperature of 105°C and min of -40°C. With 20 conductors, each 0.305mm long, this cable features socket connectors on both ends and a cross-section area of 0.0509mm².
80893
Helukabel 80893 is a communication cable with 48 conductors, suitable for indoor cabling. It has approvals from DIN and VDE, operating b/w -20°C to 60°C. With a diameter of 13.5mm, it's ideal for patching and crossing applications.
M17/176-00002
Nexans Sa
WIRE AND CABLE; Shielding: YES; Conductor Finish: SILVER; Maximum Operating Temperature: 200 Cel; IEC Conformity: NO; Conductor Material: COPPER ALLOY;
55A0111-20-0
TE Connectivity 55A0111-20-0 is a CSA, CAA, MIL, UL approved stranded wire with 600V rating. Featuring copper alloy conductor with tin finish and 19X32 stranding, it operates b/w -65 to 150 °C. Ideal for applications requiring flexible cord and fixture wire such as SPEC 55 cables.
44A0111-20-09-US
P569-010
Tripp Lite
2149201214
U2A00007-36I
Infinite Electronics International
AGHGH28K203
J S T Mfg
AGHGH28K203 by J S T Mfg is a UL approved electrical wire with 28 AWG, rated for 50V and 1A. Ideal for FLEXIBLE CORD AND FIXTURE WIRE applications due to its 0.08 mm2 cross section area and SSHL-002T-P0.2 connectors on both sides.
44A0111-16-98-L030
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
152661014
Molex 152661014 is a FLAT FLEXIBLE CABLE with 31 conductors, rated for 60V and 0.5A. It operates b/w -40°C to 105°C, making it suitable for applications requiring a compact design and high flexibility in electrical wiring setups.
152661034
Molex 152661034 is a FLAT FLEXIBLE CABLE with 33 conductors, rated for 60V and 0.5A. It operates b/w -40°C to 105°C, making it suitable for various electrical wiring applications. Length of 0.076mm provides flexibility in installations.
152660404
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Construction: FLAT; DIN Conformity: NO;
152661009
Molex 152661009 is a FLAT FLEXIBLE CABLE with 31 conductors, rated for 60V and 0.5A. It operates b/w -40°C to 105°C, making it suitable for various electrical applications requiring a compact and flexible wiring solution.
152670203
Molex 152670203 flat cable with UL approval, rated for 60V and 1.25A. Features tin finish copper alloy conductor, polyester insulator, -40 to 105 °C operating temp range. Ideal for electrical wiring applications requiring a flexible flat cable design.
152660984
152661013
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Wire & Cable Name: FLAT FLEXIBLE CABLE; Length: .076 mm;
152661048
Molex 152661048 is a flat flexible cable with 33 conductors, rated for 60V and 0.5A. It operates b/w -40°C to 105°C, making it suitable for various electrical wiring applications requiring a compact 0.254mm length.
152660989
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Length: .051 mm; MIL Conformity: NO;
152661025
Molex 152661025 is a flat flexible cable with 31 conductors. It has a rated voltage of 60V and can operate in temperatures ranging from -40°C to 105°C. This cable is commonly used in electrical applications requiring a compact and flexible wiring solution.
152660051
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; MIL Conformity: NO; DIN Conformity: NO;
152660343
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Minimum Operating Temperature: -40 Cel; DIN Conformity: NO;
152661049
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Wire & Cable Name: FLAT FLEXIBLE CABLE; DIN Conformity: NO;
152661044
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Wire & Cable Name: FLAT FLEXIBLE CABLE; Length: .203 mm;
152660057
Molex 152660057 is a FLAT FLEXIBLE CABLE with 6 conductors. It has a rated voltage of 60V and can operate in temperatures ranging from -40°C to 105°C. This cable is commonly used in electrical applications requiring a max current of 0.5A over a length of 0.102mm.
152661008
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; MIL Conformity: NO; Wire & Cable Name: FLAT FLEXIBLE CABLE;
152661028
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; DIN Conformity: NO; Length: .305 mm;
152661033
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; IEC Conformity: NO; MIL Conformity: NO;
152661053
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Length: .03 mm; Maximum Operating Temperature: 105 Cel;
152660091
WIRE AND CABLE; Rated Voltage: 60 V; Rated Current: .5 A; Shielding: NO; Wire & Cable Name: FLAT FLEXIBLE CABLE; Construction: FLAT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved