Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
WIRE AND CABLE; Rated Voltage: 50 V; Rated Current: .2 A; Shielding: NO; Conductor Material: COPPER ALLOY; DIN Conformity: NO;
Median Price
$3.120
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$2.370
1k+ parts
-
10k+ parts
Digiode
$2.442
Vyrian
$2.570
Corphita
$2.313
Electrical Wires & Cables 150320223 attributes and parameters. Explore more Electrical Wires & Cables devices from Molex
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Construction:
DIN Conformity:
IEC Conformity:
Insulator Material:
Length:
MIL Conformity:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Resistance:
Shielding:
Wire & Cable Name:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Space Power Electronics
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
2N7002DWH6327XTSA1
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Won-top Electronics
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Lite-on Semiconductor
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
5855/7WH005
Alpha Wire
Alpha Wire 5855/7WH005 is a stranded wire with silver finish, TFE insulator, and copper conductor. It has a rated voltage of 600V and operates b/w -60 to 200°C. Ideal for electronic, medical, and military applications due to its MIL approval.
3051/1WH005
Alpha Wire 3051/1WH005 is a CSA/UL approved solid wire with TIN finish, rated for 300V. Ideal for flexible cord applications, it features PVC insulation, copper alloy conductor, and operates b/w -40 to 105°C.
6010CSL002
Alpha Wire 6010CSL002 is a 300V stranded cable with PVC jacket, shielding, and tin finish. Suitable for communication/control applications, it has 6 conductors of copper alloy with a cross-section area of 0.326mm2. Operating b/w -20 to 75°C, this cable is ideal for various electrical installations.
44A0111-28-96
TE Connectivity
TE Connectivity's 44A0111-28-96 is a flexible cord and fixture wire with 600V rated voltage, TIN conductor finish, and PVDF insulator. Ideal for applications requiring a temperature range of -65 to 150°C, this wire features copper alloy conductors in 28 AWG size.
84510101000
Belden
WIRE AND CABLE;
TC2030-MCP-NL
Tag-connect
CABLE ASSEMBLY; Connector Side-1: TAG6PIN; Connector Side-2: RJ12; Shielding: NO; DIN Conformity: NO; MIL Conformity: NO;
M27500-20SD2T23
TE Connectivity's M27500-20SD2T23 is a 600V rated cable with TIN finish, suitable for temperatures ranging from -65°C to 150°C. Featuring a copper alloy conductor and 20 AWG wire gauge, it is ideal for applications requiring MIL-DTL-27500 cables such as flexible cords and fixture wires.
FFSD-25-D-06.00-01-N
Samtec
Samtec's FFSD-25-D-06.00-01-N is a UL-approved stranded flat cable with tin finish, PVC insulation, and 30 AWG wire gauge. Ideal for high reliability applications, it has a max operating temperature of 105°C and min of -40°C. With 50 conductors, each 0.152mm long, this cable features 7X38 stranding and can handle up to 2.3A current.
09454521504
Harting Electronics & Kg
09454521504 by Harting Electronics & Kg is a shielded communication cable with 8 conductors, AWG 8 wire gauge, and stranded construction (7X27). It has RJ45 jack and plug connectors for applications requiring reliable data transmission in temperatures ranging from -25 to 70°C.
115101-19-M3.00
Amphenol
CABLE ASSEMBLY;
M17/94-RG179
Tri-star Electronics International
WIRE AND CABLE; Shielding: YES; Construction: STRANDED; Insulator Material: PTFE; MIL Conformity: YES; Conductor Finish: SILVER;
18256
Helukabel
The Helukabel 18256 is a CE, DIN, EAC approved cable with stranded construction and polyurethane jacket. It has a rated voltage of 300V and insulator made of thermoplastic elastomer. Ideal for robust applications in dry, damp, and wet rooms with operating temperatures ranging from -40 to 90°C.
44A1121-24-0/9-9-MX
TE Connectivity's 44A1121-24-0/9-9-MX cable is a stranded, shielded wire with a rated voltage of 600V. It features a tin conductor finish and is suitable for general purpose applications at temperatures ranging from -65 to 150°C. With a wire gauge of 24 AWG and copper alloy construction, it is ideal for use in flexible cords and fixture wiring.
55A0111-22-91
TE Connectivity's 55A0111-22-91 is a STRANDED wire with TIN finish, rated at 600V. With a conductor made of COPPER ALLOY, it has a diameter of 1.09mm and operates b/w -65 to 150°C. Ideal for GENERAL PURPOSE applications, this FLEXIBLE CORD is lightweight and features a cross section area of 0.38 mm2.
1110751004
Molex
Wires and Cables;
982660193
Molex 982660193 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor. Suitable for applications requiring -40 to 105 °C operating temperature range, 0.03 mm2 cross section area, and 0.73 ohm resistance.
M22759/34-16-9
Allied Wire & Cable
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Construction: STRANDED; Additional Features: STANDARD: MIL-W-22759/34; No. of Conductors: 1;
801733
Helukabel 801733 is a PVC jacketed communication cable with CSA and UL approvals. It has 2 conductors, 7.5mm diameter, -30 to 85°C operating temp range. Ideal for fixed or limited flexible installations in dry or damp rooms.
M22759/11-22-2
Defense Logistics Agency
M22759/11-22-2 by Defense Logistics Agency is a MIL-W-22759 approved electrical wire with stranded construction, silver conductor finish, and extruded TFE insulator. Rated for 600V, it has a max temp of 200°C. Ideal for flexible cord and fixture wire applications due to its copper conductor and 0.05 ohm resistance.
5203
Quabbin Wire & Cable
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Minimum Operating Temperature: -20 Cel; Application: JUMPER AND PATCH CABLE FOR CATEGORY 5E; Insulator Material: POLYETHYLENE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved