Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
15-24-6180 by Molex is a rectangular power connector with 18 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable connections on compliant boardlock mounting options.
Median Price
$3.260
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Master Electronics
1+ parts
$3.113
100+ parts
$2.830
1k+ parts
$2.680
10k+ parts
$2.230
Mouser Electronics
$4.550
$3.660
$3.270
$3.140
RS (Exports)
$4.620
$3.330
$2.910
-
RS Americas
$4.950
$3.810
$3.370
DigiKey
$5.450
PEI Genesis
Chip1Stop
$2.600
$2.260
NEP Electronics
TTI Europe
$2.776
$2.326
TTI
Verical
$3.060
Powell Electronics
$3.080
$2.920
$2.870
Digiode
$2.717
Bristol Electronics
$2.850
$1.425
Nova Conductors
$3.160
Component Electronics Inc.
$3.850
$2.880
$2.500
TME
Vyrian
VNN
IBS Electronics
$3.436
$3.254
$2.735
Elcom Components
DF Sales Co.
Semicontronic
$2.360
$2.301
$2.289
Corphita
$2.574
Continental Prestige Electronics
$3.097
Argo Parts USA
Aztec Data Supply Inc.
$4.382
Andel Nordic
$5.423
$5.206
Kepictronics
Authorized Procurement Solutions
Perfect Parts
Assy Fe
EMSNET (Excess)
Eastek
Close contact pitch allows for efficient power transfer and reliable connection.
Suitable length for accommodating the required number of contacts without being too bulky.
High insulation resistance ensures minimal leakage current and reliable operation.
Moderate body width for easy handling and installation.
High voltage withstand capability ensures safety in high-power applications.
Tin and nickel finish provides excellent conductivity and corrosion resistance.
Adequate depth for securely housing the connectors and contacts.
Polyamide66 material offers good mechanical strength and insulation properties.
Two rows of contacts allow for increased power transmission capacity.
Compliant boardlock ensures secure PCB mounting and prevents accidental disconnection.
High maximum operating temperature for extended usage in various environments.
Optimal row spacing for efficient PCB layout and connection.
Low minimum operating temperature for use in cold environments.
Adequate plating thickness for ensuring durability and longevity of the connectors.
Two rows of PCB contacts for increased connectivity options.
Rectangular design for easy identification and compatibility with power applications.
Brass contact material for good conductivity and resistance to corrosion.
UL V-2 flammability rating ensures safety in case of fire.
Polarized housing to prevent incorrect mating and ensure proper connection.
6A rated current for reliable power transmission without risk of overheating.
Compliance with industry standards for quality and safety assurance.
Sufficient number of contacts for handling multiple power sources or signals.
Single connector for easy installation and less clutter on the PCB.
30-cycle durability rating ensures long-lasting performance and reliability.
Matching contact row spacing for easy and secure mating of connectors.
Board mounting type for stable and secure attachment to PCB.
Optimal terminal pitch for efficient signal transmission and connection.
Rectangular contact pattern for easy alignment and connection on PCB.
Solder termination for secure and durable connection.
Low withdrawal force for easy removal without risk of damage.
Male contact gender for secure connection and compatibility with female connectors.
Low contact resistance for efficient power transmission and minimal energy loss.
Receptacle style body for easy insertion and secure connection.
Right angle mounting style for space-saving and efficient PCB layout.
Square pin socket contact style for easy alignment and secure connection.
High insertion force for secure and stable connection between connectors.
Locking mounting option for additional security and stability.
Optimal terminal length for secure connection and minimal signal loss.
Polarized locking mounting option for preventing incorrect mating and ensuring proper connection.
Rectangular contact pattern for easy alignment and connection with compatible connectors.
Commercial grade reliability for consistent performance in varied applications.
Power Connectors 15-24-6180 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
15-24-6180 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Mini-FIt,KK Plating 01/Nov/2011
PCN Assembly/Origin - Mult Devs Supplier 09/Dec/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Signetics
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
39-30-3032
Molex
The Molex 39-30-3032 is a rectangular power connector with matte tin over nickel finish. It features 3 contacts, brass material, and polyamide insulator for reliability in commercial applications. With a body length of 0.94", width of 0.213", and depth of 0.49", it is ideal for board mounting in right angle configurations.
50-84-2040
The Molex 50-84-2040 is a rectangular power connector with 4 contacts, rated at 13.5A signal current. It features a mating contact pitch of 0.25", insulation resistance of 1Gohm, and dielectric voltage withstand of 5000VAC. Ideal for commercial applications requiring durable connections in temperatures ranging from -55 to 105°C.
39-31-0020
Molex 39-31-0020 is a rectangular power connector with 2 rows, rated at 9A signal current. Featuring POLYAMIDE66 insulator material, it offers high insulation resistance of 1Gohm and withstands up to 1500VAC. Ideal for board mounting applications in commercial settings due to its durability of 30 cycles and UL94V-0 flammability rating.
428193222
Molex 428193222 Power Connector features 0.394" mating contact pitch, 1.33" body length, and 1000000000 ohm insulation resistance. Ideal for applications requiring a durable connector with 2200VAC dielectric voltage withstand and -40 to 105°C operating temperature range.
39-01-2185
The Molex 39-01-2185 is a rectangular power connector with 18 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It is used for cable mounting applications requiring high insulation resistance of 1Gohm and UL94V-0 flammability rating. The female connectors have a crimp termination style and straight mounting option with locking feature for commercial reliability.
5557-02R
Molex 5557-02R is a rectangular power connector with 2 rows, POLYAMIDE insulator, and 0.77" body depth. It operates b/w -40 to 105°C, suitable for cable mounting applications requiring female contacts with SQ PIN-SKT style.
2204581-1
TE Connectivity
TE Connectivity's 2204581-1 is a rectangular power connector with rated voltage of 400V and UL flammability code of 94V-0. It has insulator material made of glass filled liquid crystal polymer, operating temperature range from -40 to 105°C, and plating thickness of 118.11u. Ideal for board mounting applications, this male connector with press fit termination supports a signal current rating of 35A.
1-917658-3
Tyco Electronics Amp
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 917658; DIN Conformance: NO; Contact Material: COPPER ALLOY;
1-480707-0
TE Connectivity's 1-480707-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator material. Featuring 9 contacts, it has a durability of 50 cycles and operates b/w -55 to 105 °C. Ideal for commercial applications, this connector offers crimp termination and panel mounting options.
1-770974-1
TE Connectivity 1-770974-1 Power Connector with Matte Tin finish, rated 600V and 9.5A signal current. Ideal for board mounting applications with POLYAMIDE insulator material, UL94V-0 flammability rating, and operating temperature range of -55 to 105°C.
350720-1
TE Connectivity's 350720-1 Power Connector features 0.25" Mating Contact Pitch, POLYAMIDE Insulator Material, and -55 to 105°C Operating Temperature range. Ideal for cable mounting applications, this connector has a total of 9 contacts and is UL certified for reliability in commercial settings.
1-480709-0
TE Connectivity 1-480709-0 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 12 contacts arranged in S0P12 pattern, suitable for PANEL mounting. Operating temp range -55 to 105 °C makes it ideal for commercial applications requiring high durability and insulation resistance of 100M ohm.
IPS1-125-01-S-D
Samtec
The Samtec IPS1-125-01-S-D is a rectangular power connector with 50 contacts. It features phosphor bronze contact material with gold finish and liquid crystal polymer insulator. Ideal for board mounting applications requiring solder termination, especially in power systems.
IPL1-102-01-L-D-RA-K
Samtec IPL1-102-01-L-D-RA-K is a rectangular power connector with 4 contacts, liquid crystal polymer insulator, and tin over nickel termination. It is used in commercial applications for board mounting and solder termination.
39-01-2200
Molex 39-01-2200 is a RECTANGULAR POWER CONNECTOR with 20 contacts, POLYAMIDE66 insulator, and 1500VAC Dielectric Withstanding Voltage. It has a temperature range of -40 to 105 °C and is ideal for commercial applications requiring high insulation resistance and reliable crimp termination on cables.
10-84-4090
Molex 10-84-4090 is a rectangular power connector with 9 contacts, Tin finish, and Polyamide66 insulator. It has an insulation resistance of 1Gohm, dielectric voltage of 500VAC, and operates b/w -55 to 105°C. Ideal for board mounting in commercial applications due to its durability and UL certification.
39-29-0023
Molex 39-29-0023 is a rectangular power connector with 2 contacts, made of brass and polyamide66. It has a dielectric voltage of 2200VAC, insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
39-01-2101
Molex 39-01-2101 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It has a mating contact pitch of 0.165", operates b/w -40 to 105°C, and supports wire sizes from 28 to 16 AWG. Ideal for cable and panel mounting applications requiring durability over 30 cycles.
1-1123309-2
TE Connectivity 1-1123309-2 is a rectangular power connector with 4 contacts, rated at 45A. Featuring a body length of 1.156", it has an insulation resistance of 1Gohm and operates b/w -55 to 105°C. Ideal for board mounting applications with solder termination, this connector offers durability of 25 cycles and UL certification.
39-01-4051
Molex 39-01-4051 is a rectangular power connector with 5 contacts, POLYAMIDE66 insulator, and 0.165" mating contact pitch. It operates b/w -40 to 105°C, suitable for commercial applications requiring durable crimp termination on cables with wire sizes ranging from 16 AWG to 28 AWG.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
15-24-4449
The Molex 15-24-4449 is a rectangular power connector with 4 contacts, featuring matte tin finish and polyamide66 insulator. It has a dielectric voltage of 1500VAC, operating temperature range from -40 to 105°C, and durability of 50 cycles. Ideal for board mounting applications in commercial settings.
15-24-6140
The Molex 15-24-6140 is a rectangular power connector with 14 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durable connectors with polarization key and locking options.
15-24-6100
15-24-6100 by Molex is a rectangular power connector with 10 contacts, rated at 7A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durability and reliability in commercial settings.
15-24-7100
15-24-7100 by Molex is a rectangular power connector with 10 contacts, featuring a body length of 0.87", insulation resistance of 1Gohm, and operating temperatures from -40 to 105°C. Ideal for board mounting applications, it has a contact material of brass and insulator material of Polyamide66.
15-24-4048
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; No. of Connectors: ONE;
15-24-6101
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE;
15-24-6102
The Molex 15-24-6102 is a rectangular power connector with 10 contacts, rated at 7A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards compliant with CSA and UL regulations.
15-24-6181
15-24-6182
15-24-7060
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Body or Shell Style: RECEPTACLE;
15-24-6041
15-24-6143
The Molex 15-24-6143 is a rectangular power connector with 14 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring durable board mounting options with locking mechanisms.
15-24-9067
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 2200VAC; No. of Connectors: ONE;
15-24-6141
The Molex 15-24-6141 is a rectangular power connector with 14 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and operates b/w -40°C to 105°C. Ideal for board mounting applications requiring durable connectors with a polarization key and compliant boardlock option.
15-24-7040
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Empty Shell: NO;
15-24-7140
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; UL Flammability Code: 94V-2;
15-24-7160
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; DIN Conformance: NO;
15-24-9184
The Molex 15-24-9184 is a rectangular power connector with a mating contact pitch of 0.165 inches. It has a body length of 1.75 inches and insulation resistance of 1,000,000,000 ohms. This connector is commonly used in power applications requiring a durable and reliable connection.
15-24-9244
15-24-6107
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved