Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF/Microwave Antennas;
Median Price
$1.999
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Arrow
1+ parts
$1.975
100+ parts
$1.269
1k+ parts
$1.212
10k+ parts
-
Distrelec
$2.023
Mouser Electronics
$2.270
$1.600
$1.390
$1.270
DigiKey
$2.310
$1.394
$1.229
$1.163
Element14
$2.426
$1.650
$1.635
Newark
$2.480
$1.910
$1.570
$1.460
Farnell
$2.679
$1.678
$1.639
Chip1Stop
$1.240
$1.120
$1.010
Master Electronics
$1.330
$1.130
$1.060
Powell Electronics
$1.200
$1.150
$1.030
Verical
$1.230
$1.100
TTI Europe
$1.487
$1.400
Digiode
$0.794
Nova Conductors
$1.093
TestEquity
$1.170
TME
$2.840
$1.920
$1.890
Vyrian
NAC Semi
$2.620
Electro Sonic
$1.040
IBS Electronics
$1.875
$1.593
$1.495
VNN
Corphita
$0.752
Continental Prestige Electronics
$1.080
$1.058
Argo Parts USA
Aztec Data Supply Inc.
$1.221
Component Stockers USA
$1.280
$1.000
$0.880
$0.830
Abacus Technologies
Netroflash
$1.071
$1.038
$1.016
Assy Fe
Perfect Parts
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
LM358DT
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
APAMS-102
Abracon
Abracon's APAMS-102 is a 50 ohm, 1 dB gain RF antenna with omni-directional linear polarization. It operates b/w 820-960 MHz bandwidth for CDMA/GPRS/GSM/UMTS/WIRELESS applications. With a VSWR of 2, it can withstand temperatures from -40 to 80°C and features panel mounting in coaxial construction.
1001312
KYOCERA AVX
1001312 by KYOCERA AVX is a CERAMIC RF antenna with 1.8 VSWR and 0.5 W power, ideal for BT, WI-FI, ZIGBEE applications. It operates b/w 2400-2485 MHz frequencies, has linear polarization, and mounts via surface mount for mobile station use.
2450AT45A100E
Johanson Technology
Johanson Technology's 2450AT45A100E is a RF/Microwave Antenna with 3W power, 1dB gain, and 50 ohm impedance. It operates b/w -40°C to 125°C, covering frequencies from 2400MHz to 2500MHz. Ideal for various wireless communication applications.
ARRUN5-868.000MHZ
ARRUN5-868.000MHZ by Abracon is a COAXIAL RF antenna with 1.5 VSWR, 5.5 dB gain, and RHCP polarization. Ideal for RFID applications, it operates b/w -40°C to 80°C and supports frequencies up to 871 MHz as a BASE STATION/BROADCAST TRANSMISSION ANTENNA with 50 ohm impedance.
ACR0301U
MOBILE STATION ANTENNA;
APAMS-118
Abracon's APAMS-118 is a 50 ohm, 2 dB gain RF antenna with omni-directional coverage. It operates b/w 890-960 MHz bandwidth for CDMA/GPRS/GSM/UMTS/WIRELESS applications. With linear polarization and coaxial construction, it can withstand temperatures from -45 to 85 °C.
M830520
M830520 by KYOCERA AVX is a ceramic RF antenna with 2.8 VSWR and 0.5 W transmission power, ideal for mobile station applications in agriculture, automotive, healthcare, and more. Operating b/w 2400-2485 MHz with linear polarization and 50 ohm impedance, it features surface mounting for easy installation.
2203
Thales Components
BASE STATION/BROADCAST TRANSMISSION ANTENNA; Gain: 15 dB; Maximum Voltage Standing Wave Ratio: 1.4; Maximum Operating Frequency: 2170 MHz; Polarization: DUAL POLARIZED; Wind Rating: 125.268 mph;
A1004795
2091420180
Molex
Molex 2091420180 is an Omni-Directional RF Antenna for Cellular/LTE applications. Constructed as a module with linear polarization, it operates b/w 698-960 MHz frequencies. Featuring a plastic/epoxy body, it has a characteristic impedance of 50 ohm and mounts on panels.
GSA.8845.A.105111
Taoglas
GSA.8845.A.105111 by Taoglas is an Omni-Directional RF antenna with 5W power, linear polarization, and 50 ohm impedance. Ideal for mobile stations in 2G/3G/4G/5G networks, it operates b/w 450-470 MHz with a temperature range of -40 to 85°C. Features adhesive mounting and coaxial construction for reliable performance.
HG142PSWB-NMO
L-com
ANT016008LCS2442MA2
TDK
ANT016008LCS2442MA2 by TDK is an RF/Microwave Antenna with a VSWR of 3, operating temperature range from -40°C to 85°C, and bandwidth of 42 MHz. It is designed for linear polarization and operates b/w 2400-2484 MHz, making it ideal for various wireless communication applications.
1733
Thales Components 1733 RF/Microwave Antenna with 1.4 VSWR, 250W power, and 16dB gain is ideal for GSM900 applications. It operates b/w -55°C to 65°C, offers a front-to-back ratio of 29dB, and dual polarization for base station/broadcast transmission needs. Beamwidth-E at 7.8° and wind rating of 125.268mph ensure reliable performance from 870-960MHz frequencies.
TSA5NA2K1G57NS001T
Taiyo Yuden
ANTENNA-OTHER;
1002295
The KYOCERA AVX 1002295 RF/Microwave Antenna has a VSWR of 2 and max power of 0.5W. It operates b/w 2400-2485 MHz, suitable for Bluetooth, cellular, WLAN applications with linear polarization. The module construction makes it ideal for mobile station antennas.
2108517-2
TE Connectivity
RF/Microwave Antennas; Mounting Feature: SURFACE MOUNT; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 2.5; Gain: 3 dB;
APAMS-121
Abracon's APAMS-121 is a 50 ohm coaxial mobile station antenna with 2dB gain and omni-directional linear polarization. It operates b/w 2350-2450 MHz, ideal for Bluetooth, GSM, and wireless applications. With a VSWR of 2, it can withstand temperatures from -45 to 85°C.
C30
Antenex
AEACAC053010-S868
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1461530100
Molex 1461530100 is an Omni-Directional RF Antenna for Bluetooth, IoT, WiFi, and Zigbee applications. Linear polarization with a frequency range of 2400-2483.5 MHz. Features adhesive mounting suitable for base station/broadcast transmission setups.
1461750001
Molex 1461750001 is an Omni-Directional RF antenna with 3dB gain. Linear polarization, operating from 2400MHz to 2483.5MHz. Ideal for Wireless/Zigbee applications due to its component construction and ANTENNA-OTHER type.
1461530200
BASE STATION/BROADCAST TRANSMISSION ANTENNA; Mounting Feature: ADHESIVE MOUNT; Minimum Operating Frequency: 2400 MHz; Construction: MODULE; Application: BLUETOOTH/IOT/WIFI/ZIGBEE; Additional Features: IT CAN ALSO OPERATE AT 4900-5930 MHZ;
1461860100
1461530300
BASE STATION/BROADCAST TRANSMISSION ANTENNA; Mounting Feature: PANEL MOUNT; Package Body Material: PLASTIC/EPOXY; Polarization: LINEAR; Minimum Operating Frequency: 2400 MHz; Omni-Directional: YES;
1461860200
1461860300
1461870100
1461870200
1461870300
1461860050
1461860250
1461870050
1461870250
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved