Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Median Price
$245.326
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Verical
1+ parts
$174.290
100+ parts
-
1k+ parts
10k+ parts
Master Electronics
$207.590
$195.370
Powell Electronics
$214.370
$201.760
Mouser Electronics
$238.920
$192.040
RS (Exports)
$251.731
RS Americas
$271.560
Newark
$273.280
Chip1Stop
$281.000
PEI Genesis
IBS Electronics
$207.290
$168.328
Digiode
$217.312
Nova Conductors
$227.370
VNN
Vyrian
AZTECH Wire
$11.798
Andel Nordic
$55.530
$38.870
Corphita
$205.875
Continental Prestige Electronics
$218.610
$214.238
Netroflash
$216.001
$211.454
Argo Parts USA
Assy Fe
Other Function Circular Connectors 1300080303 attributes and parameters. Explore more Other Function Circular Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
1300080303 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
206838-1
Tyco Electronics Amp
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Size: 23; MIL Conformity: NO; Mating Info.: 206837-1;
15544899
Delphi Connection Systems
CIRCULAR CONNECTOR; Manufacturer Series: 15544899;
1203410806
Molex
AHD10-9-96P
Amphenol
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
206430-1
TE Connectivity
TE Connectivity 206430-1 is a threaded circular connector with 600V rating, polyethylene insulator, and operating temperature range of -55 to 105°C. It has 4 contacts, UL flammability code of 94V-0, and polarization key for polarized connection. Ideal for applications requiring secure panel mounting and crimp termination in electrical systems up to 115/230VAC.
FGC.0B.304.CLAD42Z
Lemo Usa
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
2102352-2
The TE Connectivity 2102352-2 is a circular connector with an aluminum alloy shell, zinc nickel finish, and 8 contacts. It is a receptacle type connector suitable for applications requiring a mains connector rating of 115/230VAC. The connector features round pin sockets and is designed for polarization with one empty shell.
M12D-04PFFS-SH8001
CIRCULAR CONNECTOR; Manufacturer Series: M12D;
HDP24-24-29SE
TE Connectivity's HDP24-24-29SE is a circular connector with 29 contacts, rated at 250V and 25A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, UL-rated connector with solid backshell and panel mounting.
1641785
Phoenix Contact
The Phoenix Contact 1641785 is a threaded circular connector with gold-plated contacts. It features 4 male contacts and solid backshell for cable mounting. Ideal for applications requiring reliable signal transmission in industrial settings.
SV60
Lumberg Connect
SV60 by Lumberg Connect is a threaded circular connector with polyamide insulator, nickel-plated shell, and gold mating contact finish. It has 6 contacts, rated at 5A signal current, with 10000000000 ohm insulation resistance. Ideal for applications requiring reliable connections in commercial environments with temperatures ranging from -40 to 85°C.
1-967402-1
TE Connectivity 1-967402-1 is a threaded circular connector with 4 contacts, glass-filled PBT insulator, and rated voltage of 48V. It has a body size of 1.535" x 1.732" x 1.535", suitable for applications requiring male contact gender, panel mounting, and operating temperatures from -40°C to 120°C.
LF07WBR-3S
Hirose Electric
LF07WBR-3S by Hirose Electric is a circular connector with 3 contacts, gold termination finish, and threaded coupling. It is waterproof, made of zinc alloy with a nickel shell finish. Ideal for cable mounting applications requiring a female crimp contact in a size 7 receptacle shell.
206037-2
TE Connectivity's 206037-2 is a threaded circular connector with a body depth of 1.654 inch and rated voltage of 600V. It is commonly used in applications requiring a max operating temperature of 105°C, such as cable mounting for signal currents up to 34A.
LF07WBP-3S
LF07WBP-3S by Hirose Electric is a waterproof circular connector with 3 gold contacts. Featuring a threaded coupling type and nickel shell finish, it is ideal for cable mounting applications. With a zinc alloy shell material and male contact gender, this plug connector has a solid backshell and crimp termination type.
206038-4
TE Connectivity 206038-4 is a threaded circular connector with 28 contacts, rated at 250V and 7.5A. It features a black polyethylene insulator, UL flammability rating of 94V-0, and operates b/w -55 to 105°C. Ideal for panel mounting applications requiring a polarized female receptacle shell style.
UTS71419P
Souriau-sunbank Connection Technologies
FGG.1B.308.CLAD76Z
LF07WBP-6P(31)
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: GOLD; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4;
HD34-24-31PT
TE Connectivity's HD34-24-31PT is a circular connector with 31 contacts, rated at 250V and 13A. With a body size of 1.647" x 2" x 1.875", it operates b/w -55°C to 125°C. This polarized male connector made of aluminum alloy is ideal for panel mounting applications requiring solid backshell protection and strain relief.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1300170008
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1300080234
CIRCULAR CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
1300061679
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1300061171
CIRCULAR CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1300080161
1300061583
1300170015
CIRCULAR CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1300061656
1300080325
1300140050
1300170029
CIRCULAR CONNECTOR; Option: GENERAL PURPOSE; Backshell Type: SOLID; IEC Conformity: NO; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
1300140078
1300061349
1300170020
1300700024
130006-1163
1300061675
1300061700
1300240200
CIRCULAR CONNECTOR;
1300080104
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved