Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAINS POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
Median Price
$60.000
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$49.830
100+ parts
$42.860
1k+ parts
-
10k+ parts
Verical
$51.760
$42.010
Newark
$64.960
$54.470
Mouser Electronics
$65.740
$50.880
DigiKey
$70.410
$50.885
RS Americas
$78.300
$68.900
Chip1Stop
Master Electronics
$53.930
Farnell
Powell Electronics
$55.690
Vyrian
$51.830
Carlton-Bates
$53.470
Digiode
$53.856
TestEquity
$64.090
VNN
Nova Conductors
IBS Electronics
$46.689
TME
$43.150
Andel Nordic
$32.590
$22.810
Semicontronic
$40.620
$39.604
$39.401
Corphita
$51.021
Argo Parts USA
Continental Prestige Electronics
Aranea Global
Perfect Parts
Mains Power Connectors 1300060905 attributes and parameters. Explore more Mains Power Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
1300060905 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Equipment Transfer 08/Jul/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Components
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
Taitron Components
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
International Devices
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
IL13-CH1-H05-3100-200
Schaffner Holding Ag
IL13-CH1-H05-3100-200 by Schaffner Holding Ag is a SNAP mains power connector with dimensions 1.811" x 1.378" x 1.831". It operates b/w -25°C to 85°C, has 3 contacts, and supports up to 10A at 250VAC. Ideal for panel mounting applications requiring male solder termination according to CSA and CQC standards.
PX0686/WH
Bulgin
Bulgin PX0686/WH is a mains power connector with 3 contacts, rated at 10A, 250VAC. Featuring nickel termination contact finish and snap coupling type, it is ideal for cable mounting applications requiring IEC conformity. The connector's brass contact material and polyamide insulator make it suitable for male contact gender in various electrical setups.
5200.1043.1
Schurter Ag
The Schurter Ag 5200.1043.1 is a SNAP mains power connector with POLYETHYLENE insulator material and IEC conformity. Featuring 3 contacts, it has a rating of 10A at 125/250VAC for panel mounting applications with quick connect termination suitable for male connectors.
1210120107
Molex
Molex 1210120107 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40 to 70°C and features solder termination for panel mounting. Ideal for applications requiring reliable male connectors in electrical systems.
PM0S0SS3A
TE Connectivity
TE Connectivity's PM0S0SS3A is a mains power connector with 115/230VAC rating. It operates b/w -10 to 40°C, featuring a straight mounting style for panel installation. The connector includes an empty shell and is ideal for various applications requiring reliable power connections.
1210120013
Molex 1210120013 is a SNAP mains power connector with 4 contacts, rated at 10A, 250VAC/300VDC. It operates b/w -40 to 70 °C and has a male solder termination type. Ideal for panel mounting applications requiring reliable power connections.
1211606
Phoenix Contact
MAINS POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
10CS1
Corcom
MAINS POWER CONNECTOR; Contact Gender: MALE; Coupling Type: SNAP; Total No. of Contacts: 3; MIL Conformity: NO; Mounting Type: PANEL;
4300.0703
The Schurter Ag 4300.0703 is a mains power connector with SNAP coupling type, suitable for 15A, 125/250VAC applications. Featuring nickel termination contact finish and polyethylene insulator material, it has a total of 3 contacts and female contact gender. Ideal for cable mounting with IDC termination type, this socket connector is reliable for various electrical connections.
4302.2001
The Schurter Ag 4302.2001 is a mains power connector with snap coupling, polyethylene insulator, and tin/tin copper termination. It has 3 contacts, quick connect termination, and a rating of 10/15A at 250VAC. Ideal for panel mounting applications requiring IEC conformity.
17620
Volex Plc
17620 by Volex Plc is a SNAP mains power connector with 3 contacts, rated at 13A/125V. It features FEMALE contact gender and cable mounting type. Ideal for applications requiring reliable power connections in various electronic devices.
281316
Legrand
MAINS POWER CONNECTOR;
3266
Mennekes Elektrotechnik & Kg
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mains Connector Rating: 32A/400V; Mating Contact Finish: NOT SPECIFIED; Total No. of Contacts: 5;
IL13-SE-H05-3100-200
MAINS POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 85; Reference Standard: CSA; CQC; Total No. of Contacts: 3;
DD11.0124.1110
DD11.0124.1110 by Schurter Ag is a mains power connector with SNAP coupling, POLYETHYLENE insulator, and 10A, 250VAC rating. It is IEC conformant, suitable for panel mounting applications in temperatures ranging from -25 to 85°C. Ideal for use in various electronic devices requiring reliable power connections.
PM0S0DH3B
TE Connectivity's PM0S0DH3B is a mains power connector with 115/230VAC rating. It operates b/w -10°C to 40°C, featuring a straight mounting style and an empty shell design. Ideal for applications requiring reliable power connections in various electronic devices.
DD11.0114.1111
Schurter Ag's DD11.0114.1111 is a mains power connector with SNAP coupling, POLYETHYLENE insulator, and 10A, 250VAC rating. Ideal for panel mounting applications in various industries due to its CSA/CUL standards compliance and temperature range of -25 to 85°C.
GSP1.8103.1
Schurter Ag's GSP1.8103.1 is a SNAP coupling type mains power connector with POLYETHYLENE insulator material. It has 3 contacts, rated at 10/15A, 250VAC for quick connect termination. Ideal for panel mounting applications requiring IEC conformity and male contact gender.
4302.2101
Schurter Ag's 4302.2101 is a mains power connector with SNAP coupling, POLYETHYLENE insulator, and 10/15A, 250VAC rating. Ideal for panel mounting applications, it has a body size of 1.75" x 0.118" x 1.003" and operates b/w -25 to 70°C temperatures.
1EGG1-1
1EGG1-1 by TE Connectivity is a SNAP mains power connector with 3 contacts, suitable for 115/230VAC. It has a temperature range of -10 to 40°C and features solder termination. Ideal for panel mounting applications requiring a right angle male connector.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1300170023
MAINS POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
130017-0004
MAINS POWER CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 130017; Contact Material: NOT SPECIFIED;
1300060091
MAINS POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
1300060737
MAINS POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1300060232
1300170011
1300060159
1300060221
Molex 1300060221 is a threaded mains power connector with gold contacts, PVC insulator, and 3 female contacts. Rated at 13A, 600V, it is ideal for cable mounting applications requiring reliable power connections.
1300060088
1300060102
1300060105
1300060108
1300060162
MAINS POWER CONNECTOR; Contact Material: NOT SPECIFIED; Manufacturer Series: 130006; Mating Contact Finish: NOT SPECIFIED;
1300060254
1300060258
1300060422
1300060430
1300060436
1300060741
1300060744
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved