Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CIRCULAR DIN CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 12120; Contact Material: NOT SPECIFIED;
Median Price
$4.315
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$3.780
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$4.850
$3.860
$3.130
$3.030
DigiKey
$5.350
$3.862
$3.283
$3.078
Newark
$5.820
$4.350
$3.840
PEI Genesis
Chip1Stop
$3.100
Verical
$2.850
Nova Conductors
$2.456
Digiode
$2.565
VNN
Vyrian
IBS Electronics
$3.927
TME
$2.800
$2.520
Resion
Semicontronic
$2.290
$2.233
$2.221
Corphita
$2.430
Argo Parts USA
Aztec Data Supply Inc.
$2.827
Continental Prestige Electronics
$3.310
$2.070
$1.720
Andel Nordic
$56.800
$39.760
Perfect Parts
Netroflash
$2.407
$2.333
$2.284
Robosynatics
$10.234
Lucentia Tech
Assy Fe
DIN Connectors 1212050001 attributes and parameters. Explore more DIN Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Contact Material:
Manufacturer Series:
1212050001 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.20
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Comchip Technology
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
Surge Components
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
Dc Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
MD-60SN
Cui
MD-60SN by Cui is a circular DIN connector with EMI shielding, suitable for applications requiring 2A signal current. Featuring a nickel shell finish and glass-filled polyamide insulator material, it offers durability of 4000 cycles. With a temperature range from -20 to 105°C, this connector has a total of 6 contacts and is UL certified.
9906190006
Franz Binder &
CIRCULAR DIN CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
MD-60SV
Cui Devices
CIRCULAR DIN CONNECTOR; Termination Contact Finish: Silver (Ag); JESD-609 Code: e4;
1-828815-1
TE Connectivity
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Total No. of Contacts: 2; IEC Conformity: NO;
CAR3SC68-001
CAR3SC68-001 by TE Connectivity is a DIN Connector with dimensions 2.1"x2.44"x2.2". Made of GLASS FILLED POLYAMIDE, it operates b/w -40°C to 85°C. Suitable for applications requiring FEMALE contact gender, PANEL mounting, and 115/230VAC mains connector rating in accordance with DIN standards.
RM15WTLP-12P(72)
RM15WTLP-12P(72) by Hirose Electric is a circular DIN connector with 12 contacts and a rated current of 5A. It has an insulation resistance of 1GΩ, dielectric withstand voltage of 1000VAC, and can operate in temperatures ranging from -25°C to 85°C. This connector is commonly used in commercial applications requiring reliable and durable connections.
1212040007
Molex
CIRCULAR DIN CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
121583-0013
Itt Cannon
ITT Cannon 121583-0013 is a Circular DIN Connector with Crimp Termination, Female Contact Gender, and DIN Standard 72585. It is a Cable-mounted Plug suitable for various applications in industries like automotive, aerospace, and telecommunications.
9901351003
CIRCULAR DIN CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
MD-60SM
MD-60SM by Cui is a Circular DIN Connector with 6 contacts, suitable for board mounting and solder termination. It conforms to the DIN standard and features a right-angle mounting style. Ideal for applications requiring secure female connectors in compact spaces.
MD-60J
The Cui MD-60J is a Circular DIN Connector with 6 contacts, made of Copper Alloy shell material. It has an Insulation Resistance of 50M ohm and Dielectric Withstanding Voltage of 250VAC. Ideal for commercial applications, it operates b/w -20 to 105°C temperature range.
NC3FD-H
Neutrik Ag
Neutrik Ag's NC3FD-H is a circular DIN connector with 3 contacts, rated for 6A signal current. It features a durable zinc alloy shell, bronze contacts with AG ON NI finish, and solder termination. With DIN conformance and polarization key, it's ideal for board mounting applications requiring reliable connections in commercial settings.
5749265-1
Tyco Electronics Amp
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; JESD-609 Code: e0; MIL Conformity: NO;
MD-60PL100
CIRCULAR DIN CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 250VAC; Body Depth: .579 inch;
013204
Lumberg Connect
Lumberg Connect 013204 is a DIN Circular Connector with EMI shielding, rated at 4A signal current. Featuring silver termination contacts and ABS insulator material, it conforms to DIN standards and operates b/w -20°C to 85°C. Ideal for commercial applications requiring reliable male connectors with solder termination.
1470388-1
CIRCULAR DIN CONNECTOR; Contact Material: NOT SPECIFIED; Manufacturer Series: 1470388; Mating Contact Finish: NOT SPECIFIED;
121583-0058
ITT Cannon's 121583-0058 is a circular DIN connector with 37 contacts, TIN/GOLD finish, and crimp termination. Compliant with DIN standard 72585, it is ideal for cable mounting applications requiring a female contact gender in a straight plug configuration.
5749231-1
TE Connectivity's 5749231-1 is a DIN Connector with EMI shielding, suitable for board mounting with solderable retention clips. Featuring insulation resistance of 1000000000 ohm, it has a temperature range from -55 to 105 °C and durability of 100 cycles. Ideal for commercial applications requiring a reliable circular DIN connector with female contact gender.
MD-S9100-10(LF)(SN)
J S T Mfg
J S T Mfg's MD-S9100-10(LF)(SN) is a EMI shielded circular DIN connector with 9 contacts. It features phosphor bronze contact material, gold flash over nickel mating finish, and tin termination with nickel barrier. Ideal for board mounting applications requiring right angle receptacle connectors.
121583-0007
ITT Cannon's 121583-0007 is a Circular DIN Connector with 4 copper alloy contacts, TIN finish, and crimp termination. Compliant with DIN standard 72585, it is ideal for cable and panel mounting applications requiring reliable male contact connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1212010001
CIRCULAR DIN CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
1212110192
CIRCULAR DIN CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
121207-0005
CIRCULAR DIN CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 121207; Contact Material: NOT SPECIFIED;
1212050005
1212070004
1212010002
CIRCULAR DIN CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1212020001
1212010003
1212020002
1212040001
CIRCULAR DIN CONNECTOR; Manufacturer Series: 12120; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1212040005
CIRCULAR DIN CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
1212050009
CIRCULAR DIN CONNECTOR; Manufacturer Series: 12120; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
1212070001
CIRCULAR DIN CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
1212070368
1212070397
121208-0160
CIRCULAR DIN CONNECTOR; Manufacturer Series: 121208; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
121208-0243
CIRCULAR DIN CONNECTOR; Contact Material: NOT SPECIFIED; Manufacturer Series: 121208; Mating Contact Finish: NOT SPECIFIED;
1212090047
1212090050
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved