Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY;
Median Price
$3.070
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Verical
1+ parts
$2.360
100+ parts
-
1k+ parts
$2.190
10k+ parts
Mouser Electronics
$5.000
$3.600
$3.060
$2.870
DigiKey
$5.320
$3.839
$3.264
Powell Electronics
$2.520
$2.330
Chip1Stop
Nova Conductors
$2.194
Digiode
$4.550
VNN
Vyrian
IBS Electronics
$2.592
$2.544
TME
$2.030
$1.990
Continental Prestige Electronics
$2.150
Argo Parts USA
Netroflash
Corphita
$4.311
AZTECH Wire
$13.405
Andel Nordic
$45.570
$31.898
EMSNET (Excess)
Assembly Products 1212010005 attributes and parameters. Explore more Assembly Products devices from Molex
Connector Accessory Type:
1212010005 Connector Accessories trade compliance attributes, and parameters.
NSN
3040-12-186-6494, 3040121866494
NIIN
121866494
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1554216002
Molex
WIRE AND CABLE;
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
Multicomp Pro
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
170366-1
TE Connectivity
TE Connectivity's 170366-1 plug housing features a stranded construction with crimp terminals, rated for 600V and 7A. Suitable for discrete wire applications, it has a brass design with female contacts and operates b/w -20 to 105°C.
221-525/000-004
Wago
TERMINAL BLOCK ACCESSORY;
WM-12S
TE Connectivity's WM-12S, part of Assembly Products, is designed for DTM SERIES applications. With a temperature range of -55 to 125 °C, it accommodates wires up to 0 AWG. Made of POLYBUTYLENE TEREPHTHALATE, it serves as a POWER AND SIGNAL WEDGE ITEM.
0462-201-2031
TE Connectivity's 0462-201-2031 CONTACT features CRIMP terminal type, MACHINED contact design, and COPPER ALLOY material. With a rated current of 7.5A, it is ideal for applications requiring FEMALE contact gender and wire gauge up to 20 AWG. Operating temperature ranges from -55°C to 150°C make it suitable for various assembly products.
828986-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
DTM06-12SB-EE04
TE Connectivity's DTM06-12SB-EE04 is a FEMALE connector with 7.5A rated current and 250V DC voltage. It has a 0.053" to 0.12" cable entry range, operating from -55°C to 150°C. Ideal for POWER AND SIGNAL applications requiring reliable connections in harsh environments.
2CTC-R
Adam Tech
The Adam Tech 2CTC-R is a CRIMP terminal with a rated current of 2A and contact resistance of 20 mohm. It supports wire sizes from 28 to 22 AWG, ideal for applications requiring FEMALE contacts in straight mounting style with SQ PIN-SKT design. Operating temperatures range from -25°C to 85°C.
WM-6S
TE Connectivity's WM-6S is a power and signal assembly item designed for DTM SERIES. With a temp range of -55 to 125°C, it accommodates wires up to 0 AWG using polybutylene terephthalate material. Ideal for various applications requiring robust wire connections.
C01600V00001012
Amphenol
CONNECTOR ACCESSORY; Manufacturer Series: C016;
DE24657R
Japan Aviation Electronics Industry
CONNECTOR ACCESSORY; Manufacturer Series: DE24657R;
936012574
WP-4S
CONNECTOR ACCESSORY; Material: POLYETHYLENE; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO; DIN Conformity: NO; Usage: DTP SERIES;
DF13-2630SCFA(41)
Hirose Electric
5-968221-1
TE Connectivity 5-968221-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 AWG, rated for 7.5A current. Ideal for applications requiring female contact gender and operating temperatures from -40 to 120°C.
170204-2
TE Connectivity's 170204-2 CONTACT features CRIMP terminal type, rated voltage of 250V, and operating temperature up to 105°C. Ideal for SIGNAL applications with wire gauge ranging from 26 AWG to 20 AWG and a max current rating of 2A.
1-770904-1
TE Connectivity's 1-770904-1 plug housing has approvals from CSA and UL, rated for 600V with a max operating temp of 105°C. It features stranded construction, crimp terminals, and is designed for power applications with female contacts.
AWM-2PA
RJFTVC2G
CONNECTOR ACCESSORY; Approvals (V): UL; Maximum Operating Temperature: 85 Cel; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO;
WP-2P
CONNECTOR ACCESSORY; MIL Conformity: NO; Maximum Operating Temperature: 125 Cel; IEC Conformity: NO; Material: POLYETHYLENE; DIN Conformity: NO;
66570-8
TE Connectivity 66570-8 is a male signal contact with solder terminal type. It has a max operating temperature of 105°C and min of -55°C. Suitable for CPC connectors and Amplimite HDP-20, it features a finish thickness of 30 microns, wire gauge up to 18 AWG, and rated current of 3.1A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
12124582
Delphi Connection Systems
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Minimum Cable Entry: .075 inch; IEC Conformity: NO; Additional Features: CONTACT FINISH: TIN;
Aptiv
Aptiv 12124582 CONTACT is a CRIMP terminal made of COPPER ALLOY for FLRY-B cables. It has a 0.075-0.11 inch cable entry range, ideal for automotive wiring harness assembly. This Assembly Product offers precise and reliable connections in vehicle electrical systems.
12124580
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Material: BRASS; DIN Conformity: NO; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN;
Aptiv 12124580 is a CRIMP CONTACT with FEMALE ROUND PIN-SOCKET made of BRASS. It has 0.156" Max Cable Entry and STRAIGHT Mounting Style. Ideal for assembly products requiring reliable electrical connections.
12124075
CONNECTOR ACCESSORY; Terminal Length: .224 inch; IEC Conformity: NO; Mounting Style: STRAIGHT; MIL Conformity: NO; DIN Conformity: NO;
Aptiv's 12124075 CONTACT features FEMALE gender, CRIMP terminal type, and 0.079-0.094 inch cable entry. Ideal for STRAIGHT mounting in Assembly Products, with COMPRESSION contact style and 0.224" terminal length.
12129557
CONNECTOR ACCESSORY; Manufacturer Series: 12129557;
12124581
CONNECTOR ACCESSORY; Material: COPPER ALLOY; Additional Features: CONTACT FINISH: TIN; Terminal Type: CRIMP; DIN Conformity: NO; IEC Conformity: NO;
CONNECTOR ACCESSORY; MIL Conformity: NO; Additional Features: CONTACT FINISH: TIN; DIN Conformity: NO; Maximum Cable Entry: .118 inch; Cable Types: FLRY-B;
12129497
CONNECTOR ACCESSORY; IEC Conformity: NO; Cable Types: FLRY-B; Additional Features: CONTACT FINISH: TIN; Maximum Cable Entry: .118 inch; Assembly Item Name: CONTACT;
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Minimum Cable Entry: .106 inch; Assembly Item Name: CONTACT; Maximum Cable Entry: .118 inch; MIL Conformity: NO;
12129414
CONNECTOR ACCESSORY; Manufacturer Series: 12129414;
12129214
12129409
CONNECTOR ACCESSORY; Maximum Cable Entry: .094 inch; Assembly Item Name: CONTACT; Minimum Cable Entry: .087 inch; Material: COPPER ALLOY; DIN Conformity: NO;
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; Terminal Type: CRIMP; DIN Conformity: NO; MIL Conformity: NO; Material: COPPER ALLOY;
1212010034
CONNECTOR ACCESSORY; Manufacturer Series: 121201;
1212010047
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved