Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1200VAC; No. of Connectors: ONE; Mounting Type: BOARD;
Median Price
$0.825
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Verical
1+ parts
$0.850
100+ parts
-
1k+ parts
$0.800
10k+ parts
$0.730
Mouser Electronics
$1.030
$0.787
$0.642
$0.594
DigiKey
$0.680
$0.640
$0.580
Master Electronics
$0.755
$0.683
Chip1Stop
$0.896
$0.766
PEI Genesis
Powell Electronics
Vyrian
$0.455
Digiode
$0.808
IBS Electronics
$0.725
TME
$1.050
$0.890
$0.840
Corphita
$0.765
Andel Nordic
$8.037
$7.715
Perfect Parts
Assy Fe
EMSNET (Excess)
Authorized Procurement Solutions
Headers & Edge Type Connectors 104130-0310 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Dielectric Withstanding Voltage (V):
Durability:
Insulation Resistance:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
PCB Contact Pattern:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
104130-0310 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
NC7WZ07P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Surge Components
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Gulf Semiconductor
Diotec Semiconductor Ag
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
New Jersey Semiconductor Products
10124017-1022121LF
Amphenol Communications Solutions
Amphenol's 10124017-1022121LF is a board stacking connector with 21 contacts, gold flash termination finish, and liquid crystal polymer insulator. It has a mating contact pitch of 0.039", dielectric voltage withstand of 707VAC, and rated signal current of 1A. Ideal for applications requiring durable male connectors with staggered PCB mounting pattern.
M80-5102042
Harwin Plc
The Harwin PLC M80-5102042 is a 20-contact board connector with 0.079" mating contact pitch and 3A signal current rating. Featuring a glass-filled polyphenylene sulfide insulator, it operates b/w -55°C to 125°C, ideal for commercial applications requiring durability and reliability in PCB connections.
39-53-2165
Molex
Molex 39-53-2165 FFC/FPC Connector features 16 contacts with 0.049" pitch, 0.197" body width, and 0.386" depth. Ideal for PCB applications requiring a 1.9812mm row spacing, this UL-certified connector offers reliable solder termination in commercial settings.
B6B-ZR(LF)(SN)
J S T Mfg
B6B-ZR(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.059" pitch, GLASS FILLED POLYAMIDE66 insulator, and 500VAC dielectric voltage. It operates b/w -25 to 85 °C, suitable for applications requiring high insulation resistance and UL94V-0 flammability rating.
52559-2052
Molex 52559-2052 FFC/FPC connector with 20 contacts, 0.020" pitch, and 39u plating thickness. Ideal for PCB applications requiring a mating contact pitch of 2.794mm, operating temperature range from -40 to 85°C, and UL94V-0 flammability rating.
VHR-6N-M
VHR-6N-M by J S T Mfg is a 6-contact board connector with a mating contact pitch of 0.156". Featuring POLYAMIDE insulation, it has an operating temperature range of -25 to 85 °C. Ideal for commercial applications, this connector supports wire sizes from 22 to 18 AWG and offers high insulation resistance at 1000000000 ohm.
17211101102
Harting Electronics & Kg
17211101102 by Harting Electronics & Kg is a board connector with 110 female contacts in a right-angle mounting style. It features a mating contact pitch of 0.079", body length of 1.965", and termination contact finish of gold over nickel. Ideal for applications requiring high-density PCB connections with precise rectangular patterns and press-fit terminations.
823-22-010-10-000101
Mill-max Mfg
823-22-010-10-000101 by Mill-max Mfg is a 2-row board stacking connector with gold over nickel termination. Featuring 10 contacts on a 2.54mm pitch, it is UL94V-0 rated for high flammability resistance. Ideal for board mounting applications requiring male solder contacts in straight orientation.
357-074-442-278
Edac
Edac 357-074-442-278 is a CARD EDGE CONNECTOR with 74 contacts in 2 rows, featuring a 0.156" pitch and rated for 5A signal current. With UL certification, it has a temperature range of -40 to 105°C, suitable for applications requiring high insulation resistance and dielectric voltage withstand capabilities.
102694-3
TE Connectivity 102694-3 is a 2-row board connector with 10 contacts, rated at 3A for signal current. Featuring tin/lead termination, it has a mating contact pitch of 0.1" and operates b/w -65 to +105°C. Ideal for cable mounting applications requiring reliable female connectors with bellowed contact style.
S3B-PH-SM4-TB(LF)(SN)
S3B-PH-SM4-TB(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.079" pitch, 2A signal current, and 800VAC dielectric voltage. Ideal for applications requiring male connectors with surface mount termination and right angle mounting style.
22-28-4023
The Molex 22-28-4023 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring a dielectric voltage of 1500VAC and insulation resistance of 1Gohm, it offers reliable signal transmission at up to 4A current. With a durable design rated for 25 cycles, this male connector has a solder termination type and matte tin finish over nickel for optimal performance.
FTSH-105-01-L-DV-K-A
Samtec
Samtec's FTSH-105-01-L-DV-K-A is a 2-row, 10-contact board connector with a contact pitch of 1.27mm. It features gold mating contacts over nickel for reliability and operates b/w -55°C to 125°C. Ideal for commercial applications requiring a surface mount termination type on PCBs with rectangular contact patterns.
SSM-116-L-SV
SSM-116-L-SV by Samtec is a board connector with a mating contact pitch of 0.1 inch and insulation resistance of 5G ohm. It is commonly used in applications requiring high temperature resistance and surface mount termination.
B04B-PASK-1(LF)(SN)
B04B-PASK-1(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C. Featuring tin finish contacts and UL-rated insulation material, it offers high insulation resistance of 1000000000 ohm and dielectric voltage withstand of 800VAC. Ideal for PCB mounting with solder termination, this male connector has a contact resistance of 20 mohm and can handle up to 3A signal current.
5-146281-2
TE Connectivity 5-146281-2 is a board connector with mating contact pitch of 0.1". Featuring matte tin finish, it has insulation resistance of 5000000000 ohm and operates b/w -65 to 105 °C. Ideal for commercial applications, this male connector has a rated current of 3A and UL flammability rating of 94V-0.
ASP-134486-01
Samtec ASP-134486-01 is a 10-row, 400-contact board connector with 0.05" pitch and gold over nickel finish. It features liquid crystal polymer insulator, surface mount termination, and polarized housing for commercial applications requiring high reliability.
BM03B-SRSS-TBT(LF)(SN)
BM03B-SRSS-TBT(LF)(SN) by J S T Mfg is a 3-contact BOARD CONNECTOR with COPPER ALLOY contacts, TIN finish, and 94V-0 UL rating. Ideal for surface mount applications in headers & edge type connectors.
BM08B-GHS-TBT(LF)(SN)(N)
BM08B-GHS-TBT(LF)(SN)(N) by J S T Mfg is an 8-contact board connector with TIN over copper finish. It features phosphor bronze contact material, UL 94V-0 flammability code, and 1.25mm terminal pitch for surface mount termination. Ideal for applications requiring male gender connectors in straight mounting style on circuit boards.
1025
Keystone Electronics
PCB CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; MIL Conformity: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved