Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 08-56-0105 CONTACT features CRIMP terminals for 24-18 AWG wires, 0.11" cable entry, and FEMALE gender. Ideal for applications in 2139, 3001, and 3069 assemblies requiring BRASS material and CHAIN contact design.
Median Price
$0.245
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Compona
1+ parts
$0.120
100+ parts
$0.110
1k+ parts
10k+ parts
-
Arrow
$0.235
$0.224
Farnell
$0.477
$0.366
$0.334
DigiKey
$0.760
$0.525
$0.420
Element14
$1.210
$0.657
$0.568
Heilind Electronics
$0.137
Mouser Electronics
$0.230
RS (Exports)
$0.462
TTI
$0.162
Verical
Powell Electronics
$0.192
TTI Europe
$0.215
Chip1Stop
$0.349
$0.343
Interstate Connecting
$0.447
$0.375
$0.354
Newark
$0.300
$0.225
Digiode
$0.114
Nova Conductors
$0.324
Rapid Electronics
$990.803
VNN
DF Sales Co.
Vyrian
IBS Electronics
$0.142
Inventory MP
Bristol Electronics
LIBRA Elektronik GmbH
Electronic Treasures
Mil-Aero Solutions, Inc.
Mentor Electronics Marketing, LLC
Vicor Industries, Inc.
Corphita
$0.108
Netroflash
$0.308
$0.302
Continental Prestige Electronics
$0.392
Perfect Parts
Kepictronics
Authorized Procurement Solutions
Assy Fe
Lee Johnson Sales, Inc.
Argo Parts USA
Formix International (Excess)
This product is versatile and can be used in various applications.
The finish thickness of 15 ensures durability and longevity of the product.
Crimp terminal type provides a secure and reliable connection.
Chain contact design offers efficient electrical conductivity.
The assembly item name indicates that this product is specifically designed for contact applications.
Supports a minimum wire size of 24 AWG, ensuring compatibility with a wide range of wire gauges.
Can accommodate larger wire sizes up to 18 AWG for more robust connections.
Allows for easy entry of cables with a maximum diameter of 0.11 inch.
Specifically designed for female contacts, providing a secure and reliable connection.
Straight mounting style makes it easy to install and use in various assemblies.
Made of brass, a durable and conductive material that ensures high performance and longevity.
Assembly Products 08-56-0105 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
08-56-0105 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Design/Specification - Mult Devs Terminal Retention Force 11/Nov/2021
PCN Packaging - Packaging Changes 05/Sep/2018 Packaging Specification Changes 05/Sept/2018
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
1554216002
Molex
WIRE AND CABLE;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
North American Philips Discrete Products Div
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MTCB1X-XXX-105
TE Connectivity
CONNECTOR ACCESSORY; Contact Gender: MALE; Maximum Wire Size: 0 AWG;
9028240000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Approvals (V): CSA; GOST; Assembly Item Name: FERRULE-STEPPED; DIN Conformity: NO; IEC Conformity: NO;
12089040
Delphi Connection Systems
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; Maximum Cable Entry: .075 inch;
DF11-2428SCFA(04)
Hirose Electric
CONNECTOR ACCESSORY;
SYM-001T-P0.6
J S T Mfg
SYM-001T-P0.6 by J S T Mfg is a UL approved RCY CONNECTOR with CRIMP terminals. It supports 3A current, rated for 250V AC/DC, and has contact resistance of 20 mohm. Ideal for applications requiring male contacts, it accommodates wire sizes from 28 to 22 AWG with operating temperatures ranging from -25 to 85 °C.
1010-009-0206
181270-2
TE Connectivity's 181270-2 CONTACT features CRIMP terminal type, rated voltage of 40V, and wire gauge of 23 AWG. Ideal for SIGNAL applications with a max operating temperature of 80°C and contact resistance of 7 mΩ.
08-50-0105
Molex 08-50-0105 contact features CRIMP terminal type, CHAIN contact design, and BRASS material. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 2139, 3001, and 3069 assemblies. Suitable for FEMALE contacts with a 0.11 inch cable entry.
DTM06-3S-C017
TE Connectivity's DTM06-3S-C017 is a FEMALE connector with 7.5A rated current and 250V DC voltage. It has a 0.053" to 0.12" cable entry range, ideal for POWER AND SIGNAL applications. With an operating temperature range of -55°C to 125°C, it ensures reliable performance in various environments.
42815-0012
Molex 42815-0012 CONTACT features CRIMP terminal for 12-10 AWG wires. Made of COPPER ALLOY, it has 0.209" cable entry and suits FEMALE connectors in STRAIGHT mount. Ideal for applications requiring durable bellowed-type contacts with 30 finish thickness.
33001-3004
Molex 33001-3004 CONTACT features CRIMP terminal type for 20-18 AWG wire sizes. FEMALE gender, BELLOWED TYPE contact style with STRAIGHT mounting. Ideal for assembly products requiring 30 finish thickness in various applications.
SYM-001T-P0.6(N)
SYM-001T-P0.6(N) by J S T Mfg is a CRIMP terminal with approvals from TUV and UL. It supports wire sizes from 28 AWG to 22 AWG, rated for 3A current at 250V AC/DC. Ideal for applications requiring male contacts in straight mounting style with operating temperatures ranging from -25°C to 85°C.
7816.6557.0
CC81L-2426-01-L
Samtec
CC81L-2426-01-L by Samtec is a female contact with crimp terminal type, suitable for ISD2 SERIES HOUSING. It features 10 finish thickness, accommodates wire sizes from 26 AWG to 24 AWG, and has a straight mounting style. Made of beryllium copper, it is ideal for various assembly applications.
AW8P
Amphenol
249-116
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: END PLATE; IEC Conformity: NO; Usage: TERMINAL BLOCK;
WP-4P
WP-4P by TE Connectivity is an Assembly Product designed for DTP SERIES applications. It features a temperature range of -55 to 125°C, supports wire sizes up to 0 AWG, and is made of Polybutylene Terephthalate. Ideal for power and signal connections in various industries.
1062-14-0122
TE Connectivity's 1062-14-0122 is a CRIMP terminal with stamped contact design. It supports wire gauge 14-18 AWG, rated for 13A current. Ideal for applications requiring female contact gender, straight mounting style, and round pin-socket contact design.
08-70-0069
Molex 08-70-0069 CONTACT features CRIMP terminal type, BRASS material, and 0.186" terminal length. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and COMPRESSION contact design in assemblies with wire sizes ranging from 28 AWG to 22 AWG.
SPUD-001T-P0.5
SPUD-001T-P0.5 by J S T Mfg is a UL approved CONTACT with CRIMP terminal type, rated for 250V AC/DC, 3A current. Ideal for applications requiring FEMALE contacts with wire sizes ranging from 26-22 AWG and operating temperatures of -25 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
08-56-0110
Molex 08-56-0110 CONTACT features CRIMP terminals for 30-22 AWG wires. Made of BRASS, it has a 0.186" length and 0.062" cable entry. Ideal for STRAIGHT mounting in Assembly Products applications.
08-56-0109
The Molex 08-56-0109 is a crimp terminal contact with a finish thickness of 15. It is designed for use with 30 AWG to 22 AWG wires and has a max cable entry of 0.062 inch. This female contact is made of brass and features compression-style contact design, making it suitable for various assembly applications.
08-56-0106
Molex 08-56-0106 CONTACT features CRIMP terminals for FEMALE contact gender. It supports wire sizes from 24 AWG to 18 AWG with a finish thickness of 15. Ideal for applications in industries like automotive, telecommunications, and electronics.
08-56-0124
CONNECTOR ACCESSORY; Maximum Wire Size: 22 AWG; Terminal Type: CRIMP; Maximum Cable Entry: .065 inch; Contact Style: BELLOWED CONTACT; Contact Gender: FEMALE;
08-56-0139
CONNECTOR ACCESSORY; Rated Current: 5 A; Contact Resistance: 6 mohm; Terminal Type: CRIMP; Rated AC Voltage: 250 V; MIL Conformity: NO;
08-56-0-0105
CONNECTOR ACCESSORY; MIL Conformity: NO; Terminal Length: .213 inch; Mounting Style: STRAIGHT; Contact Gender: FEMALE; Maximum Wire Size: 18 AWG;
08-56-0-0106
CONNECTOR ACCESSORY; MIL Conformity: NO; Material: PHOSPHOR BRONZE; Maximum Wire Size: 18 AWG; Mounting Style: STRAIGHT; Maximum Cable Entry: .118 inch;
08-56-0-0153
CONNECTOR ACCESSORY; Minimum Wire Size: 24 AWG; Usage: 2574 , 2139 AND 41695; Terminal Type: CRIMP; Contact Gender: FEMALE; Material: PHOSPHOR BRONZE;
08-56-0-0154
CONNECTOR ACCESSORY; Contact Design: LOOSE; Minimum Cable Entry: .1 inch; Maximum Wire Size: 18 AWG; Contact Gender: FEMALE; Usage: 2574 , 2139 AND 41695;
08-56-0187
CONNECTOR ACCESSORY; Usage: 6345, 41695; IEC Conformity: NO; Mounting Style: STRAIGHT; Maximum Wire Size: 18 AWG; Material: BRASS;
08-56-0188
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; IEC Conformity: NO; Minimum Wire Size: 22 AWG; Contact Style: COMPRESSION; Maximum Cable Entry: .11 inch;
08-56-0107
CONNECTOR ACCESSORY; Maximum Cable Entry: .65 inch; Material: BRASS; Contact Gender: FEMALE; Maximum Wire Size: 22 AWG; Mounting Style: STRAIGHT;
08-56-0108
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Material: BRASS; DIN Conformity: NO; Terminal Type: CRIMP; Contact Gender: FEMALE;
08-56-0133
CONNECTOR ACCESSORY; Material: BRASS; IEC Conformity: NO; Finish Thickness: 100; Assembly Item Name: CONTACT; Contact Style: BELLOWED TYPE;
08-56-0135
CONNECTOR ACCESSORY; Maximum Wire Size: 18 AWG; MIL Conformity: NO; DIN Conformity: NO; Contact Style: BELLOWED TYPE; Minimum Wire Size: 20 AWG;
08-56-0137
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Finish Thickness: 100; Material: BRASS; Mounting Style: STRAIGHT;
08-56-0153
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Assembly Item Name: CONTACT; Mounting Style: STRAIGHT; Contact Style: COMPRESSION; Usage: 2139 SERIES CONNECTOR;
08-56-0154
CONNECTOR ACCESSORY; Maximum Cable Entry: .118 inch; Minimum Wire Size: 24 AWG; Contact Style: COMPRESSION; Minimum Cable Entry: .1 inch; Material: BRASS;
08-56-0181
CONNECTOR ACCESSORY; MIL Conformity: NO; Contact Design: CHAIN; Maximum Cable Entry: .065 inch; DIN Conformity: NO; Minimum Wire Size: 26 AWG;
08-56-0182
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Contact Gender: FEMALE; IEC Conformity: NO; Terminal Type: CRIMP; Mounting Style: STRAIGHT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved