Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Manufacturer Series: 851;
Median Price
$17.165
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$14.200
100+ parts
$11.040
1k+ parts
$8.750
10k+ parts
-
PSC Electronics
DigiKey
$20.180
$15.183
$13.005
Nova Conductors
$7.919
Vyrian
VNN
Continental Prestige Electronics
$7.761
Netroflash
$7.523
$7.365
AZTECH Wire
$13.437
Ampacity Inc.
$14.590
Argo Parts USA
Headers & Edge Type Connectors 851-11-007-40-001000 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Mill-max Mfg
Connector Type:
Mating Contact Finish:
Contact Material:
Manufacturer Series:
851-11-007-40-001000 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Mill-Max Mfg. Corp. is a vertically integrated engineering and manufacturing company capable of producing over 100 million interconnect components a week, making us the largest manufacturer of precision machined interconnect components in North America.
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
22-28-5123
Molex
The Molex 22-28-5123 is a board connector with 12 contacts, rated at 4A signal current. It features a mating contact pitch of 0.1", insulation resistance of 50Gohm, and dielectric voltage withstand of 1500VAC. Ideal for commercial applications requiring durable connectors with solder termination and rectangular PCB contact pattern.
DTM04-3P-E003
TE Connectivity
TE Connectivity's DTM04-3P-E003 is a 1.68"x.816"x.638" board connector with GLASS FILLED POLYAMIDE insulator, UL 94V-0 rated for 250V/7.5A signal current at -55 to 125°C. Ideal for cable mounting applications requiring polarized male contacts and strain relief option.
M20-9990446
Harwin Plc
The Harwin PLC M20-9990446 is a board connector with 0.1" mating contact pitch, 3A signal current rating, and -40 to 105°C operating temperature range. It is ideal for commercial applications requiring a durable male receptacle with solder termination and UL flammability rating of 94V-0.
351-80-139-00-004101
Preci-dip Sa
351-80-139-00-004101 by Preci-dip Sa is a BOARD CONNECTOR with 39 contacts, BRASS material, and TIN finish. It has a terminal pitch of 2.54mm and UL Flammability Code of 94V-0. Ideal for applications requiring reliable male connectors on circuit boards with solder termination.
3-640440-2
TE Connectivity 3-640440-2 is a board connector with 0.1" pitch, suitable for stranded cables. It features POLYAMIDE insulation, COPPER ALLOY contacts, and 5A signal current rating. Ideal for commercial applications requiring durable connectors with locking mounting options.
M20-9990245
M20-9990245 by Harwin PLC is a board connector with 0.1" mating contact pitch, 3A signal current rating, and 750VAC dielectric voltage. Ideal for commercial applications, it features gold-plated contacts, polyamide insulator, and operates b/w -40°C to 105°C temperature range.
09185106324
Harting Electronics & Kg
09185106324 by Harting Electronics & Kg is a Headers & Edge Type Connector with Mating Contact Pitch of 0.1", Insulation Resistance of 1000000000 ohm, and Body Length of 0.807". It is used in BOARD EURO CONNECTOR applications, featuring POLARIZED HOUSING for polarization key and SOLDER termination type for durability.
2023960407
Molex 2023960407 is a board connector with 0.039" mating contact pitch, 100000000 ohm insulation resistance, and 250VAC dielectric voltage. Ideal for applications requiring male connectors with right-angle mounting style and surface mount termination.
VHR-8N
J S T Mfg
VHR-8N by J S T Mfg is a 0.156" pitch BOARD CONNECTOR with 8 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. Ideal for cable mounting applications, it has a temperature range of -25 to 85°C and UL94V-0 flammability rating.
1761606-3
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Manufacturer Series: 1761606; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
S3B-PH-K-S(LF)(SN)
S3B-PH-K-S(LF)(SN) by J S T Mfg is a 3-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C and insulation resistance of 1Gohm. It features brass contacts with tin over copper finish, press-fit termination, and a UL flammability rating of 94V-0.
FTSH-107-01-L-DV-K-A-P-FR
Samtec
FTSH-107-01-L-DV-K-A-P-FR by Samtec is a 2-row, 14-contact board connector with a terminal pitch of 1.27mm. It features surface mount termination and a tin finish with nickel barrier. This connector is commonly used in applications requiring male contact gender and straight mounting style.
SM02B-SRSS-TB(LF)(SN)
SM02B-SRSS-TB(LF)(SN) by J S T Mfg is a 2-contact board connector with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCB applications requiring male contacts, surface mount termination, and right-angle mounting.
FTSH-105-01-F-DV-K-A-TR
Samtec's FTSH-105-01-F-DV-K-A-TR is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". It features phosphor bronze contacts with gold flash over nickel finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable connections in temperatures ranging from -55°C to 125°C.
TFM-110-01-S-D-RE1-WT
Samtec TFM-110-01-S-D-RE1-WT is a 20-contact board stacking connector with 0.05" pitch, ideal for commercial applications. Features include matte tin termination, liquid crystal polymer insulator, and gold mating contact finish. With a temperature range of -55 to 125°C, it offers reliable signal transmission in various electronic devices.
M80-5102042
The Harwin PLC M80-5102042 is a 20-contact board connector with 0.079" mating contact pitch and 3A signal current rating. Featuring a glass-filled polyphenylene sulfide insulator, it operates b/w -55°C to 125°C, ideal for commercial applications requiring durability and reliability in PCB connections.
EHR-2
EHR-2 by J S T Mfg is a BOARD CONNECTOR with 0.098" pitch, 3A signal current, and 800VAC dielectric voltage. It has POLYAMIDE66 insulation, operates b/w -25 to 85 °C, and UL94V-0 flammability rating. Ideal for CABLE mounting applications requiring high contact resistance and locking feature.
FTSH-105-01-L-DV-K-A-P-FR
Samtec's FTSH-105-01-L-DV-K-A-P-FR is a 10-contact, 2-row male board connector with tin finish. Featuring a 1.27mm pitch, it is surface mountable and UL94V-0 rated. Ideal for applications requiring straight mounting of edge type connectors.
834-47-053-10-001000
Mill-max Mfg
BOARD CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: GOLD;
17211102101
17211102101 by Harting Electronics & Kg is a BOARD CONNECTOR with 110 contacts, GOLD OVER NICKEL finish, and GLASS FILLED POLYETHYLENE insulator. It has a Mating Contact Pitch of 0.079", operates b/w -55 to 125 °C, and offers durability up to 250 cycles. Ideal for applications requiring high insulation resistance and reliable signal current of 1A in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
851-13-020-10-003000
BOARD CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved