Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.13-0.28V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Prism Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
Magnetic Field Sensors HAL506SF-E attributes and parameters. Explore more Magnetic Field Sensors devices from Micronas Semiconductor Holding Ag
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Housing:
Hysteresis:
Input Mode:
JESD-609 Code:
Maximum Magnetic Field Range:
Minimum Range Of Magnetic Field:
Mounting Feature:
No. of Terminals:
Maximum Operating Current:
Output (V):
Maximum Output Current:
Output Polarity:
Output Range:
Output Type:
Package Body Material:
Package Equivalence Code:
Package Shape or Style:
Power Supplies (V):
Resistance:
Sensors or Transducers Type:
Sub-Category:
Technology:
Terminal Finish:
Termination Type:
TDK-Micronas is the center of competence for magnetic-field sensors and CMOS integration within the TDK group. TDK-Micronas has gained operational excellence for sensors and actuators production in over 25 years of in-house manufacturing. It has been the first company to integrate a Hall-effect based sensor into CMOS technology in 1993. Since then, TDK-Micronas has shipped over six billion Hall sensors to the automotive and industrial market. The operational headquarters are located in Freiburg im Breisgau (Germany). Currently, TDK-Micronas employs around 1,000 people.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Temic Semiconductors
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
1554216004
Molex
WIRE AND CABLE;
TLE49642MXTMA1
Infineon Technologies
Infineon's TLE49642MXTMA1 is a Hall effect magnetic field sensor with 32V max supply voltage, 5.5mT hysteresis, and 0-25mA output range. Ideal for applications requiring precise current output sensing in a compact rectangular package.
2SS52M-T2
Honeywell Sensing And Control
2SS52M-T2 by Honeywell is a magnetic field sensor with single-ended output circuit. It operates b/w -40 to 150°C, with a max current of 11mA and output range of 20mA. Ideal for applications requiring precise magnetic field detection in compact spaces.
BIM-UNT-AP6X-0.3-PSG3M
Hans Turck & Kg
MAGNETIC FIELD SENSOR,MAGNETORESISTIVE;
ARS19510LUBBTN-FSWPHUJ
Allegro MicroSystems
Magnetic Field Sensors;
TMAG5273A1QDBVR
TMAG5273A1QDBVR by Texas Instruments is a 6-terminal magnetic field sensor with voltage output range of 0-5.5V, ideal for Hall effect applications. It operates b/w -40 to 125°C, with max supply voltage of 3.6V and output current up to 2A. Suitable for surface mount installations in various electronic devices.
A1104LLHLT-T
Allegro MicroSystems' A1104LLHLT-T is a Hall effect magnetic field sensor with 24V max supply voltage, -40 to 150°C operating temp range, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level and BICMOS technology.
DRV5013AGQLPGMQ1
DRV5013AGQLPGMQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 12 mT, operating temperature range from -40 to 125 °C, and output current up to 30 A. It is ideal for automotive applications requiring precise current output in a compact rectangular package.
BU52012NVX-TR
ROHM
ROHM's BU52012NVX-TR is a magnetic field sensor with 1.65V to 3.6V supply voltage range, offering 0.9mT hysteresis and output of 0.20-1.60V analog voltage signal. Ideal for Hall effect applications, this rectangular sensor operates b/w -40°C to 85°C, consuming only 0.0125mA current in a compact package suitable for surface mount installations.
S-5712ANDL2-M3T1U
Ablic
Ablic's S-5712ANDL2-M3T1U is a magnetic field sensor with 1mT hysteresis, 3.5V max supply voltage, and -40 to 85°C operating temp range. Ideal for detecting magnetic fields in applications requiring voltage output sensors with omnidirectional input mode.
G-MRCO-028
TE Connectivity's G-MRCO-028 is a MAGNETIC FIELD SENSOR with 5V max supply voltage, -40 to 150°C operating temp range, and 4mA max current. Ideal for applications requiring ANALOG OUTPUT magnetic field sensing in various industries.
A1120ELHLX-T
A1120ELHLX-T by Allegro MicroSystems is a magnetic field sensor with 24V max supply voltage, 1mT hysteresis, and -40 to 85°C operating temp. Ideal for automotive applications due to AEC-Q100 screening level, BICMOS technology, and unipolar input mode.
TLE4906LXA
TLE4906LXA by Infineon is a magnetic field sensor with 2.7-18V supply, 1.5mT hysteresis, and 0.6V digital output range. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small rectangular package design and through-hole mounting feature.
DRV5055A4ELPGMQ1
DRV5055A4ELPGMQ1 by Texas Instruments is a magnetic field sensor with a max supply voltage of 3.63V and an output range of -1-1mA. It is commonly used in automotive applications due to its AEC-Q100 screening level and through-hole mounting feature.
SS494B-S
Honeywell SS494B-S is a magnetic field sensor with 3 terminals, operating voltage range of 4.5V to 10.5V, and sensitivity of 5.4mV/G. It has a single-ended analog current output interface, suitable for applications requiring precise magnetic field detection in temperatures ranging from -40°C to 150°C. Ideal for through-hole mounting setups due to its cylindrical shape and solder termination type.
DRV5023AJQLPGMQ1
DRV5023AJQLPGMQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 3.7 mT, operating temperature range from -40 to 125°C, and output current up to 30 A. Ideal for automotive applications due to AEC-Q100 screening level, it features a digital current output via open-drain interface in a rectangular package style.
OMH3075S
Tt Electronics Plc
OMH3075S by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 50mT. It operates in temperatures ranging from -55 to 125°C, making it suitable for various industrial applications requiring precise magnetic field detection. With an output range of 21mA and MIL-STD-883 Class S screening level, this sensor offers reliable performance in demanding environments.
DRV5033AJQDBZR
DRV5033AJQDBZR by Texas Instruments is a magnetic field sensor with hysteresis of 3.4 mT, operating voltage range from 2.5V to 38V, and output type as digital voltage. It is ideal for applications requiring precise magnetic field detection in a compact rectangular package, such as automotive sensors and industrial automation systems.
HAL504SF-K
TDK
HAL504SF-K by TDK is a magnetic field sensor with 24V max supply voltage, 5mT hysteresis, and 0-20mA analog current output. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small body dimensions and surface mounting feature.
DRV5011ADDMRT
Texas Instruments DRV5011ADDMRT is a magnetic field sensor with 5.5V max supply voltage, -40 to 135°C operating temp range, and 4mT hysteresis. Ideal for applications requiring current output sensing in a compact rectangular package.
DRV5013ADELPGMQ1
Texas Instruments' DRV5013ADELPGMQ1 is a magnetic field sensor with 2.7-38V supply voltage range, AEC-Q100 screening level, and 5.4mT hysteresis. Ideal for automotive applications due to -40 to 150°C operating temperature, 0-30mA current output, and latched bipolar input mode for precise magnetic field detection in a compact rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Micronas Semiconductor Holding Ag
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved