Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0.13-0.18V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Magnetic Field Sensors HAL504S-A attributes and parameters. Explore more Magnetic Field Sensors devices from Micronas Semiconductor Holding Ag
Additional Features:
Body Width:
Body Height:
Body Length/Diameter:
Housing:
Hysteresis:
Input Mode:
JESD-609 Code:
Maximum Magnetic Field Range:
Minimum Range Of Magnetic Field:
Mounting Feature:
No. of Terminals:
Maximum Operating Current:
Output (V):
Maximum Output Current:
Output Polarity:
Output Range:
Output Type:
Package Body Material:
Package Equivalence Code:
Package Shape or Style:
Power Supplies (V):
Sensors or Transducers Type:
Sub-Category:
Technology:
Terminal Finish:
Termination Type:
TDK-Micronas is the center of competence for magnetic-field sensors and CMOS integration within the TDK group. TDK-Micronas has gained operational excellence for sensors and actuators production in over 25 years of in-house manufacturing. It has been the first company to integrate a Hall-effect based sensor into CMOS technology in 1993. Since then, TDK-Micronas has shipped over six billion Hall sensors to the automotive and industrial market. The operational headquarters are located in Freiburg im Breisgau (Germany). Currently, TDK-Micronas employs around 1,000 people.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
International Devices
Comchip Technology
Rugao Dachang Electronic
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
New England Semiconductor
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Cheng-yi Electronic
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
TLE5011FUMA1
Infineon Technologies
TLE5011FUMA1 by Infineon is a magnetic field sensor with 5.5V max supply voltage, 30mT hysteresis, and 0.40-0.70V digital output range. Ideal for applications requiring precise magnetic field measurements in compact spaces due to its small body dimensions of 4" x 1.75mm x 5mm and surface mounting feature.
DRV5023AJQLPGQ1
DRV5023AJQLPGQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 3.7 mT, operating temperature range from -40 to 125°C, and output current up to 30 A. It is ideal for automotive applications requiring precise digital current output in a compact rectangular package.
ACS716KLATR-25CB-NL-T
Allegro MicroSystems' ACS716KLATR-25CB-NL-T is a magnetic field sensor with 16 terminals, offering 0.75% linearity and operating b/w -40°C to 125°C. It provides analog voltage output, consumes up to 11mA current at a max supply voltage of 3.6V. Ideal for applications requiring precise magnetic field sensing in compact spaces.
A1102LLHLX-T
Allegro MicroSystems' A1102LLHLX-T is a Hall effect magnetic field sensor with 3 terminals. It operates b/w -40 to 150°C, with a voltage output and hysteresis of 5.5 mT. Ideal for automotive applications due to its AEC-Q100 screening level and BICMOS technology.
SS411A-T3
Honeywell Sensing And Control
SS411A-T3 by Honeywell is a magnetic field sensor with a supply voltage range of 3.8-30V and output current up to 20A. It operates in temperatures from -40 to 150°C, suitable for various applications requiring precise detection of magnetic fields such as automotive sensors and industrial controls. The sensor features a rectangular plastic housing with through-hole mounting, making it versatile for different installation needs.
MRMS511X-001
Murata Manufacturing
MRMS511X-001 by Murata is a magnetic field sensor with 1.2" width, 0.55mm height, and 3.5V max supply voltage. It operates b/w -40 to 85°C, outputs 0.2-1.6V voltage range, and detects magnetic fields from 0.8mT to 2mT. Ideal for surface mount applications requiring precise magnetoresistive sensing capabilities.
AH1812-FA-7
Diodes Incorporated
Diodes Incorporated AH1812-FA-7 is a magnetic field sensor with 1mT hysteresis, 3.6V max supply voltage, and -40 to 85°C operating temp range. It's a Hall effect sensor with open-drain output used in applications requiring precise magnetic field detection.
DRV5053EAQDBZR
DRV5053EAQDBZR by Texas Instruments is a magnetic field sensor with voltage output. It operates b/w -40 to 125°C, with supply voltage range of 2.5-38V and max output current of 2.3A. Ideal for applications requiring precise sensing in compact spaces like automotive systems and industrial equipment.
APS12450LLHALX-0SLA
APS12450LLHALX-0SLA by Allegro MicroSystems is a magnetic field sensor with 30V max supply voltage, 4.5mT hysteresis, and -40 to 150°C operating temperature range. Ideal for applications requiring precise voltage output based on magnetic field strength in compact designs.
TLE49614MXTSA1
TLE49614MXTSA1 by Infineon: Magnetic Field Sensor with 32V max supply, 20mT hysteresis, and 0-25mA output. Ideal for Hall Effect applications in automotive and industrial sectors.
SS41F
SS41F by Honeywell is a magnetic field sensor with 4.5-24V supply voltage range, -40 to 150°C operating temperature, and 20mA output current. It is a Hall effect sensor measuring up to ±15mT magnetic field, suitable for through-hole mounting applications in various industries.
TLE49642MXTMA1
Infineon's TLE49642MXTMA1 is a Hall effect magnetic field sensor with 32V max supply voltage, 5.5mT hysteresis, and 0-25mA output range. Ideal for applications requiring precise current output sensing in a compact rectangular package.
A3212EELLT-T
Allegro MicroSystems' A3212EELLT-T is a magnetic field sensor with 3.5V max supply voltage, 0.59 mT hysteresis, and AEC-Q100 screening. Ideal for automotive applications due to its digital current output type, -40 to 85°C operating temperature range, and compact square package design.
AH1902-FT4-7
AH1902-FT4-7 by Diodes Incorporated is a magnetic field sensor with 1mT hysteresis, 0.20-1.60V output range, and -40 to 85°C operating temperature range. Ideal for applications requiring precise voltage output in a compact rectangular package for surface mount installations.
DRV5013FAQDBZR
DRV5013FAQDBZR by Texas Instruments is a magnetic field sensor with hysteresis of 2.6 mT, operating voltage range from 2.5V to 38V, and output type as digital voltage. It is ideal for applications requiring precise detection of magnetic fields in a compact rectangular package suitable for surface mount installations.
SS49E-F
SS49E-F by Honeywell is a Hall effect magnetic field sensor with a supply voltage range of 2.7V to 6.5V and linearity of -0.70%. It operates in temperatures from -40°C to 100°C, with an output type of analog current. Ideal for applications requiring precise detection of magnetic fields up to -65mT.
SS59ET
SS59ET by Honeywell is a magnetic field sensor with 6.5V max supply voltage, -40 to 100°C operating temp range, and 1-1.75V analog current output. Ideal for applications requiring precise sensing of magnetic fields in a compact rectangular package.
TLE4966-3K
TLE4966-3K by Infineon is a magnetic field sensor with 2.7-18V supply range, 5mT hysteresis, and 0-10mA digital current output. Ideal for applications requiring precise magnetic field detection in compact spaces like automotive sensors and industrial automation systems.
LIS2MDL
STMicroelectronics
STMicroelectronics' LIS2MDL is a magnetic field sensor with 1.71-3.6V supply voltage range, -40 to 85°C operating temperature, and digital voltage output. It is a Hall effect sensor in a square package suitable for surface mount applications in various industries like automotive and consumer electronics.
AH1808-W-7
AH1808-W-7 by Diodes Inc. is a magnetic field sensor with 5.5V max supply voltage, 1mT hysteresis, and 0.30V output range. Ideal for applications requiring non-inverting voltage output in a compact rectangular package for surface mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Micronas Semiconductor Holding Ag
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved