Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MIC69502WR-TR by Microchip is an adjustable positive single output LDO regulator with a max output current of 5A. Operating temp ranges from -40 to 125°C, making it suitable for various applications. Its small outline package and gull wing terminals make it ideal for surface mount designs.
Median Price
$3.820
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$1.595
100+ parts
$1.519
1k+ parts
$1.493
10k+ parts
-
Mouser Electronics
DigiKey
$3.213
Microchip Technology
$2.900
$2.800
$2.780
Verical
Nova Conductors
$2.915
Maritex
$3.291
$2.492
Chip Stock
Vyrian
IBS Electronics
$7.189
$3.380
Semtec, LLC
SPM Sales
Bristol Electronics
Ampacity Inc.
$2.380
Netroflash
$2.769
$2.711
Vigor
$2.980
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Lixinc
A-Z Elektronik GmbH
Futuretech Components
Authorized Procurement Solutions
West Coast Incorporated
The use of plastic/epoxy material makes the product lightweight and durable, ideal for portable and long-lasting applications.
The low maximum dropout voltage ensures efficient power regulation even when the input voltage is close to the output voltage, improving overall energy efficiency.
Being surface mountable makes installation and assembly easier, saving time and effort during the manufacturing process.
The wide operating temperature range ensures that the regulator can function effectively in various environmental conditions, making it versatile and reliable.
The rectangular shape allows for space-efficient placement on a circuit board, making it suitable for designs with limited space constraints.
The adjustable feature allows for fine-tuning of the output voltage, providing flexibility for different application requirements.
The high maximum output current capability makes the regulator suitable for powering a wide range of electronic devices or components with higher power demands.
Adjustable Regulators - Positive Single Output LDO MIC69502WR-TR attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from Microchip Technology
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
JESD-30 Code:
Length:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Minimum Output Voltage-1:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
MIC69502WR-TR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Wafer Fab Update Rev 17/Mar/2016
PCN Packaging - MBB/Label Chgs 16/Nov/2018
PCN Part Number - Micrel to Microchip PN Changes 7/Oct/2015
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
Weitronic Enterprise
ROHM
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NCP1117STAT3G
NCP1117STAT3G by Onsemi is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 1.2V. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3045IMSE#TRPBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HTSSOP; Terminal Form: GULL WING; Surface Mount: YES; Operating Temperature (TJ-Min): -40 Cel;
TPS7A4501KTTR
TPS7A4501KTTR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1.5 A and a dropout voltage of 0.45 V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
TPS74401RGWR
TPS74401RGWR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 3A and a dropout voltage of 0.24V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
MIC5239YMM-TR
MIC5239YMM-TR by Microchip is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.4V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
MIC5207YM5-TR
MIC5207YM5-TR by Microchip is an adjustable positive single output LDO regulator with a max output voltage of 15V and load regulation of 0.7%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM1117S-ADJ/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Seated Height: 4.8 mm; Width: 8.6 mm;
LT3080IT#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: ZIP; Terminal Form: THROUGH-HOLE; Package Style (Meter): FLANGE MOUNT; Adjustability: ADJUSTABLE;
MIC5209YM-TR
MIC5209YM-TR by Microchip Technology is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.6V. It is commonly used in applications requiring stable voltage regulation, such as power supplies for electronic devices.
LT1963AEFE#TRPBF
Analog Devices
LT1963AEFE#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 1.5A and a max dropout voltage of 0.55V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS73201QDBVRQ1
TPS73201QDBVRQ1 by Texas Instruments is an adjustable LDO regulator with a max output current of 0.25A and dropout voltage of 0.15V. Ideal for automotive applications due to AEC-Q100 screening, it operates b/w -40 to 125°C temperature range.
ISL80102IRAJZ-T7A
Renesas Electronics
ISL80102IRAJZ-T7A by Renesas Electronics is an adjustable positive single output LDO regulator with a max output current of 2A and a dropout voltage of 0.125V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline with a very thin profile, ideal for surface mount designs.
LT3080EMS8E#PBF
Analog Devices' LT3080EMS8E#PBF is an adjustable positive single output LDO regulator with a max output current of 1.1A and a max dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ISL80103IRAJZ-T7A
ISL80103IRAJZ-T7A by Renesas Electronics is an adjustable positive single output LDO regulator with a max output current of 3A and a dropout voltage of 0.12V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, heat sink/slug, very thin profile, ideal for surface mount assembly with a terminal pitch of 0.5mm.
SPX3819M5-L/TR
Exar
Exar's SPX3819M5-L/TR is an adjustable positive single output LDO regulator with a max output current of 0.5A and a dropout voltage of 0.7V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LT3041ADE#PBF
LT3041ADE#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 0.48V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
MIC94325YMT-TR
Micrel
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Seated Height: .6 mm; Technology: CMOS;
LT1965EMS8E#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HTSSOP; Terminal Form: GULL WING; Terminal Pitch: .65 mm; Nominal Dropout Voltage-1: .29 V;
LP2951ACSDX
LP2951ACSDX by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.1A and a nominal output voltage of 5V. It features a max dropout voltage of 0.6V, making it suitable for applications requiring precise voltage regulation in tight spaces with limited power supply margins. The device operates within a wide temperature range from -40°C to 125°C, ideal for various industrial and automotive electronics applications.
LT3086EFE#PBF
Analog Devices' LT3086EFE#PBF is an adjustable positive single output LDO regulator with a max output current of 2.1A and a max dropout voltage of 0.54V, suitable for applications requiring precise voltage regulation in compact spaces. Its package style includes a small outline, heat sink/slug, and thin profile design, making it ideal for surface mount installations where space is limited. Operating efficiently within a wide temperature range from -40°C to 125°C, this regulator offers excellent load regulation at just 0.25%.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MIC61300YMME-TR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSSOP; Terminal Form: GULL WING; Operating Temperature (TJ-Min): -40 Cel; Terminal Finish: MATTE TIN;
MIC61300YML-TR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; No. of Functions: 1; Adjustability: ADJUSTABLE;
MIC61300YMME
MIC61300YMME by Microchip Tech is an adjustable positive single output LDO regulator with a max output current of 3A and dropout voltage of 0.35V. It comes in a small outline package suitable for surface mount applications, offering precise load regulation at temperatures ranging from -40 to 125°C. Ideal for various electronic devices requiring stable voltage supply.
MIC61150YML-TR
MIC61150YML-TR by Microchip: Adjustable LDO Regulator with 1.5A output, 3V max voltage, and 0.2V dropout. Ideal for compact designs in automotive electronics, IoT devices, and portable gadgets due to its small outline package and wide operating temperature range from -40°C to 125°C.
MIC69303YME-TR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Terminal Form: GULL WING; Packing Method: TR; Package Shape: RECTANGULAR;
MIC69303YML-TR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSSON; Terminal Form: NO LEAD; JESD-30 Code: S-PDSO-N12; Terminal Pitch: .5 mm;
MIC69502WR
MIC69502WR by Microchip Technology is an adjustable positive single output LDO regulator with a max output current of 5A and dropout voltage of 0.25V. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. Its small outline package with gull wing terminals and matte tin finish offers ease of surface mounting for efficient power management solutions.
MIC69302WR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Terminal Pitch: 1.7 mm; Package Equivalence Code: SMSIP5H,.41,67TB; Qualification Status: Not Qualified;
MIC68220YML-TR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 20; Package Code: HVSON; Terminal Form: NO LEAD; Operating Temperature (TJ-Min): -40 Cel; JESD-609 Code: e4;
MIC68200YML-TR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Load Regulation (%): 1 %; Maximum Output Voltage-1: 5.5 V;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 7; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE; Nominal Dropout Voltage-1: .25 V; Maximum Time At Peak Reflow Temperature (s): 40;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Technology: BIPOLAR; Package Style (Meter): SMALL OUTLINE; No. of Functions: 1;
MIC69302WR-TR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; JESD-609 Code: e3; No. of Outputs: 1; Terminal Pitch: 1.7 mm;
MIC69302WU-TR
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Nominal Dropout Voltage-1: .275 V; Surface Mount: YES;
MIC69153YME-TR
MIC69153YME-TR by Microchip is an adjustable positive single output LDO regulator with a max output current of 1.5A and a max dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Adjustability: ADJUSTABLE; Terminal Finish: Matte Tin (Sn); Width: 8 mm;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Output Voltage-1: 5 V; Adjustability: ADJUSTABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved