Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MIC5317-3.3YM5-TR by Microchip is a Fixed Positive Single Output LDO Regulator with 3.3V nominal output voltage, 0.15A max output current, and 3% max voltage tolerance. It is used in applications requiring low dropout voltage, such as portable devices and consumer electronics due to its small form factor and high efficiency.
Median Price
$0.140
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Microchip Technology
1+ parts
$0.120
100+ parts
$0.090
1k+ parts
-
10k+ parts
Newark
$0.151
$0.145
$0.136
$0.130
Distrelec
$0.305
Master Electronics
$0.092
Verical
$0.116
Element14
$0.229
$0.225
RS (Exports)
$0.166
Farnell
$0.128
$0.125
Nova Conductors
$0.180
Maritex
$0.535
Chip Stock
Vyrian
IBS Electronics
NAC Semi
$0.184
ACDS - Activité Composants Distribution Service
Bristol Electronics
Semicontronic
$0.129
$0.126
Ampacity Inc.
Argo Parts USA
$0.165
$0.160
Vigor
$0.170
Bastille Electronics
$0.171
$0.162
Advanced Electronics
$2.542
$2.313
$2.084
Corohmni
$3.228
Modulus Dynamics
$3.836
Aztec Data Supply Inc.
$8.299
Continental Prestige Electronics
$0.127
Futuretech Components
RGB Technical Solutions
Lixinc
Eastek
Authorized Procurement Solutions
GreenTree Electronics
Robosynatics
$632.500
Lucentia Tech
This material provides durability and protection for the internal components of the regulator, ensuring a longer lifespan.
Low dropout voltage ensures efficient regulation of output voltage, improving energy efficiency.
Easy installation on a PCB, saving time and effort during assembly.
Wide operating temperature range allows for versatile use in different environments.
CMOS technology provides low power consumption and high noise immunity, ideal for sensitive applications.
Rectangular shape allows for compact placement on the PCB, saving space in the overall design.
Gull wing terminals facilitate easy soldering onto the PCB, ensuring a secure connection.
Wide temperature range allows for operation in harsh environmental conditions.
Tape and reel packaging method allows for automated assembly, increasing efficiency in production.
Stable minimum output voltage ensures reliable power supply to connected components.
Tight voltage tolerance ensures consistent performance of the regulator under varying load conditions.
Stable nominal output voltage suitable for a wide range of applications requiring a fixed voltage supply.
Sufficient number of terminals for connection to input and output power sources, as well as ground.
Compact and low-profile package design allows for space-saving installation in compact electronic devices.
Fixed output voltage eliminates the need for adjustment, simplifying the design and ensuring consistent performance.
Narrow terminal pitch allows for high-density mounting on the PCB, suitable for small footprint applications.
Low line regulation ensures stable output voltage under varying input voltage conditions, improving overall performance.
LDO regulator provides low dropout voltage, ensuring efficient voltage regulation with minimal power loss.
High-quality terminal finish for reliable solder connections and long-term durability.
Dual terminal position allows for versatile mounting options on the PCB, accommodating different layout requirements.
Stable maximum output voltage suitable for applications requiring a fixed voltage supply within this range.
Low-profile design with a low seated height for space-constrained applications.
Narrow width for compact placement on the PCB, saving space in the overall design.
Low load regulation ensures stable output voltage under varying load conditions, improving performance reliability.
Minimum input voltage requirement for reliable operation and regulation of the output voltage.
Sufficient output current capacity for powering a variety of components within the specified limit.
Supports reflow soldering process with a specified maximum time at peak temperature for reliability in assembly.
Supports high-temperature reflow soldering process, ensuring secure solder joints for reliable performance.
Low dropout voltage ensures efficient regulation of the output voltage with minimal power loss.
Compact length for space-saving installation in electronic devices with limited PCB real estate.
Maximum input voltage for reliable operation and regulation of the output voltage within the specified limit.
Absolute maximum input voltage limit to prevent damage to the regulator under overvoltage conditions.
Fixed Regulators - Positive Single Output LDO MIC5317-3.3YM5-TR attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Microchip Technology
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
MIC5317-3.3YM5-TR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
LL4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
LM1117MP-3.3/NOPB
LM1117MP-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, with surface mount capability and dual terminal position for easy integration into electronic designs.
LT1086IM-3.3#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
TLV1117-33CDCYG3
TLV1117-33CDCYG3 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.8A max output current, and 1.2V nominal dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package with surface mount capability.
LD1117DT33CTR
STMicroelectronics LD1117DT33CTR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1.3A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LM1117T-5.0/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %; Terminal Finish: Matte Tin (Sn);
LT1963AEST-3.3#TRPBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
LP2980IM5-3.0/NOPB
LP2980IM5-3.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3V nominal output voltage, 0.05A max output current, and 125°C max operating temperature. Ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.
LM2936HVMA-5.0
LM2936HVMA-5.0 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.4V, suitable for applications requiring stable voltage supply in a compact package. It operates within a wide temperature range from -40°C to 150°C, making it ideal for various electronic devices where precise voltage regulation is crucial.
SPX5205M5-L-3.3/TR
Sipex
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Seated Height: 1.45 mm; Package Body Material: PLASTIC/EPOXY;
LP2950CDTX-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
LM1084IS-5.0/NOPB
LM1084IS-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 5.5A and a nominal output voltage of 5V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With surface mount capability and small outline package style, it offers efficient performance in electronic devices.
LP5912-3.3DRVT
LP5912-3.3DRVT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, heat sink/slug, very thin profile, ideal for surface mount designs with limited space constraints.
NCP1117LPST50T3G
NCP1117LPST50T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 5V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
ADP7118AUJZ-5.0-R7
Analog Devices
ADP7118AUJZ-5.0-R7 by Analog Devices is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.2A max output current, and 2% max voltage tolerance. It is ideal for applications requiring low dropout voltage such as portable electronics and power management systems.
LM3480IM3X-12/NOPB
LM3480IM3X-12/NOPB by Texas Instruments is a 12V fixed positive single output LDO regulator with a max dropout voltage of 1.2V and max output current of 0.1A. It is ideal for applications requiring stable voltage regulation in compact electronic devices, offering high efficiency and low power consumption.
MIC37100-3.3WS
MIC37100-3.3WS by Microchip Technology is a fixed positive single output LDO regulator with 1A max output current, 3.3V nominal output voltage, and 2% max voltage tolerance. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and low dropout voltage of 0.5V.
AP2204K-3.3TRG1
Bcd Semiconductor Manufacturing
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Minimum Output Voltage-1: 3.234 V; Length: 2.92 mm;
NCP1117ST50T3G
NCP1117ST50T3G by Onsemi is a fixed positive single output LDO regulator with 1A max output current, 5V nominal output voltage, and 1.2V max dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact small outline package.
LM1117IMPX-5.0
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
TK71550SCL
Toko
TK71550SCL by Toko is a fixed positive single output LDO regulator with 5V nominal output voltage. It has a max dropout voltage of 0.33V and can handle up to 0.1A output current. Ideal for applications requiring stable voltage regulation in compact spaces, such as consumer electronics or IoT devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MIC5504-3.3YM5-TR
MIC5504-3.3YM5-TR by Microchip is a CMOS LDO regulator with 3.3V output voltage, 0.3A max output current, and 3% voltage tolerance. Ideal for applications requiring fixed positive single output regulators in automotive electronics, industrial controls, and consumer devices.
MIC5205-3.3YM5T&R
Micrel
MIC5205-3.3YM5T&R by Micrel is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It features a small outline, low profile package style suitable for surface mount applications, with an operating temperature range from -40 to 125°C making it ideal for various electronic devices requiring stable voltage regulation.
MIC5205-3.3YM5-TR
MIC5205-3.3YM5-TR by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It has a small outline package style, operates in temperatures ranging from -40 to 125°C, and is suitable for applications requiring stable voltage regulation in compact electronic devices.
MIC5504-3.3YM5-T5
MIC5504-3.3YM5-T5 by Microchip is a CMOS LDO regulator with 3.3V output, 0.3A max current, and 1.45mm seated height. Ideal for applications requiring fixed positive single output regulators in automotive electronics due to TS 16949 screening level and -40 to 125 °C operating temperature range.
MIC5205-5.0YM5-TR
MIC5205-5.0YM5-TR by Microchip is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.15A Max Output Current, and 2% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as portable electronics and IoT devices.
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Package Body Material: PLASTIC/EPOXY;
MIC5219-3.3YM5-TR
MIC5219-3.3YM5-TR by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It has a small outline package style, suitable for applications requiring low dropout voltage and precise voltage regulation in the temperature range of -40 to 125°C.
MIC5219-3.3YM5T&R
MIC5219-3.3YM5T&R by Micrel is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5A max output current. It features a small outline package, low profile design, and shrink pitch terminal style, making it suitable for applications requiring stable voltage regulation in compact spaces. Operating temperature range from -40 to 125°C ensures reliable performance in various environments.
MIC5317-3.3YM5-TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Output Voltage-1: 3.399 V; Package Style (Meter): SMALL OUTLINE, LOW PROFILE, SHRINK PITCH;
MIC5209-3.3YS
MIC5209-3.3YS by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5A max output current. It has a small outline package style, matte tin terminal finish, and operates b/w -40 to 125°C making it ideal for various electronic applications requiring stable voltage regulation in compact designs.
MIC5233-3.3YM5-TR
MIC5233-3.3YM5-TR by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.1A max output current, and 2% max voltage tolerance. It is ideal for applications requiring low dropout voltage and operates in temperatures ranging from -40 to 125°C.
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; JESD-30 Code: R-PDSO-G5;
MIC5209-3.3YS-TR
MIC5209-3.3YS-TR by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5A max output current. It has a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
MIC5239-3.3YS
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 32 V; Maximum Voltage Tolerance: 2 %;
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 32 V; Maximum Voltage Tolerance: 2 %;
MIC5233-3.3YM5-TRVAO
MIC5233-3.3YM5-TRVAO by Microchip Technology is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline, low profile package style with gull wing terminals and operates in an extended temperature range from -40 to 125°C. Ideal for applications requiring precise voltage regulation in automotive electronics or industrial control systems.
MIC5233-5.0YM5-TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Operating Temperature (TJ-Min): -40 Cel;
MIC5317-3.3YD5-T5
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Maximum Seated Height: 1 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved