Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP79402-I/SN by Microchip is a CMOS RTC with I2C interface, 64-word RAM, and interrupt capability. It operates b/w -40 to 85°C, ideal for industrial applications requiring real-time clock functionality in small outline packages. With a supply voltage range of 1.8-5.5V and low current draw of 3mA, it suits various timing needs efficiently.
Median Price
$1.040
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.748
100+ parts
$0.735
1k+ parts
-
10k+ parts
Microchip Technology
$0.910
$0.850
$0.830
DigiKey
Mouser Electronics
Farnell
$1.056
$0.970
$0.963
Newark
$1.200
$1.010
$0.874
Element14
$1.510
$1.330
Master Electronics
$1.029
$0.935
$0.876
Verical
$1.212
$1.100
Nova Conductors
$1.033
TME
$1.110
$0.980
NAC Semi
$1.170
Chip Stock
Vyrian
IBS Electronics
$1.451
$1.318
$1.235
Ampacity Inc.
$0.640
Semicontronic
$0.624
$0.621
Vigor
$0.900
Continental Prestige Electronics
$0.904
$0.813
Argo Parts USA
Corohmni
Aztec Data Supply Inc.
$25.160
Advanced Electronics
$39.915
$36.323
$32.730
Lixinc
RGB Technical Solutions
Futuretech Components
Authorized Procurement Solutions
Perfect Parts
Robosynatics
Lucentia Tech
Netroflash
$1.012
$0.981
$0.960
Kepictronics
This material provides durability and reliability for long-term use.
I2C allows for efficient communication with other devices, making integration easy.
The surface mount design saves space and simplifies the installation process.
With a high maximum supply voltage, this product can handle various power sources.
The wide on-chip data RAM allows for storing and processing a significant amount of information.
TS 16949 screening level ensures high quality and reliability of the product.
The rectangular shape makes it easy to fit this timer and real-time clock into different types of devices.
This product is versatile and can operate with multiple power supply options.
With 8 terminals, this product offers flexibility for connecting to other components.
The interrupt capability allows for timely responses to external events or signals.
The small outline package style saves space and is ideal for compact designs.
The low minimum supply voltage ensures energy efficiency and compatibility with various power sources.
Timers & Real-Time Clocks MCP79402-I/SN attributes and parameters. Explore more Timers & Real-Time Clocks devices from Microchip Technology
Maximum Clock Frequency:
External Data Bus Width:
Information Access Method:
Interrupt Capability:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
No. of Timers:
On Chip Data RAM Width:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
RAM Words:
Screening Level:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Minimum Time:
Maximum Time At Peak Reflow Temperature (s):
Volatile:
Width:
Peripheral IC Type:
MCP79402-I/SN Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Manufacturing Change 07/Apr/2022
PCN Packaging - Label and Packing Changes 23/Sep/2015 Packing Changes 10/Oct/2016
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rfe International
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
LM555CN
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
SPC TECHNOLOGY/ MULTICOMP
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Harris Semiconductor
DS1302S/T&R
Maxim Integrated
DS1302S/T&R by Maxim Integrated is a CMOS timer and real-time clock with a max clock frequency of 0.032 MHz. It has a small outline package shape, operates at temperatures b/w 0 to 70 °C, and can be powered by either 3V or 5V supplies. This IC is commonly used in applications requiring precise timekeeping and scheduling functions.
RTC-8564JEB
Seiko Epson
RTC-8564JEB by Seiko Epson is a CMOS timer & real-time clock with I2C access, suitable for industrial applications. It operates b/w -40 to 85 °C, with supply voltage ranging from 1.8V to 5.5V. This small outline package has 20 terminals in a rectangular shape, making it ideal for surface mount assembly.
DS3231MZ+
Analog Devices
DS3231MZ+ by Analog Devices is a CMOS TIMER & REAL TIME CLOCK with I2C interface. It operates b/w -40 to 85 °C, with supply voltage of 2.3-5.5 V. Suitable for industrial applications due to interrupt capability and small outline package style.
DS1251YP--70-IND
Dallas Semiconductor
DS1251YP--70-IND by Dallas Semiconductor is a CMOS TIMER & REAL TIME CLOCK with 8-bit External Data Bus Width. It operates in INDUSTRIAL Temperature Grade (-40 to 85 °C) and has a RECTANGULAR package style with 34 terminals. Suitable for applications requiring PARALLEL, DIRECT ADDRESS access method at supply voltages b/w 4.5V to 5.5V.
DS12887+
DS12887+ by Analog Devices is a CMOS TIMER with 24 terminals, operating at 5V. It has interrupt capability and supports parallel/muxed bus access method. Ideal for real-time clock applications with a max clock frequency of 0.032 MHz and temperature range from 0 to 70 °C.
RX-8581NBB-0
Epson Toyocom
RX-8581NBB-0 by Epson Toyocom is a CMOS timer & real-time clock with I2C access, suitable for industrial applications. It operates b/w -40 to 85°C, with supply voltage ranging from 1.8V to 5.5V. This small outline package has 22 terminals and measures 4.8mm in width, making it ideal for surface mount designs.
CDP68HC68T1EZ
Renesas Electronics
Renesas Electronics CDP68HC68T1EZ is a CMOS timer/real-time clock IC with 3-wire/SPI access, 32 RAM words, and 4 MHz max clock frequency. It operates in industrial temperature range (-40 to 85°C) and has interrupt capability. Widely used in applications requiring precise timekeeping functions.
M41T83ZMY6F
STMicroelectronics M41T83ZMY6F is a CMOS TIMER & REAL TIME CLOCK with SERIAL(I2C) access, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, with supply voltage range of 2.38-5.5V. Ideal for industrial applications requiring accurate timekeeping in compact designs.
PCF85063TP/1,118
NXP Semiconductors
PCF85063TP/1,118 by NXP Semiconductors is a SERIAL 2 WIRE/I2C RTC with 8 terminals. Operating temperature range from -40 to 85 °C makes it suitable for industrial applications. This CMOS technology device has a small outline package and is surface mountable.
PCF8563TS/5
NXP Semiconductors' PCF8563TS/5 is an I2C RTC with 1.8-5.5V supply, -40 to 85°C temp range, and 0.032 MHz clock frequency. Ideal for industrial applications requiring a compact 8-terminal package with TIMER & REAL TIME CLOCK functionality in a small outline design.
M41T81M6
M41T81M6 by STMicroelectronics is a CMOS timer/real-time clock IC with I2C access, interrupt capability, and 1.75mm seated height. Operating b/w -40 to 85°C, it has a clock frequency of 0.032 MHz and requires 2-5.5V supply voltage. Ideal for industrial applications requiring precise timekeeping in compact designs.
CS82C54Z96
Intersil
TIMER, PROGRAMMABLE; Temperature Grade: COMMERCIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
PT7C4372ALEX
PT7C4372ALEX by Diodes Inc. is a CMOS timer/real-time clock IC with I2C access, 8 terminals, and interrupt capability. It operates b/w -40 to 85°C, with supply voltage ranging from 1.8V to 6V. Ideal for industrial applications requiring precise timekeeping in compact designs.
HEF4541BT,518
HEF4541BT,518 by NXP Semiconductors is a CMOS timer IC with 14 terminals. It operates b/w -40 to 85 °C and has a max supply voltage of 15 V. Suitable for industrial applications, it features parallel access method and is surface mountable.
DS1394U-33+T&R
Analog Devices' DS1394U-33+T&R is a CMOS timer with 10 terminals, operating from -40 to 85°C. It uses a 2-wire/I2C interface, has a clock frequency of 0.032 MHz, and supports supply voltages from 2.97V to 5.5V. Ideal for industrial applications requiring precise timekeeping in compact designs.
X1226S8I
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 20; Package Code: SOJ; Package Shape: RECTANGULAR;
IS82C54Z
TIMER, PROGRAMMABLE; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 28; Package Code: QCCJ; Package Shape: SQUARE;
DS1337
Timers or RTCs; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MCP79412-I/SN
MCP79412-I/SN by Microchip Technology is a CMOS Timer & Real-Time Clock with I2C access, 64 RAM words, and interrupt capability. It operates b/w -40 to 85 °C, has a max supply voltage of 5.5 V, and requires only 3 mA current. Ideal for industrial applications requiring precise timekeeping in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP79410-I/SN
MCP79410-I/SN by Microchip Tech: I2C access, 5.5V max supply, 85°C max temp. Ideal for industrial timers & real-time clocks with 64 RAM words and interrupt capability. Small outline package, suitable for surface mount applications.
MCP7940N-I/SN
MCP7940N-I/SN by Microchip Technology is a CMOS TIMER & REAL TIME CLOCK with I2C access. It operates at 1.8-5.5V, has 64 RAM words, and interrupts capability. Suitable for industrial applications, it has a small outline package style and operates b/w -40 to 85°C temperature range.
MCP79510-I/MS
MCP79510-I/MS by Microchip Tech is a TIMER & REAL TIME CLOCK IC with SERIAL(SPI) access, 3.6V max supply voltage, and 1/100s min time capability. Ideal for industrial applications requiring precise timing in a compact package with 10 terminals and interrupt capability.
MCP79410-I/MS
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: SQUARE;
MCP79410-I/SNVAO
MCP79410-I/SNVAO by Microchip Tech is a Real-Time Clock with I2C access, 64 RAM words, and interrupt capability. It operates b/w -40 to 85°C, ideal for automotive applications requiring precise timekeeping in a compact package. With a supply voltage range of 1.8-5.5V and small outline design, it's suitable for various electronic devices.
MCP7940NT-I/SN
MCP7940NT-I/SN by Microchip Technology is a CMOS RTC with I2C interface, 64-word RAM, interrupt capability, and 1.8-5.5V supply range. Ideal for industrial applications requiring real-time clock functions in a compact SMD package with AEC-Q100 screening level.
MCP7940N-I/ST
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
MCP7940N-I/MS
MCP7940N-I/MS by Microchip Technology is a CMOS RTC with I2C interface, 64 RAM words, and interrupt capability. It operates b/w -40 to 85°C, with supply voltage range of 1.8-5.5V. Ideal for industrial applications requiring real-time clock functionality in a compact form factor.
MCP79410T-I/SN
MCP79410T-I/SN by Microchip Tech: I2C access, 5.5V max supply, 85°C temp; for timers & real-time clocks in industrial settings. Features 8-bit RAM, interrupt capability, and operates at 0.032 MHz clock frequency. Small outline package with matte tin finish and dual position terminals.
MCP7940NT-I/MNY
MCP7940NT-I/MNY by Microchip Tech is a Real-Time Clock with I2C interface, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, has a supply voltage range of 1.8-5.5V, and features a small outline package suitable for industrial applications.
MCP7940N-I/P
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MCP79510T-I/MS
TIMER, REAL TIME CLOCK; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
MCP79410T-I/MNY
MCP79410T-I/MNY by Microchip Tech is a CMOS RTC with I2C interface, 8 RAM words, and interrupt capability. It operates b/w -40 to 85 °C, with max supply voltage of 5.5 V. Ideal for industrial applications requiring accurate timekeeping in compact designs.
MCP7940M-I/SN
MCP79410-I/ST
MCP79410-I/ST by Microchip Tech is a CMOS RTC with I2C interface, 64 RAM words, and interrupt capability. It operates b/w -40 to 85°C, has 8 terminals in a small outline package, and requires 1.8-5.5V supply voltage. Ideal for industrial applications requiring accurate timekeeping and timer functions.
MCP79400-I/SN
MCP7940MT-I/SN
MCP7940MT-I/SN by Microchip Technology is a Real-Time Clock with I2C interface, 8-bit RAM, and interrupt capability. It operates b/w -40 to 85°C, with supply voltage range of 1.8-5.5V. Ideal for applications requiring precise timekeeping in industrial settings.
MCP7940NT-I/MS
MCP7940NT-E/MS
TIMER, REAL TIME CLOCK; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved