Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
INSTRUMENTATION AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
RGB Technical Solutions
1+ parts
100+ parts
1k+ parts
10k+ parts
Instrumentation Amplifiers MCP6G01T-E/SL attributes and parameters. Explore more Instrumentation Amplifiers devices from Microchip Technology
Amplifier Type:
Total Functions:
Sub-Category:
Nominal Bandwidth (3dB):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Nominal Voltage Gain:
Maximum Voltage Gain:
Maximum Non Linearity:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Shape:
Package Style:
MCP6G01T-E/SL Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
Taiwan Semiconductor
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Toshiba
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
INA821IDRGT
Texas Instruments
INA821IDRGT by Texas Instruments is an instrumentation amplifier with 35uV max input offset voltage, 4.7MHz bandwidth, and 136dB min CMRR. Ideal for automotive applications due to its -40 to 125°C operating temperature range and small outline package style. It offers high precision amplification with a max voltage gain of 10,000.
AD8226BRMZ-R7
AD8226BRMZ-R7 by Analog Devices is an instrumentation amplifier with a supply voltage of +-15V, operating temperature range of -40 to 125°C, and max supply current of 0.6mA. It is ideal for automotive applications due to its nickel palladium gold terminal finish and small outline package style.
LT1920CS8#PBF
LT1920CS8#PBF by Analog Devices is an instrumentation amplifier with 185uV max input offset voltage, 0.002uA max average bias current, and 1MHz nominal bandwidth. Ideal for precision signal conditioning in commercial applications due to its high gain, low offset voltage, and wide temperature range.
AD8220BRMZ
AD8220BRMZ by Analog Devices is an instrumentation amplifier with 125uV max input offset voltage, 80dB nominal CMRR, and 0.75mA max supply current. Ideal for industrial applications requiring precise signal amplification in a compact package with dual terminal position and -40 to 85°C operating temperature range.
INA331AIDGKTG4
Texas Instruments' INA331AIDGKTG4 is an instrumentation amplifier with 500uV max input offset voltage, 2MHz bandwidth, and 5V nominal voltage. Ideal for military applications due to its -55 to 125 °C operating temperature range and CMOS technology.
INA114BU
INA114BU by Texas Instruments is an instrumentation amplifier with 50uV max input offset voltage, 1MHz nominal bandwidth, and 115dB min CMRR. Ideal for industrial applications requiring precise signal amplification in a compact package. Features include +-15V power supplies, 3mA max supply current, and -40 to 85°C operating temperature range.
AD627AN
AD627AN by Analog Devices is an instrumentation amplifier with 200uV max input offset voltage, 0.01uA max average bias current, and 5 nominal voltage. Widely used in industrial applications for precise signal amplification due to its high gain range of 5-1000 and wide operating temperature range from -40 to 85 °C.
ADA4255ACPZ-R7
ADA4255ACPZ-R7 by Analog Devices is an instrumentation amplifier with 14uV max input offset voltage, 0.014uA max average bias current, and 1.8MHz nominal bandwidth. Ideal for precision signal conditioning in applications requiring high accuracy and low noise amplification.
INA111AP
Burr-Brown Corporation
INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
INA128UAE4
INA128UAE4 by Texas Instruments is an instrumentation amplifier with a max voltage gain of 10000 and bandwidth of 1.3 MHz. It operates at temperatures from -40 to 125 °C, making it suitable for automotive applications requiring precise signal amplification in compact spaces. With low bias current and high Bull Wing terminals, it ensures accurate measurements in harsh environments.
ISL28633FVZ-T13
Renesas Electronics
ISL28633FVZ-T13 by Renesas Electronics is an instrumentation amplifier with a max input offset voltage of 10uV, ideal for automotive applications. It operates at a nominal voltage of 5V and has a max supply current of 3.6mA, making it suitable for precision signal conditioning in harsh environments. With a min common mode reject ratio of 97dB, this surface-mount device offers high performance in compact dimensions.
PGA204BUE4
PGA204BUE4 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 60uV, ideal for industrial applications. It offers a nominal bandwidth of 1MHz and a max voltage gain of 1000, making it suitable for precise signal amplification in various electronic systems. With a compact rectangular package style and surface mount capability, this amplifier is versatile and efficient for space-constrained designs.
INA121UA
INA121UA by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 500uV, ideal for industrial applications. It offers a max supply current of 0.53mA and a nominal bandwidth of 0.6MHz, making it suitable for precise signal amplification in harsh environments. With a compact rectangular package style and surface mount capability, it provides high performance in a small footprint.
INA2128UA/1K
INA2128UA/1K by Texas Instruments is a 2-function instrumentation amplifier with max input offset voltage of 225uV and max bias current of 0.01uA. Ideal for industrial applications, it offers a nominal bandwidth of 1.3MHz, max voltage gain of 10000, and operates in temperatures ranging from -40 to 85 °C.
AD8250ARMZ-RL
AD8250ARMZ-RL by Analog Devices is an instrumentation amplifier with a max bandwidth of 10 MHz and a voltage gain of up to 10. It operates within a temperature range of -40 to 85 °C and has low bias current, making it ideal for industrial applications requiring precise signal amplification in compact spaces.
INA141UA/2K5
INA141UA/2K5 by Texas Instruments is an instrumentation amplifier with 50uV max input offset voltage, 1MHz nominal bandwidth, and 117dB min common mode reject ratio. Ideal for industrial applications requiring precise signal amplification in a compact package with -40 to 85°C operating temperature range.
INA826AIDRGT
INA826AIDRGT by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 150uV and max bias current of 0.095uA. It operates at a nominal voltage of +-15V, making it suitable for automotive applications requiring high precision amplification in a compact package. With a bandwidth of 1MHz and low non-linearity of 0.002%, this IC offers excellent performance in temperature-sensitive environments.
XTR105UA/2K5
XTR105UA/2K5 by Texas Instruments is an instrumentation amplifier with 25uV max input offset voltage, 0.05uA max average bias current, and 24V nominal voltage. Ideal for industrial applications due to its high common mode reject ratio of 86dB and wide operating temperature range from -40°C to 85°C.
INA818IDR
Texas Instruments' INA818IDR is an instrumentation amplifier with a max input offset voltage of 35uV and max bias current of 0.002uA. Ideal for automotive applications, it offers a nominal bandwidth of 2MHz and a max voltage gain of 10000, making it suitable for precision signal amplification in harsh environments.
INA332AIDGKRG4
INA332AIDGKRG4 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 8000 uV and a nominal voltage of 5V. It features a small outline package style, suitable for military-grade applications requiring high common mode rejection ratio and low bias current at 25°C. With a bandwidth of 2 MHz and terminal pitch of 0.65mm, it is ideal for precision signal amplification in compact electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved