Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP4151-502E/MS by Microchip is a 5000 ohm digital potentiometer with linear resistance law. It operates at 1.8/5 V, has 257 positions, and a bandwidth of 2 kHz. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact square package style.
Median Price
$1.200
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Microchip Technology
$0.890
$0.870
$0.850
DigiKey
NAC Semi
$1.180
$1.070
$0.960
Vyrian
Nova Conductors
LIBRA Elektronik GmbH
Vigor
$0.950
Ampacity Inc.
$1.020
Semicontronic
$0.994
$0.989
Aztec Data Supply Inc.
$19.800
Corohmni
$23.555
Lixinc
Continental Prestige Electronics
West Coast Incorporated
Bastille Electronics
Argo Parts USA
Plastic/Epoxy material makes the product lightweight and durable, ideal for portable electronics.
Surface mount design makes installation and soldering easier, saving time and effort.
Low temperature coefficient ensures stable performance over a wide range of temperatures.
Square package shape allows for efficient placement on circuit boards, saving space.
Increment/decrement control interface provides easy adjustment of resistance value.
5000 ohm total resistance offers a wide range of adjustment options for different applications.
High maximum resistor terminal voltage allows for compatibility with various voltage levels.
Support for multiple power supply voltages provides flexibility in system design.
8 terminals allow for precise control and adjustment of resistance values.
Compact package style with a thin profile and shrink pitch saves space on the circuit board.
High maximum operating temperature ensures reliability in harsh environments.
Wide operating temperature range allows for use in both hot and cold conditions.
Matte tin terminal finish provides good conductivity and solderability.
Dual terminal position allows for multiple connection options and flexibility in circuit design.
Low seated height makes the product suitable for applications with limited space.
High resistance tolerance ensures accurate and reliable performance.
Compact width dimensions facilitate easy integration into circuit designs.
257 positions provide fine adjustment resolution for precise tuning of resistance values.
Short length design saves space on the circuit board.
Automotive temperature grade ensures reliable performance in automotive applications.
CMOS technology ensures low power consumption and high reliability.
High nominal bandwidth allows for fast and responsive adjustment of resistance values.
Gull wing terminal form provides secure connection and ease of soldering.
Low maximum supply current minimizes power consumption and heat generation.
Digital potentiometer converter type offers precise and digital control of resistance values.
Support for 5V nominal supply voltage ensures compatibility with standard power sources.
Fine terminal pitch allows for compact design and easy PCB layout.
Support for 0V minimum resistor terminal voltage allows for use in a wide range of applications.
Digital Potentiometers (DigiPOT) MCP4151-502E/MS attributes and parameters. Explore more Digital Potentiometers (DigiPOT) devices from Microchip Technology
Technology:
Sub-Category:
Nominal Bandwidth:
Resistance Law:
Nominal Total Resistance:
Control Interface:
No. of Functions:
Maximum Resistance Tolerance:
Nominal Supply Voltage:
Minimum Resistor Terminal Voltage:
Maximum Resistor Terminal Voltage:
Maximum Supply Current:
Minimum Operating Temperature:
Maximum Operating Temperature:
Temperature Grade:
Nominal Temperature Coefficient:
Moisture Sensitivity Level (MSL):
Terminal Form:
Terminal Position:
No. of Terminals:
Terminal Finish:
Terminal Pitch:
No. of Positions:
Maximum Seated Height:
Width:
Length:
Package Shape:
Package Body Material:
Package Style:
Package Code:
Package Equivalence Code:
Qualified:
JESD-30 Code:
JESD-609 Code:
MCP4151-502E/MS Converters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Bond Wire Qualification 08/Jun/2016
PCN Assembly/Origin - Mult Devices 23/May/2018
PCN Packaging - Label and Packing Changes 23/Sep/2015 Packing Changes 10/Oct/2016
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Diotec Semiconductor Ag
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
EU2B-YS3303C
Idec
ROTARY SWITCH;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
Continental Device India
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99WT1G
Fairchild Semiconductor
AD8402ARZ100
Analog Devices
AD8402ARZ100 by Analog Devices is a 3-wire serial controlled digital potentiometer with 100k ohm total resistance, 256 positions, and linear resistance law. It operates b/w -40 to 125 °C and is ideal for automotive applications due to its small outline package and CMOS technology.
X9258UV24IZ-2.7
Renesas Electronics X9258UV24IZ-2.7 is a 2-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 256 positions, and 300 ppm/°C temperature coefficient. Ideal for industrial applications requiring precise resistance adjustments in compact designs.
DS1803E-010
Dallas Semiconductor
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
AD5160BRJZ50-R2
AD5160BRJZ50-R2 by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 256 positions, and 45 ppm/°C temperature coefficient. It is ideal for automotive applications due to its low profile design, -40 to 125 °C operating temperature range, and matte tin terminal finish.
MCP45HV51-502E/MQ
MCP45HV51-502E/MQ by Microchip is a 2-WIRE SERIAL Digital Potentiometer with 100k ohm resistance, 256 positions, and 20% tolerance. Ideal for automotive applications due to AEC-Q100 screening and -40 to 125 °C operating temperature range. Features include linear resistance law, low supply current of 0.65 mA, and compact square package design.
DS1855E-010
Maxim Integrated
DS1855E-010 by Maxim Integrated is a 2-function digital potentiometer with 10k ohm total resistance, controlled via 2-wire serial interface. It operates in industrial temperature range (-40 to 85°C) and has a bandwidth of 1 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
AD5206BRU10-REEL7
AD5206BRU10-REEL7 by Analog Devices is a 3-wire serial controlled digital potentiometer with 6 functions, 10000 ohm total resistance, and 256 positions. It operates in industrial temperature range (-40 to 85 °C) and has a bandwidth of 0.721 kHz. Ideal for applications requiring precise resistance adjustments in compact spaces.
MCP4161-103E/MS
MCP4161-103E/MS by Microchip is a 10k ohm digital potentiometer with linear resistance law and 150 ppm/°C temperature coefficient. It operates at -40 to 125 °C, has 129 positions, and uses INCREMENT/DECREMENT control interface. Ideal for automotive applications due to its small size, low power consumption (1 mA), and wide operating temperature range.
MCP4252-103E/UN
MCP4252-103E/UN by Microchip is a 10k ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C and has a bandwidth of 1 kHz. Ideal for automotive applications, it features increment/decrement control interface and operates on 1.8/5 V supplies.
AD5242BRU1M
AD5242BRU1M by Analog Devices is a 2-function digital potentiometer with 1000000 ohm total resistance, controlled via 2-wire serial interface. It operates in industrial temperature range (-40 to 105 °C) and has a bandwidth of 0.006 kHz. Ideal for applications requiring precise resistance adjustments in compact designs.
AD5160BRJZ100-RL7
AD5160BRJZ100-RL7 by Analog Devices is a 3-WIRE SERIAL digital potentiometer with 100k ohm resistance, suitable for automotive applications. It has a temperature coefficient of 45 ppm/°C and operates b/w -40 to 125 °C, making it ideal for precise voltage control in compact electronic systems. The package style is small outline with low profile, offering high performance in limited space environments.
MAX5455EUD+
ISL22316WFU10Z
Intersil
DIGITAL POTENTIOMETER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
DS1804Z-010/GH9
DIGITAL POTENTIOMETER;
DS3501U+
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
MCP4441-104E/ML
MCP4441-104E/ML by Microchip is a 4-function digital potentiometer with 100kΩ total resistance, 2-wire serial control interface, and operates at -40 to 125°C. Ideal for automotive applications due to TS16949 screening level, it has a max terminal voltage of 5.5V and low supply current of 0.6mA.
DS1267S-050
DS1267S-050 by Maxim Integrated is a 3-WIRE SERIAL digital potentiometer with 50000 ohm total resistance and 256 positions. It operates at -40 to 85 °C, suitable for industrial applications requiring precise resistance adjustments in compact designs. The device features a linear resistance law and 20% tolerance, making it ideal for fine-tuning circuits with its small outline package.
MCP4261-503E/SL
MCP4261-503E/SL by Microchip is a 50k ohm digital potentiometer with linear resistance law, 257 positions, and 150 ppm/°C temperature coefficient. It operates at -40 to 125 °C, suitable for automotive applications requiring precise incremental/decremental control in compact designs.
MCP4261-103E/P
MCP4261-103E/P by Microchip Tech is a 10k ohm DigiPOT with linear resistance law, 150 ppm/°C temp coefficient, and 257 positions. It operates at -40 to 125 °C, ideal for automotive applications requiring precise digital potentiometer control in a compact rectangular package.
MAX5479ETE#TG16
MAX5479ETE#TG16 by Maxim Integrated is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, 256 positions, and linear resistance law. It operates in industrial temperature range (-40 to 85 °C) and is suitable for applications requiring precise resistance adjustments in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP41010-I/SN
MCP41010-I/SN by Microchip is a 3-WIRE SERIAL digital potentiometer with 10000 ohm resistance, 256 positions, and 20% tolerance. It operates at -40 to 85 °C and has a CMOS technology with 1 kHz bandwidth. Ideal for industrial applications requiring precise resistance adjustments in compact designs.
MCP4011-103E/SN
MCP4011-103E/SN by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C, has 64 positions, and uses INCREMENT/DECREMENT control interface. Ideal for automotive applications due to TS 16949 screening level and CMOS technology.
MCP4021-103E/SN
MCP4021-103E/SN by Microchip is a digital potentiometer with 10000 ohm resistance, 150 ppm/°C temp coefficient, and 1 kHz bandwidth. It is used in automotive applications for increment/decrement control interface, with 64 positions and small outline package style.
MCP40D18T-103E/LT
MCP40D18T-103E/LT by Microchip is a 2-WIRE SERIAL digital potentiometer with 10000 ohm resistance, suitable for automotive applications. It operates at -40 to 125 °C and has a max supply current of 0.08 mA. The device features a small outline package with 128 positions and is designed for precise voltage control in tight spaces.
MCP4651T-103E/ST
MCP4651T-103E/ST by Microchip is a 2-WIRE SERIAL digital potentiometer with 100k ohm total resistance, suitable for automotive applications. It operates at -40 to 125 °C and has a bandwidth of 2 kHz. With a compact design and low power consumption of 0.6 mA, it's ideal for space-constrained environments requiring precise resistance adjustments.
MCP41050-I/SN
MCP41050-I/SN by Microchip Tech is a 3-WIRE SERIAL digital potentiometer with 50000 ohm total resistance, 256 positions, and 20% tolerance. It operates at -40 to 85 °C for industrial applications, offering precise voltage control with 0.6 mA supply current.
MCP41HV51-103E/ST
MCP41HV51-103E/ST by Microchip is a 3-WIRE SERIAL digital potentiometer with 100k ohm resistance, 256 positions, and 20% tolerance. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage of 3V. Its compact design features a small outline package with dual terminals and matte tin finish.
MCP4021-502E/SN
DIGITAL POTENTIOMETER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
MCP4017T-104E/LT
MCP4017T-104E/LT by Microchip is a 2-WIRE SERIAL digital potentiometer with 100000 ohm resistance, 128 positions, and 150 ppm/°C temperature coefficient. It is used in automotive applications due to its TS16949 screening level and -40 to 125 °C operating temperature range.
MCP40D19T-503E/LT
MCP40D19T-503E/LT by Microchip Technology is a digital potentiometer with a nominal total resistance of 50k ohm and a max resistor terminal voltage of 5.5V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
MCP40D18T-104E/LT
DIGITAL POTENTIOMETER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
MCP4131-103E/P
DIGITAL POTENTIOMETER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MCP42050-I/SL
DIGITAL POTENTIOMETER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
MCP41HV51-104E/ST
MCP41HV51-104E/ST by Microchip is a 3-WIRE SERIAL digital potentiometer with 100000 ohm total resistance, 256 positions, and 20% resistance tolerance. It operates in automotive grade applications at -40 to 125 °C, with a supply voltage of 3 V and max current draw of 0.3 mA. Ideal for fine-tuning circuits in automotive electronics.
MCP4017T-503E/LT
MCP41HV51-503E/ST
MCP41HV51-503E/ST by Microchip is a 3-WIRE SERIAL digital potentiometer with 100000 ohm resistance, 256 positions, and 20% tolerance. It operates b/w -40 to 125 °C and has a max voltage of 18 V. Ideal for automotive applications due to its TS16949 screening level and small form factor.
MCP42010-I/SL
MCP42010-I/SL by Microchip is a 3-WIRE SERIAL digital potentiometer with 2 functions, 10000 ohm total resistance, and 256 positions. It operates at -40 to 85 °C for industrial applications, offering precise control with a linear resistance law and max voltage of 5 V.
MCP4011T-103E/MC
MCP4011T-103E/MC by Microchip is a 10000 ohm digital potentiometer with linear resistance law. It operates at -40 to 125 °C, suitable for automotive applications. Features include 64 positions, 150 ppm/°C temp coefficient, and INCREMENT/DECREMENT control interface.
MCP4451-103E/ST
MCP4451-103E/ST by Microchip is a 2-WIRE SERIAL Digital Potentiometer with 100k ohm resistance, 4 functions, and 150 ppm/°C temperature coefficient. Ideal for automotive applications, it operates b/w -40 to 125 °C with a max supply current of 0.6 mA.
MCP45HV51-103E/ST
DIGITAL POTENTIOMETER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved